Hotwirer Model 6039 MVL Phone Filter
Installation Instructions
Document Number 6039-A2-GN10-00
August 1999
The Hotwirer Model 6039 MVL Phone Filter separates voice and data signals to
improve data transmission throughput and minimize audible background noise. A
phone is used to represent equipment that plugs into a phone jack and uses the POTS
phone line, such as a phone or fax machine.
" Procedure
To connect a phone filter:
1. Unplug your phone from the wall jack.
2. Plug the fixed cable (LINE end of the filter) into the wall jack.
3. Plug the telephone cable into the PHONE end of the filter.
L I N E
1198
iquè China
abr
Phone Filter
e
r
u
f
t
r
h
e
it
g
Sp
i
c
e
P/N 0802-33
B
e
9
F
2
u
-
s
0
e
0
Inc.
TM
V
I
C
E
TU
O
Y
D
U
C
T
S
E
R
P
R
Made in China
R
/
F
Y
LR92997
ENT
UIPM
CCESSAR
A
EQ
.E. E100296
L.T
PHONE
4-Inch
Fixed Cable
99-16504
Warranty, Sales, Service, and Training Information
Contact your service provider directly for any help needed. For additional information concerning warranty, sales,
service, repair, installation, documentation, training, distributor locations, or Paradyne worldwide office locations,
use one of the following methods:
H
H
Telephone: Call our automated system to receive current information via fax or to speak with a company
representative.
— Within the U.S.A., call 1-800-870-2221
— Outside the U.S.A., call 1-727-530-2340
!
Important Safety Instructions
1. Read and follow all warning notices and instructions marked on the product or included in the manual.
2. This product is intended to be connected to Listed/Certified telephone wiring with a minimum of 24 AWG
(.5 mm) behind a Listed/Certified primary protector.
3. Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous high-voltage points or other risks. Refer all servicing to qualified service personnel.
|