Installation and Assembly - Universal lockdown brackets for
Plasma and LCD Desktop Stands
Model: FLD-UNV (-S)
Read instruction sheet before you start installation and assembly.
Before you start check the parts list to insure all of the parts shown are included.
FLD-UNV FLD-UNV-S
Parts List
A
D
B
C
G
Description
Qty Part #
Part #
A front lockdown bracket
B back lockdown bracket
C 10-16 x 3/4 penta pin screw
D M5 x 1" penta pin tool driver
E #8 x .5 phillips screw
F #14 nylon cap cover
G washer
2
2
124-1063 124-4063
124-1062 124-4062
520-9258 520-9281
520-9249 520-9249
500-1011 500-1011
560-1158 590-4190
540-9400 540-9400
500-1003 500-1003
2
1
F
4
E
2
H
12
4
Note: Some parts may appear slightly different than illustrated.
H #8 x 3/4" phillips screw
Position TV stand to proper location and mark front
of the stand on the desktop.
Remove screws that hold screen to the stand as
shown below.
NOTE: Stand may appear different then illustrated.
BACK OF SCREEN
TV STAND
FRONT
TOP VIEW
Flip TV stand upside down and measure from the
front of the stand to the center of the screw as
shown in detail 1 to get dimension x. Add 1.035"
to get the mounting location of the front lockdown
bracket (A).
DETAIL 1
x
FRONT OF TV STAND
FRONT OF TV STAND
BOTTOM VIEW
ISSUED: 07-05-05 SHEET #: 124-9422-2 05-07-08
1 of 3
For customer service call 1-800-729-0307 or 708-865-8870.
NOTE: Back lockdown bracket (B) may be placed with flange facing up to allow the screen to be positioned further forward
as shown below.
BACK EDGE OF DESK
Attach back lockdown brackets (B) to desktop using penta pin screws (C) at either location 1 or 2. Tighten
securely with penta pin driver (D).
Note: Use Nylon cap covers (F) with penta pin screws (C) when using hole 1 of back lockdown bracket (B)
as shown in detail 4.
DETAIL 4
C
AND
TV ST
B
F
1
2
B
ISSUED: 07-05-05 SHEET #: 124-9422-2 05-07-08
3 of 3
For customer service call 1-800-729-0307 or 708-865-8870.
|