Install Instructions For:
1.435.647.9555
|
800.647.TUBE
|
FP Series
Motion Sensor
ATTENTION
Motion Sensor Accessory Contents
1 FP Pod with wide lens
1 Narrow lens
The FP pod comes with the motion sensor lens preset to a wide angle and will trigger audio
activation from movement beyond the diameter of the dome. For applications with a narrow motion
sensor angle, follow these instructions. The narrow motion sensor lens will trigger audio activation
only when someone is standing directly underneath the dome.
DomeClamp
FPSpeakerPod
MotionSensor
MotionSensor
lens(narrow)
(Optional,included)
(Standard)
MotionSensor
lens(wide)
MotionSensor
PodCover
©2005SoundTubeEntertainment,Inc. Allrightsreserved. PN INS-FP6-MSREV01.12.06
Warning
Warning
SoundTube speakers must be installed by a professional audio
installer/contractor. For safety and for optimum audio performance,
installer must follow all directions issued by SoundTube Entertainment.
Do not spec or install speaker near support beam, ventilation
duct or other structure that may interfere with speaker function
or dispersion.
Install Instructions For:
SoundTube/Gilderfluke SD-25
1.435.647.9555
|
800.647.TUBE
|
FP Series
FP6030-M FP6020-M Wiring diagram
12 VDC
Power
supply
Line out
right
Line out
Left
Power
9-24 VDC
SD-25 Audio Repeater
Gilderfluke & Company
Burbank, califorina
Speakers
Power Running
status
Inputs
Left
Right
9-24 vdc
B
A
Jumper wire
Pin 5 to 10
Blue
Cat V
Orange
White Orange
Cat V Pair
(Signal)
Black Spk
Red Spk
Notes
Brown
White Brown
Cat V Pair
Green Spk
White spk
1- 12 VDC is the maximum power
input from the power supply if using
soundtube motion sensor
2- If more volume is needed the SD-25
can be bridged and run in mono
mode. Internal jumpers need to be
set for this mode. Please see Sd-25
configuration & installation
instructions.
3- For operating and playback modes
please see SD-25 installation sheet.
|