Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BDT460
DMP-BDT361
DMP-BDT360
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 13) or
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
If you have any questions, visit :
Register online at www.panasonic.com/register (U.S. customers only)
P
PC
SQT0080
Precautions
Wireless LAN connection
The following limits are in place regarding the usage of this unit. You
must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of this unit.
≥ Data transmitted and received over radio waves may be
intercepted and monitored.
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ This unit contains delicate electronic components.
≥ Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
Please use this unit in the manner in which it was intended and
follow the following points:
–
–
–
–
Do not expose this unit to high temperatures or direct sunlight.
Do not bend, or subject this unit to strong impacts.
Keep this unit away from moisture.
AC power supply cord
≥ The power plug is the disconnecting device. Install this unit so that
the power plug can be unplugged from the socket outlet
immediately.
Do not disassemble or alter this unit in any way.
Small object
≥ Keep the Memory Card out of reach of children to prevent
swallowing.
Restriction on use of
unauthorized copied content
This unit adopts the following technology for copyright protection.
CAUTION
Unit
Cinavia Notice
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may
result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles, on
this unit.
This product uses Cinavia technology to limit the use of unauthorized
copies of some commercially-produced film and videos and their
soundtracks. When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia
request additional information about Cinavia by mail, send a postcard
with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San Diego,
CA, 92138, USA.
Placement
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥ Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
To dispose or transfer this unit
Batteries
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete the
user settings. (> 30, “To return all settings to the factory preset.”)
≥ The operation history may be recorded in the memory of this unit.
Mishandling of batteries can cause electrolyte leakage and may
cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
≥ Do not mix old and new batteries or different types at the same
time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for
a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for a
long period of time. Store in a cool, dark place.
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the
correct method of disposal.
Conforms to UL STD 60065.
Certified to CAN-CSA STD C22.2 No.60065.
(Inside of product)
SQT0080
3
Table of contents
IMPORTANT SAFETY
Settings
INSTRUCTIONS. . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . 3
Option menu . . . . . . . . . . . . . . 22
Setup menu. . . . . . . . . . . . . . . 24
Getting started
Reference
Accessories . . . . . . . . . . . . . . . 5
Unit and media care . . . . . . . . . 5
Playable media. . . . . . . . . . . . . 6
Control reference guide . . . . . . 8
Troubleshooting guide . . . . . . 30
Specifications . . . . . . . . . . . . . 34
Limited Warranty . . . . . . . 37, 38
Referencia rápida en español
(Spanish Quick Reference). . . . 39
Index . . . . . . . . . . . . . Back cover
Connections and Settings
Connecting to a TV. . . . . . . . . . 9
Connecting to
an amplifier/receiver . . . . . . . . 9
Connecting to the network . . . 11
Settings . . . . . . . . . . . . . . . . . 12
Playback
Inserting or
removing media . . . . . . . . . . 14
HOME menu. . . . . . . . . . . . . . 15
Multi User Mode . . . . . . . . . . . 16
Playback. . . . . . . . . . . . . . . . . 17
Network Service
(Enjoying Netflix, etc.). . . . . . 19
Home Network feature . . . . . . 20
“HDMI CEC” . . . . . . . . . . . . . . 22
SQT0080
4
Accessories
Unit and media care
Check the supplied accessories before using this
unit.
∫ Clean this unit with a soft, dry
cloth
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
1
Remote control
(N2QAYB000953)
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
2
1
Batteries for remote control
AC power supply cord
(K2CB2YY00092)
∫ This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
[For_Canada]
The enclosed Canadian French label sheet corresponds
to the English display on the unit.
∫ Clean discs
≥ Product numbers are provided in this Owner’s Manual
correct as of December 2013. These may be subject to
change.
DO NOT
DO
≥ Do not use AC power supply cord with other equipment.
∫ Using the remote control
Wipe with a damp cloth and then wipe dry with a
dry cloth.
Insert the batteries to the terminal so that it (i
and j) matches those in the remote control.
