Philips CD Player AZ302S User Manual

AZ302S  
CD Soundmachine  
Register your product and get support at  
User Manual  
 
2
DBB  
ON  
OFF  
@
!
$
6 x R14 • UM-2 • C-CELLS  
MW FM  
OFF  
CD  
-
LINE IN  
9
#
 
7
3
8
4
5
PROG  
6
X
ALL  
 
English  
Controls  
Congratulations on your purchase and  
welcome to Philips!  
Bottom panel  
$ Battery door Press on the arrow and  
push to insert 6 x 1.5V R-14/ UM-2/ C-  
cells.  
To fully benefit from the support that  
Philips offers, register your product at  
CAUTION  
Supplied Accessories  
– AC power cord  
– Visible and invisible laser radia-  
tion. If the cover is open, do not  
look at the beam.  
– High voltage! Do not open.You  
run the risk of getting an electric  
shock.The machine does not con-  
tain any user-serviceable parts.  
– Modification of the product  
could result in hazardous radia-  
tion of EMC or other unsafe oper-  
ation.  
Top/front panels (See 1)  
1
2
VOLUME  
adjusts volume level.  
43 For MP3-CD only: select albums.  
3 MODE – selects different play modes:  
e.g. REPEAT or SHUFFLE (random  
order)  
starts or pause CD playback  
selects the next/previous track  
.
4
2 ;  
§
– searches forwards/backwards (press and  
hold the button) within the current track  
9
stops disc playback;  
erases a program  
5 PROG – programs tracks and reviews the  
program  
6 LIFTTO OPEN – opens/closes the CD  
door.  
7 TUNING – tunes to radio stations  
8
9
Display  
shows the CD functions  
Back panel (See 1 and 2)  
Source selector: CD, FM, MW, OFF  
selects CD or radio source of sound  
power off switch  
0 Telescopic antenna - improves FM recep-  
tion.  
! AC MAINS~ - inlet for power cord.  
@
#
DBB  
turns the bass enhancement on/off.  
LINE-IN inlet for external audio source.  
 
Power Supply  
General Operation  
thunderstorms. Children could seriously injure  
themselves as the free end of the cable may  
still be live if only the connector is removed  
from the MAINS socket at the back of the  
unit.  
Power Supply  
Whenever convenient, use the power supply  
cord if you want to conserve battery life.  
Make sure you remove the plug from the set  
and wall outlet before inserting batteries.  
Batteries (not included)  
The type plate is located on the bottom  
of the set.  
1
2
Open the battery door and insert 6 batteries,  
type R-14, UM-2 or C-cells, (preferably  
Helpful hints:  
To avoid unnecessary energy consumption,  
always adjust the Source selector to OFF  
after using the set.  
alkaline) with the correct polarity as indicated by  
the "+" and "" symbols inside the compartment.  
Replace the battery door, making sure the  
batteries are firmly and correctly in place.The  
set is now ready to operate.  
General operation  
Batteries contain chemical substances, so  
they should be disposed of properly.  
Switching on and off and selecting the  
function  
To select your sound source, adjust the  
Source selector to: CD, FM or MW.  
Incorrect use of batteries can cause electrolyte  
leakage and will corrode the compartment or  
cause the batteries to burst:  
Do not mix battery types: e.g. alkaline with  
carbon zinc. Only use batteries of the same type  
for the set.  
1
2
3
To switch off the set, adjust the Source  
selector to OFF position.  
To switch to LINE IN mode, connect an  
external audio source to the LINE-IN inlet.  
When inserting new batteries, do not try to mix  
old batteries with the new ones.  
Remove the batteries if the set is not to be used  
for a long time.  
Helpful hints:  
The set switches to LINE IN mode  
Using AC power  
automatically when an external audio source  
is connected, no matter the set is in CD, FM  
or MW mode.  
WARNING:Always check you have  
completely switched off the set, before  
you change or disconnect power supply.  
The LINE-IN inlet is not for earphones.  
1
2
Check if the power voltage, as shown on  
the type plate located on the bottom  
of the set, corresponds to your local power  
supply. If it does not, consult your dealer or  
service center.  
Adjusting volume and sound  
Adjust the sound with the VOLUME and  
DBB controls.  
Connect the power cord to the AC  
MAINS~ inlet and the wall socket.The set is  
now connected and ready for use.  
3
4
To switch the set off completely, withdraw the  
power cord from the wall socket.  
Install the unit near the AC outlet and where  
the AC power plug can be easily reached.  
Disconnect the power cord from the wall  
socket to protect your set during heavy  
 
