Phase Technology Speaker HP690i User Manual

Open Ceiling Speaker  
HP690i  
Preliminary Technical Information for System Engineers  
Preliminary Technical Information  
The information in this document reflects  
preliminary data. Items including polar  
plots, frequency, phase and impedance  
response graphs will be added when final  
data are available.  
Key Features  
• BroadBeamHP® waveguide technology  
delivers a consistent dispersion pattern  
for maximum coverage area per speaker  
(up to 10 kHz, EASEdocumented).  
Mounting hardware included  
Specifications: HP690i  
System Type  
6.5Coax,compressiontweeterw/1exit,open-ceiling,ported(66  
Watttransformerfor25/70.7/100Voltorvoicecoil/8Ohmdirect)  
Frequency Response (- 3 dB)1  
Low Frequency (-10 dB)1  
Max. Program Power  
Max. Continuous Power RMS2  
Max. SPL dB @ 1 M  
Sensitivity dB @ 1W/1M3  
Impedance (nominal)  
Coverage Angle (-6 dB @ 2 kHz)  
Coverage Angle (-6 dB @ 8 kHz)  
Directivity Factor (Q)  
78 Hz - 22 kHz  
62 Hz - 22 kHz  
200 Watts  
100 Watts  
112.5 dB  
92.5 dB  
8 Ohm  
120º  
• One 165 mm (6.5 in) treated fiber driver and  
one compression driver with a 25.4 mm  
(1 in) exit mounted to a proprietary cast-  
aluminum M6baffle and heat sink.  
• 66 Watt transformer and high output  
(112.5 dB) for the sound reinforcement  
and PA markets.  
150º  
• Easy-access 6-position selectable tap  
switch for 25, 70.7, and 100 Volt applica-  
tions with voice coil/8 Ohm direct sim-  
plifies ordering and inventory tracking.  
4.28 (Averaged 100 Hz - 10 kHz); 5.25 @ 2 kHz  
5.44 dB (Averaged 100 Hz - 10 kHz); 7.2 dB @ 2 kHz  
6-Position rotary switch with voice coil direct (8 Ohm)  
Directivity Index (DI)  
Tap Selector  
Transformer Taps  
• Weatherized components for indoor/  
outdoor applications  
70.7 V Output  
66 W 111 dB  
35 W 108.5 dB  
19 W 106 dB  
10 W 103 dB  
5 W 100 dB  
100 V Output  
66 W 111 dB  
35 W 108.5 dB  
19 W 106 dB  
10 W 103 dB  
25 V Output  
5 W 100 dB  
2.5 W 97 dB  
1.25 W 94 dB  
0.75 W 92 dB  
• 92.5 dB average sensitivity offers high-  
output capabilities and reduced amplifi-  
cation costs.  
• Includes hanging hardware with aircraft  
cables and integrated SpeedClamp™ self-  
locking wire grip for fast, easy & secure  
installation. Also includes Euroblock con-  
nector & terminal weather boot.  
Transducers  
Low Frequency Driver  
High Frequency Driver  
Low Frequency Voice Coil  
Crossover Frequency  
1 x 165 mm (6.5 in) Treated fiber cone, cloth surround  
1 Compression driver with waveguide and 25.4 mm (1 in) exit  
34 mm (1.36 in)  
3 kHz  
• Optional accessory: surface-mount  
bracket (AC-RS-SM6).  
Network Type  
Low Pass  
High Pass  
Enclosure Material  
Motor Board  
Grille  
Inputs  
Colors  
Height  
Diameter  
18 dB per octave, 3rd order  
18 dB per octave, 3rd order  
Injection molded ABS, glass fiber reinforced  
Cast aluminum  
Iridite-plated steel with powder-coat finish  
4 Pin, 5 mm Euroblock for individual or daisy chain connection  
Black or white  
363.6 mm / 14.31 in  
307.3 mm / 12.10 in  
7.3 kg / 16.2 lbs  
N/A  
• High quality black or white paint finish.  
Description  
The HP690i is a premium 6.5” 2-  
way, ported high-efficiency, high-SPL  
loudspeaker for distributed or 8 Ohm  
applications. The HP690i incorporates a  
dedicated 6.5” treated fiber driver and  
high-power compression transducer with  
a BroadBeamHP® waveguide to deliver a  
consistent dispersion pattern and superb  
intelligibility for the foreground music,  
sound reinforcement and PA markets.  
The HP690i incorporates a 66 Watt trans-  
former with a 6-position tap switch and  
voice coil/8 Ohm direct position. Hang-  
ing hardware is included and features  
a fast-action SpeedClampfor easy and  
secure installation.  
Weight  
Shipping Weight  
Accessories  
Included  
Hanging hardware, Euroblock connector & terminal  
weather boot  
Surface-Mount Bracket (AC-RS-SM6)  
1 per box  
Optional  
Packaging  
1
2
3
Frequency response is measured in full space.  
Continuous power rating, EIA-426-B test.  
2.83 Volts at a distance of 1 meter.  
Applications  
SoundTube continually develops new product innovations and improvements. Updates to existing  
products without prior notice are an example of SoundTube’s drive for constant improvement.  
Engineered for installations requiring full-  
range background/foreground music plus  
© 2006 SoundTube Entertainment. All rights reserved. PN TS-HP590 REV 04.04.06  
 