∫ Disc and card handling
precautions
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥ Do not use the following discs:
R6/LR6, AA
(Alkaline or manganese batteries)
Point it at the remote control signal sensor on this
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
unit. (> 8)
SQT0080
5
Playable media
Media
markings
Device
Device types
Contents format
BD-Video
Video
Video,
JPEG, MPO
BD-RE
BD-R
BD
Video, MKV,
Xvid [For[Canada]
DVD-Video
DVD-R
Video
Video, AVCHD,
MKV, Xvid [For[Canada],
JPEG, MPO,
AAC, FLAC, MP3, WAV,
WMA
DVD
DVD-R DL
DVD-RW
Video, AVCHD
Music [CD-DA]
—
+R/+RW/+R DL
Music CD
MKV, Xvid [For[Canada],
JPEG, MPO
AAC, FLAC, MP3,
Music [CD-DA], WAV,
WMA
CD
CD-R
CD-RW
—
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
AVCHD, AVCHD 3D,
MP4,
JPEG, MPO
SD
(Compatible with both mini and micro types)
MKV, MP4, MPEG2,
Xvid [For[Canada],
JPEG, MPO,
AAC, FLAC, MP3, WAV,
WMA
USB devices
(up to 2 TB)
USB
—
≥ See pages 7 and 34 for more information on the types of content that can be played.
SQT0080
6
∫ Types of discs that cannot be
played in this unit
∫ Music CD
≥ Operation and sound quality of CDs that do not
comply with CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed to work.
≥ The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
Any other disc that is not specifically
supported or previously described.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ HD DVD
∫ SD card
≥ miniSD Cards, microSD Cards,
microSDHC Cards and microSDXC
Cards can be used, but must be used
with an adaptor card. These are
usually supplied with such cards, or
otherwise customer provided.
≥ To protect the card’s contents, move
the record prevention tab (on the SD card) to
“LOCK”.
≥ This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory
Cards in FAT32 format and SDXC Memory
Cards in exFAT.
∫ Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
Example:
BD-Video
DVD-Video
1
≥ The unit cannot playback discs in PAL format.
∫ Finalize
Any DVD-R/RW/R DL, +R/+RW/+R DL and
CD-R/RW that are recorded by a recorder need to
be finalized by the recorder to play on this unit.
Please refer to the recorder’s owner’s manuals.
≥ If the SD card is used with incompatible
computers or devices, recorded contents may
be erased due to the card being formatted etc.
≥ Usable memory may be slightly less than the
card capacity.
∫ BD-Video
≥ This unit supports high bit rate audio (Dolby®
Digital Plus, Dolby® TrueHD, DTS-HD High
Resolution AudioTM and DTS-HD Master
AudioTM) adopted in BD-Video.
∫ USB device
≥ This unit does not guarantee connection with all
USB devices.
≥ [BDT361] [BDT360] : If “Dolby D/Dolby D +/Dolby
TrueHD” is set to “PCM” and “DTS Neo:6” is set
to “Off”, the maximum possible number of
Dolby® sound is 5.1ch PCM. (> 25)
≥ This unit does not support USB device
charging.
≥ FAT12, FAT16, FAT32, and NTFS file systems
are supported.
≥ This unit supports USB2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized, the
power to the HDD may not be supplied. Supply
power from an external source.
∫ 3D
≥ 3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
≥ 2D video can be enjoyed as 3D virtually. (> 23)
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.
SQT0080
7
Control reference guide
When other Panasonic devices respond to the
remote control of the unit, change the remote
control code. (> 28)
1
2
Turn the unit on and off
TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
10
11
1
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers or
characters
2
12
3
13
4
5
6
Cancel
14
15
16
3
Basic playback control buttons (> 17)
Show Closed Caption setup screen
(> 23, 26)
Show Pop-up menu/Top menu (> 17)
Show Option menu (> 22)
Colored buttons (red, green, yellow, blue)
Used for various purposes depending on the
display.
