S
P
E
C
F
I
L
E
Ceiling mount bracket
ET-PKF100S
Description
This ceiling mount bracket is to be used when mounting LCD projectors to the low ceiling.
Specifications
Vertical correction angle:
+5°, -15°
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W x H x D):
5°
5°
435 x 210 x 245 mm (17-1/8˝ x 8-9/32˝ x 9-21/32˝)
Note: Height (H) include holding brackets.
1.9 kg (4.2 lbs)
Weight:
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted screws (M4 x 12) . . . . . . . . . . . . 8
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Projector mount bracket . . . . . . . . . . . . . . . . . . 1
Holding bracket A . . . . . . . . . . . . . . . . . . . . . . 1
Holding bracket B . . . . . . . . . . . . . . . . . . . . . . 1
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• When the product is no longer going to be used, have it disposed of quickly by a professional
disposal service.
• Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or simi-
lar tool.)
Dimensions
Illustration shows the bracket attached to the
PT-F300NT/F300/FW300NT/FW300.
Attachment plate
Attachement
plate
3-Ø9.5 (3/8˝)
9.5 (3/8˝)
13 (1/2˝)*
189
(7-7/16˝)
Ø8.5
(11/32˝)
166.5
(6-9/16˝)
65 (2-9/16˝)
432
(17˝)
436 (17-5/32˝)
* From center of
rotation to center
of lens
104 (4-3/32˝)
130 (5-1/8˝)
150 (5-29/32˝)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
As of October 2008
< 1 >
|