Panasonic Camera Accessories HHR330APH User Manual

NICKEL METAL HYDRIDE BATTERIES: INDIVIDUAL DATA SHEET  
Typical Charge Characteristics  
HHR330APH  
Cylindrical L-Fat A size (HR 18/67)  
Dimensions (with Tube)  
(mm)  
2.0  
1.9  
1.8  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.1  
1.0  
0.9  
0.8  
Charge: 330mA(0.1 It)16hrs.  
18.2+0  
0.7  
-
-10˚C  
25˚C  
60˚C  
(+)  
0
2
4
6
8
10  
12  
14  
16  
18  
20  
Charge Time (hours)  
Typical Discharge Characteristics  
67.0+0  
1.5  
-
120  
110  
100  
90  
80  
70  
60  
( )  
Charge: 330mA(0.1 It)16hrs  
Disharge: 660mA(0.2 It),cut off voltage 1.0V  
Disharge Temperature: 25˚C  
50  
40  
30  
Specifications  
-20  
-10  
0
10  
20  
30  
40  
50  
60  
70  
mm  
inch  
Temperature (˚C)  
18.2+0/-0.7  
0.72+0/-0.03  
2.64+0/-0.06  
Ounces  
Diameter  
Height  
67.0+0/-1.5  
Grams  
60  
Approximate  
Weight  
2.12  
1.8  
Nominal Voltage  
1.2V  
3300 mAh  
3200 mAh  
Charge: 330mA(0.1 It)16hrs, 20˚C  
Discharge Temperature: 20˚C  
Average2  
Discharge  
Capacity1  
Rated (Min.)  
1.6  
1.4  
1.2  
1.0  
0.8  
Approx. Internal impedance  
at 1000Hz at charged state.  
Standard  
5.5m  
330mA x 16hrs.  
1650mA x 2.4 hrs.4  
165mA x 32 hrs.  
110mA x 48 hrs.  
10A  
20A  
Rapid3  
Charge  
Low Rate  
F
˚
C
˚
Standard  
Charge  
14˚F to 140˚F  
-10˚C to 60˚C  
-10˚C to 45˚C  
-10˚C to 60˚C  
-20˚C to 35˚C  
-20˚C to 45˚C  
-20˚C to 55˚C  
-20˚C to 65˚C  
Rapid  
Discharge  
< 1 year  
14˚F to 113˚F  
14˚F to 140˚F  
-4˚F to 95˚F  
-4˚F to 113˚F  
-4˚F to 131˚F  
-4˚F to 149˚F  
0
5
10  
15  
20  
25  
30  
Discharge Time (min.)  
< 6 months  
< 1 month  
< 1 week  
Storage  
1
2
3
After charging at 0.1It for 16 hours, discharging at 0.2It.  
For reference only.  
Need specially designed control system  
Control System:  
dT/dt cut-off; 1 to 2°C/min  
-UV cut-off; -UV per cell = 5 to 10 mV  
T-control; T=65°C  
Rapid charger timer; 2.4h (at 1.25a)  
Trickle timer; within 2h  
Note: [It] was previously expressed as [C]. [It] is an IEC standard expression  
for the amount of charge or discharge current and is expressed as:  
It(A) = Cn (Ah)/1h.  
4
With control system  
Battery performance and cycle life are strongly affected by how they  
are used. In order to maximize battery safety, please consult Panasonic  
when determining charge / discharge specs, warning label contents and  
unit design.  
• [It] is the reference test current in ampres  
• [Cn] is the rated capacity of the cell or battery in Ampere-hours.  
n = the time base [hours] for which the rated capacity is declared  
AUGUST 2005  
NICKEL METAL HYDRIDE HANDBOOK  
modification without notice. Contact Panasonic for the latest information.  
This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to  
 

Miele Refrigerator 09 170 080 User Manual
Miele Vacuum Cleaner S 2001 User Manual
National Instruments Computer Accessories 3x User Manual
NEC Computer Monitor E1100+ User Manual
Nokia Cell Phone 22 User Manual
NordicTrack Fitness Electronics NTL150085 User Manual
Nortec Industries Humidifier Pressure Steam Humidifier User Manual
Nortel Networks Network Card P0908546 User Manual
Panasonic Computer Drive LF D102U User Manual
Panasonic DVD Player DMP B200 User Manual