4
5
7
8
9
6
7
17
18
10 Transmit the remote control signal
11 Open or close the disc tray (> 14)
12 Show the status messages (> 18)
13 Switch Secondary Video on/off
(Picture-in-picture) (> 23)
19
20
14 Change audio (> 17)
8
9
21
15 Show MiracastTM screen (> 20)
16 Show the Home Screen of Network Service
(> 19)
17 Exit the Menu screen
18 Show Netflix screen (> 19)
19 Show HOME menu (> 15)
20 [3, 4, 2, 1] : Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 17)
21 Return to previous screen
8
9
10
Pull to flip down
the front panel.
SD CARD
1
2
3 4 5
6
7
1
2
Disc tray (> 14)
6
7
8
9
USB port (> 14)
Display
Open or close the disc tray (> 14)
Basic playback control switches (> 17)
Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20 up and down, 30 left and right
e
e
3
[BDT460] [BDT361/360_for_U.S.A.]
10 Standby/on switch (Í/I) (> 12)
Blue LED
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
It is possible to set the LED to turn on/off. (> 28)
SD card slot (> 14)
4
5
[BDT460] V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off. (> 28)
Rear panel terminals (> 9–11)
SQT0080
8
Connecting to a TV
Connect the power supply cord after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power outlet.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic’s HDMI cable. When outputting 1080p or 24p (4K) signal, please use HDMI
cables 5.0 meters (16.4 ft.) or less.
To an AC outlet
[BDT460]
HDMI cable
HDMI IN
[BDT361]
[BDT360]
AC power supply cord
(supplied)
≥ [BDT460] : Use HDMI AV OUT MAIN terminal.
≥ This unit consumes a small amount of AC power (> 34) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
HDMI AV OUT
HDMI cable
[BDT460]
HDMI cable
HDMI OUT
(ARC)
HDMI IN
(ARC)
HDMI IN
[BDT361]
[BDT360]
Amplifier/receiver
≥ [BDT460] : Use HDMI AV OUT MAIN terminal.
≥ Set “Digital Audio Output” (> 25).
≥ When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, then
connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to
5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
SQT0080
9
HDMI AV OUT SUB [BDT460]
You can enjoy richer sound by using the HDMI AV OUT SUB terminal.
HDMI cable
HDMI cable
HDMI IN
HDMI IN
Amplifier/receiver
≥ Set “HDMI(SUB) Output Mode” to “V.OFF”. (> 25)
– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.
≥ It is possible to play back 3D videos, 3D still pictures and 24p (4K) videos, etc., when the connected
TV is 3D or 4K compatible, even if the amplifier/receiver is not 3D or 4K compatible.
≥ The HDMI connection using HDMI AV OUT MAIN supports HDMI CEC (> 22).
The HDMI AV OUT SUB terminal is not compatible with the HDMI CEC.
OPTICAL
Optical digital cable
OPTICAL IN
Amplifier/receiver
≥ Set “HDMI Audio Output” to “Off” (> 25).
≥ Set “Digital Audio Output” (> 25).
SQT0080
10
Connecting to the network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 13)
≥ You can enjoy BD-Live (> 18)
≥ You can enjoy Network Service (> 19)
≥ You can access other devices (Home Network) (> 20)
≥ This unit supports Wi-Fi DirectTM and can make a wireless connection to wireless devices without
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Wi-Fi DirectTM. (> 20, 26)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
This unit has built-in Wi-Fi® and can be connected to a wireless router.
Internet
Wireless router, etc.
≥ For up-to-date compatibility information on your wireless router, refer to
(This site is in English only.)
For additional information about this unit refer to
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
≥ See page 3 for the precautions for wireless LAN connection.
LAN cable connection
LAN Cable
Broadband router, etc.
Internet
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
SQT0080
11
Settings
∫ About the wireless connection
The following settings can be performed anytime
To obtain your network name (SSID*) and
encryption key (password).
in the Setup menu (> 26, 27).
e.g.
The default settings may be
printed on the router. If the SSID
and password have been
changed, consult the person
responsible for setting up your
network.
