Quantum Series
PD60S & PD60SL
Modem Redundancy Switch
OVERVIEW
FEATURES
ꢀ Modular design gives maximum flexibility
ꢀ Integrated Backup Modem and Redundancy
Controller in 3RU
ꢀ Low Cost
ꢀ Scaleable up to 1 for 16 (Traffic protection
only)
ꢀ Scaleable up to 1 for 8 (Traffic and Overhead
protection)
ꢀ Backup Modem / Controller can be replaced
without affecting traffic
ꢀ Supports priority traffic channel protection
ꢀ Supports mixed traffic interfaces including
Ethernet
The Quantum Modem Redundancy Switch
system offers a revolutionary approach to
Modem Redundancy Protection by integrating
the Backup Modem and 1:N Redundancy
Controller into a single unit. The Backup
Modem / Controller becomes a 3RU high 19
inch chassis, which incorporates the traffic and
overhead interface connectors necessary to
support the online Modem group. This low cost
and compact 1:N scheme employs proven
integrated 1:1 Redundancy technology
pioneered by Paradise Datacom.
ꢀ Supports Manual and Automatic Redundancy
Protection
EASE OF OPERATION
ꢀ Redundant power supplies for maximum
reliability
ꢀ Web User Interfaces Remote Control via
Ethernet - simple to configure
An innovative new menu structure makes
configuration a simple procedure. Advanced
user interfaces support the display of text in
different languages. Unique Web User Interface
offers full remote control and in-depth
performance analysis tools using Internet
Explorer without special Monitor & control
software.
ꢀ PD60S Supports an IF Modem group with PD20
and/or PD60 Modems and optional Transponder
Switching
ꢀ PD60SL supports an L-band Modem group with
PD20L and/or PD60L Modems
Paradise Datacom LLC
Paradise Datacom Ltd.
328 Innovation Blvd.
1 Wheaton Road, Witham
State College, PA 16803 USA
Tel: 1 (814) 238-3450
Fax: 1 (814) 238-3829
Essex CM8 3UJ England
Tel: +44(0) 1376 515636
Fax: +44(0) 1376 533764
1 OF 4
207822 REV A ECO 15932
Quantum Series
PD60S & PD60SL Modem Redundancy Switch
Fully configurable - only pay for what you need!
Possible modes
SCPC DVB-S2
Description
PD60 Base Switch
BPSK/QPSK/OQPSK, 4.8kbps to 10Mbps, 1bps variable rate, closed network modem.
Ethernet 10/100BaseT on RJ45 for M&C, unaccelerated Ethernet 10/100BaseT on RJ45 via traffic or overhead (Ethernet Bridging)
Includes: Viterbi FEC, Rates 1/2, 3/4 & 7/8 with k=7.
Intelsat Reed-Solomon Outer Codec to IESS 308
Advanced ESC: Variable rate Async channel for Closed Net plus ESC operation.
AUPC: Automatic Uplink Power Control (operates through ESC channel)
z
z
Remote Web Browser based monitoring tools (Spectrum Display, Constellation Monitor and link performance versus time) plus SMTP email client for status notification.
DHCP allowing IP address to be allocated dynamically via external DHCP network server
Ethernet header compression of data rates up to 2Mbps
IEEE 802.1p QoS supporting choice of strict priority queuing or fair weighting queuing, IEEE 802.1q VLAN support.
50kbps to 10Mbps, 1bps variable rate in DVB-S2 mode, requires a DVB-S2 option
z
Either IF PD60S
IF Frequency 50-90 MHz & 100-180MHz in 100Hz steps, Closed Network modem, Closed Network plus ESC modem. (hardware option)
z
z
z
z
or
L-band PD60SL
L-band: 950- 1950MHz with 100Hz resolution, includes 4E-8 internal reference (hardware option)
Wideband L-band
Extends L-band coverage to 950-2050MHz in 100Hz steps - L-band option only
Extends base operation to 16,896kbps
z
z
z
z
z
z
z
z
Adds Data Rates to 16,896kbps
Adds Data Rates to 25Mbps
Adds Data Rates to 60Mbps
Extends 16,896kbps operation to 25Mbps - requires 16,896kbps option
Extends 25Mbps operation to 60Mbps - requires 16,896kbps & 25Mbps options
IP Acceleration
TCP/IP Acceleration to 10Mbps on base Ethernet port, subject to prevailing data rate limits - overcomes performance problems associated with TCP over satellite
Ethernet Brouting for Point-to-Multipoint operation when there is a non-satellite return path - can be used with base Ethernet port or IP Traffic card
z
z
z
z
Ethernet Brouting
IP Traffic Shaping
Supports allocation of CIR and BIR plus priority for IP Streams identified by IP Address, Diffserv Class, IEEE 802.1p priority tag or MPLS EXP field. Available as an option on the base IP port
and the IP Traffic card.
