ICS3COND-MKIT
Marine Kit
C2210M (12/04)
®
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Only use attachments/accessories specified by the manufacturer.
6. Installation should be done only by qualified personnel and conform to all local codes.
7. This product is not suitable for splash zone installations. Only use stainless steel marine-rated
enclosures and pan and tilts for splash zone installations.
DESCRIPTION
The ICS3COND-MKIT marine kit is designed to protect the ICS300 Camclosure® and the
ICS300-COND adapter from galvanic corrosion by electrically isolating the unit from the mounting
structure. When installed correctly the marine kit eliminates the conductive path between the
aluminum adapter and the dissimilar metal of the mounting structure.
The ICS3COND-MKIT includes the following parts:
Qty
1
Description
Gasket
1
1
3/4-inch NPT liquid type fitting
#7 drill bit
2
Nylon hex screws
2
4
1
6-32 x 1 1/4-inch, Monel, button head screws
10-24 x 3/8-inch, Monel, Phillips, flat head screws
1/4-20 spiral point tap
IMPORTANT:
•
Galvanic corrosion is a process that is common in a marine environment. It requires
marine installation techniques to protect the installation. If you are unfamiliar with such
installation techniques, you should consult a marine installation expert.
•
•
Pelco cannot accept any responsibility for incorrect installations that result in galvanic
corrosion damage to the unit.
This product must be installed correctly to provide protection against galvanic corrosion.
Failure to follow these installation instructions will void the warranty.
|