Easy Settings
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Preparation
Turn on the TV and select the appropriate
video input.
For more details, refer to the
manual supplied with the wireless broadband
router, or contact your Internet provider.
For more information or assistance, refer to
(U.S. customers only)
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions to
continue with the settings.
If your SSID is not displayed;
Search again by pressing the red button on the
remote control.
Wireless Settings
Select a wireless network for connection.
Press the green button to connect via
WPS (PUSH button method).
Easy Network Setting
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
SSID
Reception
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
Select “Wired” or “Wireless” and press [OK].
Easy Network Setting
Select a connection mode.
Search again
OPTION
WPS (PUSH)
OK
RETURN
Stealth SSIDs will not be displayed; in this case,
enter manually in the following order.
1
To display the SSID input screen :
Press [HOME]
Wired
Wireless
> select [OK] to select “Setup”
> select “Player Settings”
OK
RETURN
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]
Enter your SSID.
Follow the on-screen instructions to establish
your connection settings.
2
≥ If your wireless network is encrypted, go to
page 13.
If your wireless router supports WPS (Wi-Fi
Protected SetupTM);
You can easily set up a connection by pressing
the green button on the remote control.
SQT0080
12
If your wireless network is encrypted;
Enter your encryption key (password).
≥ You can switch between capital and lower case
letters by pressing the “Shift” key.
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
Encryption Key (Password)
l
Shift
Delete
Finish
1
2
3
:
4
~
5
6
7
,
8
9
0
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
.
#
“
@
;
*
`
When a new firmware version is available, the
following message is displayed.
Space
/
_
-
Symbols
Alphanumeric
Other Characters
Firmware Update
OK
RETURN
'PVGTꢀꢁECUGꢀUGPUKVKXGꢂ
New Version:
X.XX
Current Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
≥ Refer to the owner’s manuals of the hub or router.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
Yes
No
OK
RETURN
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FIN” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
The firmware was updated.
Current Version x.xx
:
RETURN
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
(This site is in English only.)
To show the firmware version on this unit.
(> 29, “Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 29)
SQT0080
13
Playback
Inserting or removing
media
SD CARD
Notes
≥ When inserting a media item, ensure that it is
facing the correct way, which is the right side
facing up.
≥ When removing the SD card, press the center
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
SQT0080
14
Videos/Photos/Music
Disc
HOME menu
Major functions of this unit can be operated from
the HOME menu.
Play back the contents. (> 17)
≥ When multiple contents are
recorded, select the types of
contents or the title.
Preparation
Turn on the TV and select the appropriate video
input.
USB
SD Card
Network
1 Press [Í] to turn on the unit.
≥ After network service introduction banner is
shown, the HOME menu is displayed.
–When connected to the network, the
banner content may be changed.
–You can disable the “Start-up Banner”
(> 28).
Network
Service
Displays the Home Screen of
Network Service. (> 19)
DLNA Client (> 20)
Miracast (> 20)
Home
Network
Media Renderer (> 21)
Setup
2
Press [OK] or [
3
,
4
,
2
,
1] to select the item.
Player
≥ If there are any other items, repeat this
(> 24)
Settings
step.
USB
Management
(> 18)
HOME
Network
Changes the background of
HOME menu.
Blu-ray Disc Player
Wallpaper
Photos
Setup
Music
To show the HOME menu
Press [HOME].
Videos
Setup
Personalize
1st user
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when
using a disc with both data files (MP3, JPEG, MKV, etc.)
and Video (BDAV and AVCHD). (> 28)
SQT0080
15
Multi User Mode
Personalizing a new user
Multi User Mode allows individuals to customize
settings and switch to their saved settings easily.
Up to four people can use the unit with their own
settings.
1 Press [HOME].
2 Press the colored button that indicates
new user personalization.
The following settings can be personalized:
≥ The user icon
≥ The wallpaper of HOME menu
≥ The specific settings (> 22, 24)
3 Select an item and change the settings
according to the indications.