Open Ceiling Speaker  
HP690i  
Preliminary Technical Information for System Engineers  
equalization). Measured sensitivity (2.83 Volt  
input, 1 meter) shall be at least 92.5 dB. The  
speaker shall have a nominal impedance  
of 8 Ohms and be available for 25/70.7/100  
Volt modes with a voice coil/8 Ohm direct.  
The frequency-dividing network shall have  
a crossover frequency of 3 kHz with a slope  
of 18 dB per octave (3rd order). Rated power  
capacity shall be at least 100 Watts continu-  
ous power (RMS), and shall conform to  
EIA-426-B testing. Maximum continuous  
output at 1 meter shall be 112.5 dB.  
SoundTube’s Technical Measurement  
Center (TMC) are analyzed using a  
variety of standard measurement tech-  
niques, including Measured Length  
Sequence (MLS) and Time Delay Spec-  
trometry (TDS). Performance, develop-  
ment and data acquisition tools include:  
Gold Line TEF 20, CLIO, LMS, LEAP, and  
proprietary modeling software. EASE™  
data are acquired through an automated  
TEF 20/Outline/EASEinterface.  
Patented SoundTube  
Technologies  
SoundTube entertainment is consis-  
tently developing new technologies that  
enhance audio product performance.  
SoundTube Entertainment innovations  
are protected by multiple U.S. and  
international patents, which explicitly  
cover SoundTube dome, enclosure  
mounting and dispersion technolo-  
gies. SoundTube Entertainment actively  
defends its patents in order to protect  
SoundTube resellers and end-users.  
EASE™ Data – 3-D polar plots.  
The low-frequency transducer shall have  
a treated fiber cone and cloth surround.  
SoundTubeSPEC™ – Proprietary  
SoundTube speaker placement software.  
Installation for the HP690i shall be by 10’  
aircraft cable affixed to the speaker chassis  
hook. For seismic and safety redundancy,  
a secondary aircraft cable shall be included  
and shall attach to the speaker chassis via  
hook and cable system. The external wiring  
shall be a 4-pin 5 mm Euroblock connector  
for 8 Ohm or distributed systems and shall  
accept from 10 – 22 gauge wire. The system  
shall be for indoor and outdoor applications  
and have a weather-resistant terminal boot  
covering all wire connections.  
Technical Data and  
Specification Tools  
Architectural Specifications  
The loudspeaker shall consist of a 165  
mm (6.5 in) low-frequency transducer  
and a high frequency transducer with a  
1” exit and a frequency-dividing network  
installed in a ported enclosure. The low-  
frequency voice coil diameter shall be 34  
mm (1.36 in).  
Technical Data  
SoundTube Entertainment strives to  
provide complete and effective technical  
information and data to dealers,  
engineers and designers. All data are  
available from SoundTube Entertain-  
The performance specifications of a  
typical production unit shall be as follows:  
Useable frequency response shall extend  
from 62 Hz – 22 kHz (-10 dB, no external  
Data Acquisition  
The enclosure shall be constructed of  
injection-molded, glass reinforced ABS. The  
All performance data acquired at  
Polar Plots  
N/A  
Technical data, EASE plots, SoundTubeSPEC software & product downloads available at www.soundtube.com  
 
Open Ceiling Speaker  
HP690i  
Preliminary Technical Information for System Engineers  
grille shall be constructed of iridite-plated,  
powder-coated steel for lasting perfor-  
mance in the elements. Overall cabinet  
dimensions shall be no more than 363.6  
mm (14.31 in) in height by 307.3 mm (12.10  
in) in diameter and weigh no more than  
7.3 kG (16.2 lbs).  
Mechanical Drawings  
The HP690i shall ship with hanging  
hardware, Euroblock connector and ter-  
minal weather boot. Optional accessories  
for the HP690i include surface-mount  
bracket (AC-RS-SM6), 20’ hanging cable  
(AC-RS-HH-20) and 10’ split loom tubing  
(AC-SLT-10) for architectural applications.  
363.6 mm (14.31 in)  
The system shall be the HP690i with  
hanging hardware for both low- and high-  
impedance applications.  
SoundTube Entertainment  
307.3 mm (12.10 in)  
6430 North Business Park Loop  
Park City, Utah 84098  
Phone 435.647.9555  
Included Accessories  
Fax  
435.647.9666  
Toll Free 800.647.TUBE  
Hanging Hardware: Main & Safety  
Cables w/ SpeedClamp™  
SoundTube’s hanging cable kit incorpo-  
rates hanging & safety cables & fasten-  
ers for an integrated and easy-to-install  
system. Hanging & safety cables are  
infinitely adjustable to 2.74 M (9.0 ft).  
Optional Accessory  
463.80 mm (18.26 in)  
346.45 mm  
(13.64 in)  
Surface-Mount Bracket (AC-RS-SM6)  
SoundTube Entertainment manufactures a complete line of speakers for:  
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing  
All SoundTube products are designed and engineered in the USA.  
 

Peerless Industries Projector EXA User Manual
Pentax Digital Camera OptioWP User Manual
Philips Indoor Furnishings SB7G17B User Manual
Philips Light Therapy Device HF3304 User Manual
Philips Refrigerator 42PF5320 79 User Manual
Pitco Frialator Fryer 14T User Manual
Plantronics Headphones CS530 User Manual
Plantronics Headphones PRO HD User Manual
Polk Audio Speaker RM4300 User Manual
Proxima ASA Projector PROAV9410L User Manual