z
z
Position 2
(must choose 1 option)
hardware option
z
z
z
z
Blank Panel
IP Traffic card providing TCP acceleration to 16,896kbps, subject to prevailing data rate limits, also provides HTTP Acceleration by prefetching webpage inline objects to reduce webpage
download time
Position 2
IP Traffic card options
Adds TCP acceleration up to 25Mbps on IP Traffic card, subject to prevailing data rate limits - requires IP Traffic card
z
z
z
z
z
z
z
z
Adds TCP acceleration up to 60Mbps on IP Traffic card, subject to prevailing data rate limits - requires IP Traffic card and requires 25Mbps Acceleration option
Adds Robust Header Compression to RFC 3059 (IP/UDP) at throughput rates to 29kpkts/s (1-way), 22kpkts/s (2-way), subject to prevailing data rate limits - requires IP Traffic card
Encapsulation of IP packets and Ethernet frames over DVB uses MPE or ULE protocols
z
Adds Dynamic Routing: supports RIP, OSPF and BGP, plus 64 static routes - requires IP Traffic card
DVB-S2 Modulation & Coding
hardware options
DVB-S2 CCM Tx - includes QPSK, 8PSK & 16APSK for DVB-S2 use only, includes also DVB-S2 LDPC Error Correction for DVB-S2 only. Must specify IP Traffic card if IP Traffic required
Includes SmartLink allowing SCPC features to be overlaid on DVB-S2 space segment.
z
z
DVB-S2 CCM Rx - includes QPSK, 8PSK & 16APSK for DVB-S2 use only includes also DVB-S2 LDPC Error Correction for DVB-S2 only. Must specify IP Traffic card if IP Traffic required
Includes SmartLink allowing SCPC features to be overlaid on DVB-S2 space segment.
Low Rate TPC
Rates 5/16, 21/44, 0.493, 2/3, 3/4, 0.789, 7/8 Paradise (low latency) in BPSK, QPSK, OQPSK
Rate 7/8 in QPSK, OQPSK
Rate 0.93 Paradise in QPSK, OQPSK
Rates 3/4, 7/8, 0.93 Paradise in 8PSK - requires 8PSK option
Rates 3/4, 7/8, 0.93 Paradise in 16QAM - requires 16QAM option
2nd Generation Turbo
10Mbps maximum
subject to prevailing data rate
limits
z
z
High Rate TPC
Rates 5/16, 21/44, 0.493, 2/3, 3/4, 0.789, 7/8 Paradise (low latency) in BPSK, QPSK, OQPSK
Rate 7/8 in QPSK, OQPSK
Rate 0.93 Paradise in QPSK, OQPSK
Rates 3/4, 7/8, 0.93 Paradise in 8PSK - requires 8PSK option
Rates 3/4, 7/8, 0.93 Paradise in 16QAM - requires 16QAM option
2nd Generation Turbo
All data rates to 20Mbps
subject to prevailing data rate
limits
Sequential FEC
Limited to 2,048kbps maximum
z
z
Rates 1/2, 3/4, 7/8 in BPSK, QPSK, OQPSK
FastLink
Low Latency LDPC
FastLink LDPC up to 1Mbps, supports BPSK and QPSK, also supports 8PSK - requires 8PSK option, FastLink 8QAM - requires FastLink 8QAM option, and 16QAM - requires 16QAM option
(hardware option)
FastLink LDPC extension to 2.5Mbps - requires FastLink LDPC to 1Mbps
z
z
z
z
z
FastLink LDPC extension to 5Mbps - requires FastLink LDPC to 1Mbps and extension to 2.5Mbps
FastLink LDPC extension to 10Mbps - requires FastLink LDPC to 1Mbps plus extension to 2.5Mbps and extension to 5Mbps
FastLink LDPC extension to 25Mbps - requires FastLink LDPC to 1Mbps plus extension to 2.5Mbps, extension to 5Mbps and extension to 10Mbps
FastLink LDPC extension to 60Mbps - requires FastLink LDPC to 1Mbps plus extension to 2.5Mbps, extension to 5Mbps, extension to 10Mbps and extension to 25Mbps
Configuration options continue on next page.
3 OF 4
207822 REV A ECO 15932
Quantum Series
PD60S & PD60SL Modem Redundancy Switch
Paired Carrier Operation
PAIRED CARRIER MODEM SCHEMATIC
Paired Carrier
Disabled
Paired Carrier
Enabled
Can save 50%
on space segment
Paired Carrier technology allows both the uplink and
downlink signals to occupy the same space segment.
