Paxar Battery Charger Monarch 9462TM User Manual

O P E R AT I N G  
I N S T R U C T I O N S  
The Monarch® 9462™ Single-Station Battery Charger  
charges one 7.4V lithium-ion battery at a time for the  
following printers:  
Sierra Sport2™ 9460™  
Sierra Sport3™ 9433™  
Monarch® Pathfinder® Ultra® Silver 6032™  
Monarch® Pathfinder® Ultra® Gold 6037™  
Monarch® Pathfinder® Ultra® Platinum 6039™  
Note: You must charge a battery before using it.  
WARNINGS  
Use only a Paxar-qualified battery. The battery could  
be damaged or explode if placed on a different  
charger.  
Do not charge non-rechargeable batteries in this  
charger.  
Do not throw the battery in the trash. Dispose  
according to your local regulations.  
TC9462OI Rev. AG 12/07  
©2001 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp.  
All rights reserved.  
 
C h a r g i n g t h e B a t t e r y  
To charge the battery, insert the battery into the charger,  
with the ribbed end sticking out. Charging time can take  
up to three hours. It takes approximately 1 hour to reach  
the 80% level (where it is now usable). To reach 100%, it  
takes approximately 2 hours more.  
Reading the Display  
Power LED – on (solid). Charger is plugged in.  
Charging LED – flashes when you insert the battery;  
on (solid) during charging; off when charging is  
complete.  
Complete LED – flashes when the battery is 80%  
charged; on (solid) when the battery is 100% charged.  
Operating Instructions 3  
 
Troubleshooting  
When an error occurs, the Charging and Complete LEDs  
blink together. In this case, repeat the charging process.  
If the error still occurs, repeat the process with a new  
battery. If there is a still a problem after the second  
repeat charge, call Paxar Service.  
In between charges, remove the battery, wait for the  
lights to stop flashing, then re-insert the battery.  
S p e c i f i c a t i o n s  
Operating Limits:  
Temperature  
32°F to 104°F (0°C to 40°C)  
Humidity  
5% to 90% non-condensing  
Storage Limits:  
Temperature  
-40°F to 158°F (-40°C to 70°C)  
Humidity  
5% to 90% non-condensing  
Charger  
Length:  
3” (76.2 mm)  
Width:  
3.25” (82.55 mm)  
3” (76.2 mm)  
Height:  
Input:  
12 to 16 VDC/14W  
1.16 lbs. (.53 kg)  
Shipping Weight:  
Power Supply  
Input:  
Universal switching power supply, 85 to  
264 VAC, 50/60 Hz.  
Output:  
12 VDC/18W max  
information, and telephone numbers for our locations  
throughout the world.  
Toll Free:  
1-800-543-6650 (In the U.S.A.)  
1-800-363-7525 (In Canada)  
4 Operating Instructions  
 

Pelco Home Security System C2478M B ML User Manual
Pelco Pacemaker C2907M QS User Manual
Pella Door 80JJ0103 User Manual
Philips Baby Monitor 37PFL3403 User Manual
Philips Battery Charger SCE4430 12 User Manual
Philips Breast Pump SCF156 01 User Manual
Philips Digital Photo Frame 7FF1AW 05 User Manual
Polycom Server DOC2562A User Manual
Pontiac Automobile 2000 sunfire User Manual
ProForm Model Vehicle PFTL160100 User Manual