camera solutions
PRODUCT SPECIFICATION
IMS0 Sarix® IP Mini Indoor Fixed Dome
0.5 MEGAPIXEL STANDARD DEFINITION INTEGRATED CAMERA
Product Features
• Up to 0.5 Megapixel Resolution (800 x 600)
• Up to 30 Images per Second (ips) at All Resolutions
• Compact Size with 3-inch Bubble
• Varifocal 2.8 ~ 10 mm Lens
• Easy Installation
• H.264, MPEG-4 and MJPEG Compression
• Sensitivity Down to 0.12 lux
• Power over Ethernet (PoE), IEEE 802.3af
• Video Setup Jack Accessible with Dome Installed
• Up to 2 Simultaneous Video Streams
• Electronic PTZ Through the Web Browser
• Open IP Standards
The Sarix® IMS0 Series is a standard definition network indoor
fixed dome camera designed with industry-leading image quality and
high performance processing power. From back box wiring to
focusing the lens, the IMS0 is designed to install quickly and easily.
Web Interface
The IMS0 uses a standard Web browser for powerful remote setup
and administration.
Window Blanking
Sarix technology defines the next generation of video security
imaging performance, delivering high resolution, advanced low-light
capabilities, consistent color science, and fast processing power.
The H.264 compression video files are considerably smaller, making
network video storage more affordable.
Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. The IMS0 supports up to four
blanked windows. A blanked area will appear on the screen as a
solid gray window.
Video Systemization
Fixed Dome Camera
The IMS0 easily connects to Pelco IP and hybrid systems such as
Endura® version 2.0 (or later) and Digital Sentry® version 4.3 (or
later). The camera is also compatible with Digital Sentry NVs
(DS NVs), a full-featured video management software, which is
four free Pelco IP licenses and allows for the management of video
from up to 64 cameras.
The IMS0 contains an integrated varifocal 2.8 ~ 10 mm lens. All
models include a camera in a compact indoor enclosure that is ready
to install.
The IMS0 supports two simultaneous video streams. The two
streams can be compressed in MJPEG, MPEG4, and H.264 formats
across several resolution configurations. The streams can be
configured in a variety of frame rates, bit rates, and group of pictures
(GOP) structures for additional bandwidth administration.
The IMS0 Series features open architecture connectivity to
third-party software. Pelco offers an application programming
interface (API) for interfacing with Pelco’s network cameras.
Built-In Analytics
The Pelco Camera Sabotage behavior is a standard feature of the
IMS0. This behavior detects contrast changes in the field of view. An
alarm is triggered if the lens is obstructed with spray paint, a cloth,
or covered with a lens cap. Any unauthorized repositioning of the
camera also triggers an alarm.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2973 / REVISED 7-8-11
TECHNICAL SPECIFICATIONS
VIDEO
Video Encoding
H.264 Base profile, MPEG-4, and MJPEG
Video Streams
Up to 2 simultaneous streams; the second
stream is variable based on the setup of the
primary stream
Frame Rate
Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5,
4, 3, 2, 1 (dependent upon coding, resolution,
and stream configuration)
Available Resolutions
Resolution
MJPEG
H.264 Base Profile
MPEG-4
Aspect Maximum Recommended Maximum Recommended Maximum Recommended
MPx Width Height
Ratio
4:3
IPS
Bit Rate
5.8 Mbps
3.7 Mbps
0.9 Mbps
IPS
Bit Rate
2.0 Mbps
1.6 Mbps
0.4 Mbps
IPS
Bit Rate
N/A
0.5
0.3
0.1
800
640
320
600
480
240
30 ips
30 ips
30 ips
25 ips
30 ips
30 ips
N/A
4:3
30 ips
30 ips
1.7 Mbps
0.4 Mbps
4:3
Additional Resolutions
Supported Protocols
640 x 512, 640 x 352, 480 x 368, 480 x 272,
320 x 256, 320 x 176, 4CIF (704 x 489 and
704 x 576), and CIF (352 x 240 and 352 x 288)
TCP/IP, UDP/IP (Unicast, Multicast IGMP),
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4,
SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP
(client), SSH, SSL, SMTP, FTP, and
802.1x (EAP)
Users
Unicast
Up to 20 simultaneous users depending on
resolution settings (2 guaranteed streams)
Multicast
Security Access
Unlimited users H.264
Password protected
Software Interface
Pelco System Integration
Web browser view and setup
Endura 2.0 (or later) or
Digital Sentry 4.3 (or later)
Open IP Integration
Pelco IP camera API
Minimum System Requirements
Processor
Intel® Pentium® 4 microprocessor, 1.6 GHz
Operating System
Microsoft® Windows® XP, Windows Vista®,
or Mac® OS X 10.4 (or later)
Memory
512 MB RAM
Network Interface Card
Monitor
100 megabits, minimum
Minimum of 1024 x 768 resolution, 16- or
32-bit pixel color resolution
Web Browser*
Internet Explorer® 7.0 (or later) or Mozilla®
Firefox® 3.5 (or later); Internet Explorer® 8.0
(or later) is recommended for configuring
analytics
Media Player†
Pelco Media Player or QuickTime® 7.6.5 for
Windows XP, Windows Vista, or QuickTime
7.6.4 for Mac OS X 10.4
*Internet Explorer is not supported by Mac OS X 10.4.
†This product is not compatible with QuickTime version 7.6.4 for Windows XP
or Windows Vista. If you have this version installed on your PC, you will
need to upgrade to QuickTime version 7.6.5.
LENS
Aspect Ratio
Field of View
in Degrees
16:9
4:3
76
56
21
16
5:4
73
58
20
16
Horizontal
91
2.8 mm
Vertical
Horizontal
Vertical
50
25
10.0 mm
14
TECHNICAL SPECIFICATIONS
MODEL
IMS0C10-1
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
Sarix mini indoor fixed dome network camera,
0.5 MPx, color, 2.8 ~ 10 mm varifocal lens,
white trim ring, clear dome
PENDANT
(Mount Available as Accessory)
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• C-Tick
12.65
(4.98)
• Patents Pending
OPTIONAL ACCESSORIES
IM-PMWT
IM-WMWT
LDIM-0
White pendant mount
White integrated wall mount
White lower dome with smoked bubble
12.37
(4.87)
IX-SC
Service/monitor cable, 1.22 cm (4 ft);
compatible with standard BNC connectors
AUD-1
ALM-1
POE20U560G
External audio accessory
External alarm accessory
Single port PoE injector
Ø 8.18
(3.22)
INTEGRATED WALL MOUNT
(Available as Accessory)
12.80
(5.04)
13.92
(5.98)
12.73
(5.01)
Ø 8.18
(3.22)
7.62
(3.00)
Pelco by Schneider Electric
Pelco, the Pelco logo, and other trademarks associated with Pelco products
referred to in this publication are trademarks of Pelco, Inc. or its affiliates. All
other product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2011, Pelco, Inc. All rights reserved.
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
|