An adaptive self-interference cancellation technique
removes the uplink signal components generated by
the local terminal from the received signal off satellite,
allowing demodulation of the far end signal.
Paired Carrier
Parameter
QUANTUM Series Switch
Paired Carrier
Transmit and receive carriers are overlaid on top of
each other in the same space segment. Echo
cancellation techniques are used in the demodulator
to cancel the transmit carrier and extract the wanted
receive carrier signal .
Paired Carrier
data rate options
512kbps, 1024kbps, 2.5Mbps, 5Mbps, 10Mbps,
15Mbps, 20Mbps, 25Mbps, 40Mbps, 50Mbps
and 60Mbps traffic rate
Possible modes
SCPC DVB-S2
Description
FastLink 8QAM
FastLink 8QAM requires FastLink LDPC
z
8PSK
Including TCM
Rate 2/3 8PSK Pragmatic TCM to IESS 310
8PSK Turbo available - requires 2nd Generation Turbo FEC option
z
z
16QAM
16QAM - requires either 2nd Generation Turbo FEC option or LDPC option
IBS / SMS
Audio Channels
Satellite Framing to IESS 309 with low rate Intelsat ESC (to IESS 403) & High Rate IBS/SMS ESC
z
z
z
z
P1348 Emulation mode for IBS 64kbps carrier (2xaudio) or 128kbps (2xaudio + 64kbps data) - requires IBS / SMS & IDR options
Drop / Insert
including Extended D/I
T1/E1 linear order Drop/Insert, plus independent timeslot re-ordering on Tx & Rx. Signalling (E1 CAS & T1 RBS). Rx Partial Insert for multi-destinational working,
Timeslot ID maintenance for N=1 to 31 with IBS / SMS or Closed Net plus ESC. Drop/Insert can operate with any interface, although G.703 is typically used
(requires G.703 option if used in G.703 mode)
z
z
G.703 Clock Extension
Advanced AUX
Provides a stable G.703 E1 or T1 reference clock over satellite when traffic is NOT E1 or T1
z
z
z
z
Variable rate synchronous Aux channel for IBS / SMS - requires IBS / SMS option
IDR 32/64kbps in place of one/both audio ADPCM ESC channels - requires IDR option
Custom
Custom RS Outer Codec values of n, k and interleaver depth. Custom IBS / SMS modes, allocation of overhead between ESC and Aux channels in IBS / SMS, custom backward alarms in
IBS / SMS, and Closed Net plus ESC - requires IBS/SMS option. Custom IDR mode - requires IDR option.
z
z
z
EZ BERT - PRBS Tester
OM-73
Internal Bit Error Rate Tester (BERT) can run through main data channel, or ESC/Aux channels, or output/input via the terrestrial interface
OM-73 Scrambling, symbol mapping and Viterbi compatibility
z
z
z
z
z
z
48V DC Input
48V DC Primary power input in place of 100-240V AC input (hardware option)
Use with 16QAM to relax HPA backoff by up to 1.6dB. Compensates for HPA non-linearities in ground segment and/or transponder. Requires 16QAM option.
Transmit functions only
z
Adaptive Signal Predistorter
Tx Only operation
Rx Only operation
z
z
Receive functions only
Paired Carrier (carrier
Paired Carrier Ready, allows carriers to be overlapped thereby reducing the required satellite bandwidth.
(hardware option) - requires additional cumulative software options below depending upon data rate required
z
z
re-use) subject to prevailing
modem data rate limits.
Minimum occupied band-
width limit of 150kHz, and
maximum occupied bandwidth
limit of 36MHz
Paired Carrier up to 512kbps traffic rate - requires Paired Carrier Ready option
Extends Paired Carrier up to 1024kbps traffic rate - requires 512kbps option
Extends Paired Carrier up to 2.5Mbps traffic rate - requires 1024kbps option
Extends Paired Carrier up to 5Mbps traffic rate - requires 2.5Mbps option
Extends Paired Carrier up to 10Mbps traffic rate - requires 5Mbps option
Extends Paired Carrier up to 15Mbps traffic rate - requires 10Mbps option
Extends Paired Carrier up to 20Mbps traffic rate - requires 15Mbps option
Extends Paired Carrier up to 25Mbps traffic rate - requires 20Mbps option
Extends Paired Carrier up to 40Mbps traffic rate - requires 25Mbps option
Extends Paired Carrier up to 50Mbps traffic rate - requires 40Mbps option
Extends Paired Carrier up to 60Mbps traffic rate - requires 50Mbps option
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
4 OF 4
207822 REV A ECO 15932
|