Model: IMC 18
Installation and Assembly - CRT Ceiling Mount Kit for 14" - 17" Monitors
IMPORTANT! Read entire instruction sheet before you
start installation and assembly.
WARNING
• Installer must verify that the ceiling will safely support
four times the combined weight of all attached equip-
ment and hardware.
IMPORTANT! This kit includes all mounting hardware
for direct attachment to a wood joist ceiling. For
concrete ceiling installations order accessory kit ACC
210. Fixed Length and adjustable extension columns
are also available.
Before you start make sure all of the parts shown below are included with your product.
E
A
H
F
G
I
C
D
B
U
PARTSLIST
PART #
QTY. DESCRIPTION
J
A
B
C
D
E
F
530-9413
540-9440
520-9513
520-9549
540-9406
540-9405
4
4
4
6
8
6
5
2
2
1
1
1
1
1
1
1
2
1
1
1
4
1/4-20 nylock nut
1/4 SAE flat washer
1/4-20 x 3/4" carriage bolt
5/16-18 socket head screw
5/16 SAE flat washer
5/16 lock washer
M5 x .8 x 10 mm phillips screw
5/16-18 x 3/4" hex head bolt
5/16-18 nylock nut
hanging bracket
K
G 520-9250
H
I
520-9210
530-9306
073-1007
073-1008
073-1001
J
K
L
tilt bracket
L
left adjuster
M 073-1002
073-1003
O 073-1004
128-1039
Q 2PT-22CA01D
right adjuster
N
left tray
M
right tray
P
ceiling plate
ceiling plate end cap
flush mount tube
retaining collar
R
S
T
1446-014
1800-375
540-9432
5S1-015-C03
fiber washer
O
U
#14 x 2.5" (6 mm x 65 mm)
wood screw
N
Note: Parts may not appear exactly as illustrated.
R
Q
T
P
S
1 of 5
ISSUED: 2-19-98 SHEET #: 073-9003-1 08-26-04
For customer service call 1-800-729-0307 or 708-865-8870.
WARNING
• Installer must verify that the ceiling will safely support
four times the combined weight of all attached equip-
ment and hardware.
∅ 5/16" (8 mm)
For Concrete Ceilings drill four 5/16" (8 mm)
dia. holes to a minimum depth of 1 3/4" (45
mm). Attach ceiling plate (P) using concrete
expansion anchors as shown (left and next
page). Tighten to 80 in • lb (9 N.M.) maximum
torque.
Q
P
Snap end caps (Q) into place.
concrete
anchor
Q
WARNING
• Tighten concrete anchor bolts firmly, but do not
overtighten. Overtightening can damage the bolts,
greatly reducing their holding power.
FOR PRODUCT SAFETY USE
ONLY...
RAWLTM #5005 OR HILTITM
HL814 CONCRETE ANCHORS
[.312 x 1.625 (8 mm x 41 mm)].
ORDERACCESSORYFAS-
TENER KIT #ACC 210
• Never tighten in excess of 80 in • lb (9 N.M.).
WARNING
• Always attach concrete expansion anchors directly to
load-bearing concrete.
CONCRETE ANCHOR
INSTALLATION
Cross Section: Attachment
to a concrete ceiling.
• Never attach concrete expansion anchors to concrete
covered with plaster, drywall or other finishing material.
ceiling
STEP1: Hammer STEP2: Tighten to 80 in • lb (9
in concrete
anchor.
N.M.) maximum torque to
expand anchors.
CUTAWAYVIEW
3 of 5
ISSUED: 2-19-98 SHEET #: 073-9003-1 08-26-04
For customer service call 1-800-729-0307 or 708-865-8870.
First:Assemble bracket as shown.
Leave all fasteners slightly loose to
allow for adjustment.
Second: From behind, insert
monitor into bracket. Face of
monitor should touch returns on
left and right trays (N & O). Adjust
height and width of bracket to fit
snugly around monitor.
Last: Tighten all fasteners!
A
B
K
monitor
L
M
C
N
E
F
return
D
O
G
return
4 of 5
ISSUED: 2-19-98 SHEET #: 073-9003-1 08-26-04
For customer service call 1-800-729-0307 or 708-865-8870.
First: Choose tilt option (see "Tilt Options"
below).
Second: From inside, insert and tighten 5/16-
18 x 3/4" hex bolts (H) to hanger bracket (J).
Third:Attach hanger bracket using fiber
washer (T) and retaining collar (S). Tighten
retaining collar four or five complete turns.
Last: Align one hole in the side of the retain-
ing collar with slot. From inside insert and
tighten one M5 x .8 x 10 mm phillips screw
(G) to lock retaining collar (S).
R
P
R
J
H
S
H
J
G
T
WARNING
• For safety retaining collar must be locked with screw!
S
Complete the assembly as shown.
J
K
WARNING
H
E
• Be sure to TIGHTENALL FASTENERS SECURELY!
I
E
WARNING
• Always use an assistant or mechanical lifting equip-
ment to safely lift and position the TV or monitor.
F
D
J
J
K
0O to 20O
K
Tilt Option Two
Tilt Option One
Attach tilt bracket (K) to hanging
bracket (J) as shown for a tilt
range from 20O to 40O.
Attach tilt bracket (K) to hanging
bracket (J) as shown for a tilt range
from 0O to 20O.
5 of 5
ISSUED: 2-19-98 SHEET #: 073-9003-1 08-26-04
For customer service call 1-800-729-0307 or 708-865-8870.
©2004PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
|