The following items can be set.
Input
HOME
Personalize a user name.
Nickname
User 1
A
Network
Blu-ray Disc Player
Personalize a user icon.
Photos
Setup
Music
Select from Illustrations
The image can be selected from
Videos
prepared illustrations.
Select Icon
Setup
User 1
Personalize
2nd user
Create from Photos
B
You can select a photo in
recording media as an icon.
(> 23, “Icon Personalization”)
A
B
The user name and icon currently selected
Personalize a new user and switch between
users with colored buttons.
Personalize a background of the
HOME menu.
Select
Wallpaper
≥ In addition to the default
wallpapers, you can select a
photo in recording media as a
wallpaper. (> 23, “Wallpaper”)
4 Select “Confirm” and press [OK].
To change the personalized user information
Select “Edit User Information” from Setup menu.
(> 28)
Switching the user
information
Press the colored buttons in the HOME menu
to switch to the user information
corresponding to the button.
SQT0080
16
Playback
Search/Slow motion
Search
1 Insert the media.
While playing, press [SEARCH6] or
[SEARCH5].
Playback starts depending on the media.
Slow motion
While paused, press [SEARCH5].
2 Select the item to play and press [OK].
Repeat this step if necessary.
The speed increases up to 5 steps.
≥ Music, MP3, etc.: The speed is fixed to a single
step.
≥ Press [1PLAY] to revert to normal playback
speed.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your TV screen and so
on.
≥ [BDT460]: When the following conditions are met, a still
picture will be played back in 4K. The resolution of the still
picture will be changed automatically.
– The unit is connected to a 4K compatible TV
– “HDMI Resolution” is set to “Auto” (> 24)
– The still picture is being played back in 2D
≥ It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
Skip
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
≥ To save on electricity, this unit is turned off automatically if
there is no button operation for about 30 minutes when not
playing back (such as when paused or displaying the
menu, displaying still pictures, etc.). (Compatible with
ENERGY STAR SPECIFICATIONS)
Frame-by-frame
While paused, press [1] (;1).
≥ Press and hold to fast forward.
≥ Press [1PLAY] to revert to normal playback
speed.
Operations during playback
Changing audio
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
The following functions may not work depending
on the media and contents.
Stop
Press [∫STOP].
The stopping point is memorized.
Show top menu/pop-up
menu
Resume play function
Press [POP-UP MENU/TOP MENU].
≥ Select the item and press [OK].
Press [1PLAY] to restart from this point.
≥ The point is cleared if the media is removed.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart
play.
SQT0080
17
Show the status messages
Enjoying BD-Live
While playing, press [STATUS].
With “BD-Live” discs, you can enjoy bonus
contents that use Internet access.
For this BD-Live function, connection of a USB device
is necessary along with Internet connection.
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or disappear from the screen.
≥ Depending on media and contents, the display
may change or not appear.
1 Perform network connection and settings.
(> 11, 12)
e.g., BD-Video
2 Connect a USB device with 1 GB or more
free space.
A
B
BD-Video
Play
≥
The USB device is used as the local storage.
T1 C1 0:05.14
0:20.52
D
3 Insert the disc.
C
A
B
C
D
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
Current position
∫ Deleting data on the USB device
Select “USB Management” in the HOME menu
(> 15), then select “BD-Video Data Erase” and
press [OK].
Total time
e.g., JPEG
1 / 26
Date
11/12/2007
500 X 375
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 27).
Size
Manufacturer
Equipment
Slideshow
Enjoying 3D video and
photos
Play a slideshow of photos and adjust various
settings during the playback.
Preparation
Connect this unit to a 3D compatible TV. (> 9)
≥ Perform the necessary preparations for the TV.
1 Insert the media.
2 Select “Photos”.
≥ Play back following the instructions displayed
on the screen.
≥ 3D Settings (> 23, 26)
3 Select an item and press the green button.
The following items can be set.
Start the slideshow.
≥ Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue use
and rest your eyes.