Tuner  
MP3-CD/CD Player  
Radio reception  
Playing a disc  
1
2
Adjust the Source selector to FM or  
MW.  
This CD player plays Audio Discs including  
CD-Recordables (CD-R), CD-Rewritables  
(CD-RW) and MP3 CD.  
Turn TUNING to tune to a station.  
CD-ROM, CD-I, CDV,VCD, DVD or  
computer CDs are not possible for playback.  
Helpful hints:  
To improve radio reception  
IMPORTANT!  
CDs encoded with copyright protection  
technologies by some record companies may  
be unplayable by this product.  
For FM, extend, incline and turn the  
telescopic antenna for best reception. Reduce  
its length if the signal is too strong.  
1
2
Adjust the Source selector to CD.  
For MW, the set uses a built-in antenna.  
Direct this antenna for best reception by  
turning the whole set.  
Open the CD door, and insert a CD with  
the printed side facing up, then press the CD  
door gently to close.  
Display shows ---, and later the total  
number of tracks. (See 3)  
About MP3  
The music compression technology MP3  
(MPEG1 Audio Layer 3) significantly reduce  
the digital data of an audio CD while  
maintaining CD quality sound.  
3
4
Press 2; to start playback.  
To pause playback, press 2;  
.
Display: 2 flashes. (See 4)  
Getting MP3 files: you can either download  
legal music files from the internet to your  
computer hard disc, or create such files by  
converting audio CD files in your computer  
through appropriate encoder software.  
(128kbps bit rate or higher is recommended  
for MP3 files.)  
5
6
To resume, press 2; again.  
To stop CD playback, press  
9.  
Helpful hints:  
CD play will also stop when:  
you open the CD door;  
you select FM MW or OFF sound source;  
the CD has reached the end.  
Creating a MP3 CD: burn the music files  
from your computer hard disc on a CDR or  
CDRW using your CD burner.  
,
Helpful Hints:  
Make sure that the file names of the MP3 files  
end with .mp3 .  
Total number of music files and albums: around  
400 (with a typical file name length of 20  
characters)  
The length of file names affects the number of  
tracks for playback.With shorter file names, more  
files can be burned on a disc.  
 
MP3-CD/CD Player  
Helpful hints :  
Selecting a different track  
When playback of your program comes  
to the stop position, your set will return  
to normal playback.To re-enter program  
mode, press PROG in the stop position.  
Press / § once or repeatedly until the  
desired track number appears in the display.  
For MP3-CD: First press 43 once or more  
to find your album.  
In the pause/stop position, press 2; to start  
playback.  
Reviewing the program  
In the stop position, press PROG repeatedly  
to see your stored tracks.  
Finding a passage within a  
track  
Erasing a program  
1
2
During playback, press and hold or § .  
The CD is played at high speed and with  
reduced volume.  
When you recognize the passage you want,  
release or § to resume normal playback.  
You can erase the contents of the memory  
by:  
– in the stop position, press PROG to enter  
program mode, and then press 9.  
– selecting FM  
,
MW or OFF;  
Helpful hints:  
– opening the CD door;  
When your searching reaches the end of the  
last track, the CD goes to stop mode.  
Programming track  
numbers  
You may store up to 20 tracks in the desired  
sequence. If you like, store any track more  
than once.  
1
2
In the stop position, press PROG to  
activate programming.  
Display: PROG and P01 flash. (See 5)  
Press  
or  
§
to select your desired track  
number.  
For MP3-CD: first press 43 once or more  
to find your album.  
3
4
Press PROG to store the desired track  
number.  
Display: PROG and P02 flash for you  
to program the next track.  
Repeat steps 2 to 3 to select and store all  
desired tracks in this way.  
If you attempt to store more than 20  
tracks, no track can be selected and the  
display shows ---.  
5
To play your program, press  
2/;.  
 
MP3-CD/CD Player  
Different play modes:  
REPEAT. and SHUFFLE  
(See 6, 7)  
You can select and change the various play  
modes before or during playback, and  
combine REPEAT modes with PROG (PRO-  
GRAM).  
plays the current track continuously.  
repeats the entire CD/program.  
For MP3:  
ALB plays all tracks of current album  
repeatedly.  
– plays all tracks in random order.  
1
To select play mode, press MODE once or  
more.  
The display shows the related icon.  
Press 2; to start playback if in the stop/pause  
position.  
To return to normal playback, press MODE  
repeatedly until the modes are no longer  
displayed.  
2
3
You can also press 9 to cancel your play  
mode.  
 
