C1664M-B (1/06)
TW3001P Passive Single-Channel
Video Transceiver
®
The TW3001P video transceiver is a passive (no power required) single-channel balun that sends full motion video
(color/black-white) and Coaxitron® PTZ control signals over a single unshielded twisted pair (UTP) cable.
Two TW3001Ps or one TW3001P with a transceiver or active receiver are required for transmission over a single
UTP cable. The TW3001P is compatible with all Pelco twisted pair equipped cameras, enclosures, and domes.
Cable Type
Cat3
Cat5
Cat5e
Cat6
Distance (with Coaxitron)
Distance (video only)
300 ft
500 ft
750 ft
750 ft
400 ft
650 ft
750 ft
750 ft
NOTE: Cat5e cable is recommended for optimum video performance.
10 PINS (5-/6+)
8 PINS (4-/5+)
PIN 5 +
PIN 4 -
MONITOR
FIXED CAMERA
TW3001P
VIDEO
UTP
DIRECT
CONNECTION
NOTE: A TW3001P CAN BE CONNECTED DIRECTLY INTO CAMERAS THAT DO NOT HAVE AN RJ-45 CONNECTOR.
UTP CAMERAS HAVE A10-PIN RJ-45 CONNECTOR. STANDARD RJ-45 CONNECTORS HAVE 8 PINS.
BLUE WIRE =
MONITOR
GRAY WIRE =
CAMCLOSURE
TW3001P
VIDEO
UTP
DIRECT
CONNECTION
VC-UTP BOARD
SPECTRA
MATRIX
TW3001P
VIDEO
UTP
COAXITRON
DIRECT
CONNECTION
+
-
+
-
MONITOR
Figure 1. TW3001P Basic Applications
Wire Gauge (maximum allowable)
16 AWG (1.5 mm2)
18 AWG (1.0 mm2)
Single Wire (solid)
Stranded Wire (flexible)
|