Start
Slideshow
You can display still pictures in
the selected folder one by one at
a constant interval.
≥ 3D video might not output the way it is set in “HDMI
Resolution” and “24p(4K)/24p Output”. (> 24)
≥ When playing back 3D photos from “Photos” screen, select
from the “3D” list. (Still pictures in “2D” are played back in
2D.)
If “2D” and “3D” indications are not displayed, press the red
button on the remote control to switch the view of playback
contents.
Display
Interval
Change the display interval.
Transition
Effect
Select the effect when sliding
pictures.
Repeat Play Set whether to repeat the slideshow.
≥ Still pictures displayed as “
” cannot be played back
with this unit.
SQT0080
18
Network Service
(Enjoying Netflix, etc.)
≥ When playing content in the media, Network Service
cannot be accessed by pressing [INTERNET].
≥ In the following cases, settings are possible using the
Setup menu items.
– When restricting the use of Network Service
(> 27, “Network Service Lock”)
Network Service allows you to access some
specific websites supported by Panasonic.
≥ Some services, such as Netflix require a
registered account.
– When correcting the displayed time
For details of your Netflix account, refer to
Netflix.
(> 27, “Time Zone”, “DST”)
– When using another device such as a smartphone in
combination with the unit by using a certain app on the
device
(> 27, “Remote Device Operation”)
≥ When using a slow Internet connection, the video may not
be displayed correctly. A high speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware as soon as a firmware
update notice is displayed on the screen. If the firmware is
not updated, you may not be able to use Network Service
function properly. (> 13)
Network Service provides a variety of
selected Internet services such as the
following.
≥ Online movie rental service
≥ Video browsing service
≥ Network Service Home Screen is subject to change
without notice.
≥ The services through Network Service are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
XXXXX
*
XXXXX
X
XXXXXXXXXXXXXXXXXXXX
XXXXXXXX
XXXXXX
≥ Some features of websites or content of the service may
not be available.
≥ Some content may be inappropriate for viewers.
≥ Some content may only be available for specific countries
and may be presented in specific languages.
Fi
MORE
BACK
XXXXXXXXXXX
XXXX
XXXX
XXXXXXXX
Market
Internet
*
Images are for illustration purposes, contents may change
without notice.
Preparation
≥ Network connection (> 11)
≥ Network settings (> 12)
1 Press [INTERNET].
≥ Netflix can be accessed directly by pressing
[NETFLIX] button.
2 Select the item and press [OK].
To exit from Network Service
Press [HOME].
SQT0080
19
Home Network feature
Playing back contents on
the DLNA server
You can share photos, videos and music stored in
the DLNA Certified media server (PC with
Windows 7 installed, smartphone, etc.) connected
to your home network.
Before using the following features, be sure to
configure the connected equipment on your
Home Network.
Using MiracastTM
≥ About support format of DLNA (> 35).
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
≥ Compatible with AndroidTM devices, ver. 4.2 and
above and Miracast certified.
For information on whether the smartphone,
etc. supports Miracast, contact the
manufacturer of the device.
Server
Player
Preparation
1
Perform network connection (> 11) and
network settings (> 12) of this unit.
Add the contents and folder to the libraries of
the Windows Media® Player or the
smartphone, etc.
2
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the
libraries.
Miracast
Player
compatible device
1 Press [HOME].
2 Select “Network”.
3 Select “Home Network”.
4 Select “DLNA Client”.
1 Press [MIRACAST].
2 Operate the Miracast compatible device.
≥ On the device, enable Miracast and select
this unit (DMP-BDT460 or DMP-BDT360)
as the device to be connected.
For details, refer to the instructions supplied
with the device.
≥ The list can be updated by pressing the red
button on the remote control.
≥ The connection method can be switched to
Wi-Fi Direct by pressing the green button
on the remote control.
[BDT361] With the default setting, the unit
name will be displayed as “DMP-BDT361”.
5 Select the equipment and press [OK].
6 Select the item to play and press [OK].
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
To exit from Miracast
Press [HOME].