Maintenance & Safety (See 8)  
CD player and CD handling  
Safety information  
If the CD player cannot read CDs correctly,  
use a cleaning CD to clean the lens before  
taking the set to repair.  
Place the set on a flat, hard and stable surface  
so that the system does not tilt.  
Where the MAINS plug or an appliance cou-  
pler is used as the disconnect device, the dis-  
connect device shall remain readily operable.  
The lens of the CD player should never be  
touched!  
Sudden changes in the surrounding  
Do not expose the set, batteries, CDs to  
humidity, rain, sand or excessive heat caused  
by heating equipment or direct sunlight.  
temperature can cause condensation on the  
lens of your CD player. Playing a CD is then  
not possible. Do not attempt to clean the  
lens but leave the set in a warm environment  
until the moisture evaporates.  
The apparatus shall not be exposed to drip-  
ping or splashing.  
Adequate ventilation with a minimum gap of  
15cm (6 inches) between the ventilation  
holes and surrounding surfaces is necessary  
to prevent heat build-up.  
Always close the CD door to avoid dust on  
the lens.  
To clean the CD, wipe in a straight line from  
the center towards the edge using a soft,  
lint-free cloth. Do not use cleaning agents as  
they may damage the disc.  
Do not cover the ventilation openings with  
items such as newspapers, table-cloths, cur-  
tains, etc.  
Never write on a CD or attach any stickers  
to it.  
No objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
No naked flame sources, such as lighted can-  
dles, should be placed on the apparatus.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
To clean the set, use a dry cloth. Do not use  
any cleaning agents containing alcohol, ammo-  
nia, benzene or abrasives as these may harm  
the housing.  
 
Troubleshooting  
If a fault occurs, first check the points listed below before taking the set for repair.  
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.  
WARNING:  
Do not open the set as there is a risk of electric shock. Under no  
circumstances should you try to repair the set yourself, as this will  
invalidate the guarantee.  
Problem  
Note:  
Make sure the CD is not encoded with copy-  
right protection technologies, as some do not  
conform to the Compact Disc standard.  
Possible cause  
• Remedy  
No sound /power  
The CD skips tracks  
Volume not adjusted  
CD damaged or dirty  
• Adjust theVOLUME  
• Replace or clean CD  
Power cord not securely connected  
• Connect the AC power cord properly  
Batteries dead/ incorrectly inserted  
• Insert (fresh) batteries correctly  
CD contains non-audio files  
Program/shuffle is active  
• Quit program/shuffle mode  
Note: A CD badly scratch or dirty may result in  
improper operation.  
• Press , § once or more to skip to a CD audio  
track, instead of the data file.  
Sound skips during MP3 playback  
MP3 file made at compression level exceeding  
320kbps  
Display does not function properly / No  
reaction to operation of any of the  
controls  
Use a lower compression level to record CD  
tracks into MP3 format  
Disc damaged or dirty  
Replace or clean disc  
Electrostatic discharge  
• Switch off and unplug the set. Reconnect after a  
few seconds  
---, Er or no indication  
No CD inserted  
Insert a CD  
CD badly scratched or dirty  
Replace/ clean CD, see Maintenance  
Laser lens steamed up  
• Wait until lens has cleared  
CD-R/CD-RW is blank or not finalized  
Use a finalized CD-R/CD-RW or suitable CD  
Audio disc only  
 
Environmental information  
All unnecessary packaging material has been omitted.The packaging can be easily separated  
into three materials: cardboard, polystyrene and plastic.  
Your set consists of materials which can be recycled if disassembled by a  
specialized company. Please observe the local regulations regarding the  
disposal of packaging, dead batteries and old equipment.  
 
 
Meet Philips at the Internet  
W
AZ302S  
CLASS 1  
LASER PRODUCT  
Printed in China  
PDCC-LL-0741  
 

Peerless Industries Projector Accessories PRS UNV User Manual
Philips CD Player CDR 600 User Manual
Philips Computer Drive AZ 8070 User Manual
Philips Computer Monitor 107P107P User Manual
Philips DVD Player BDP5012 User Manual
Philips DVR HTR5204 User Manual
Philips TV Cables SWV6372 10 User Manual
Philips Universal Remote SRU5040 User Manual
Polaris Offroad Vehicle 525 IRS User Manual
Prima Stereo System WS 1424 E User Manual