To exit from Home Network
Press [HOME].
SQT0080
20
Using the Digital Media
Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to playback contents
from DLNA server on the Renderer (this unit).
About DLNA and Media renderer
For more details, refer to the following website
and the owner’s manuals for each of the
equipment.
(This site is in English only.)
Possible applications:
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
*
Server
≥ Depending on the contents and the connected equipment,
playback may not be possible.
Renderer
*
≥ Items displayed in gray on the display cannot be played
back by this unit.
Controller
*
Server
+
Renderer
Controller
*
DMC compatible software should be installed.
Preparation
Perform steps 1and 2. (> 20)
3
Perform the “Remote Device Settings”.
(> 27)
≥ You can register up to 16 devices.
1 Press [HOME].
2 Select “Network”.
3 Select “Home Network”.
4 Select “Media Renderer”.
5 Select “Home Network” or “Wi-Fi Direct”
and press [OK], then follow the indications
on the screen.
6 Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
SQT0080
21
Settings
Option menu
“HDMI CEC”
A variety of playback operations and settings can
be performed from this menu.
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
Available options differ depending on the playing
contents and the condition of the unit.
You can use this function by connecting the
equipment with an HDMI cable*. See the
owner’s manuals for connected equipment for
operational details.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu. (> 16)
* [BDT460] : Only when connecting via an HDMI AV OUT
MAIN terminal on this unit.
Preparation
1 Press [OPTION].
1
2
3
Set “HDMI CEC” to “On” (> 28). (The default
setting is “On”.)
≥ When playing music, select “Playback
Set the “HDMI CEC” operations on the
connected equipment (e.g., TV).
Turn on all “HDMI CEC” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDMI CEC”
function works properly.
Settings” and press [OK].
e.g., BD-Video
Operation Menu
Soundtrack
1ENG DTS-HD MSTR ...
Subtitle
Angle
Repeat this procedure when the
connections or settings are changed.
Repeat Play
Status
Off
Primary Video
Secondary Video
Zoom
MPEG-4 AVC
Top Menu
Pop-up Menu
Closed Caption
Automatic input switching
Power on link
2 Select an item and change the settings.
When the unit starts playback, the TV will
automatically switch the input channel and the
screen of the unit will be displayed.
Additionally when the TV is off, the TV will
automatically turn on.
To exit the screen
Press [OPTION].
Regarding Language : (> 35)
Operation Menu
∫ Soundtrack
Show or change the soundtrack.
Power off link
All connected equipment compatible with “HDMI
CEC”, including this unit, automatically turns off
when you switch the TV off.
∫ Audio channel
Select the audio channel number.
∫ Subtitle
Change the subtitle settings.
≥ This unit supports the “HDMI CEC” (Consumer Electronics
Control) function. However, operation cannot be
guaranteed on all HDMI CEC devices.
∫ Angle
Select the number of the angle.
∫ Repeat Play
Select the item that you want to repeat.
≥ You can repeat the playback of a chapter,
playlist, the entire disc, etc., but the items
displayed will differ depending on the type of
the media.
≥ Select “Off” to cancel.
SQT0080
22
∫ Shuffle
Video Settings
Select whether or not to play random.
∫ Picture Mode
∫ Start Slideshow
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in
“Picture Adjustment”.
Start the slideshow.
∫ Status
Show the status messages.
∫ Picture Adjustment
Specific picture quality settings can be changed.
∫ Rotate Right
∫ Rotate Left
Rotate the still picture.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
∫ Wallpaper
Set the still picture to the wallpaper of HOME
menu. (> 15)
≥ When the content is distorted, change the
settings from “Auto” to “Video”.
∫ Icon Personalization
Set the still picture as your user icon. (> 16)
∫ 24p
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
≥ Only when you have selected “24p(4K)” or
“24p” in “24p(4K)/24p Output” (> 24).
∫ Video
The recording method of original video appears.
∫ Primary Video
The recording method of original primary video
appears.
∫ Reset to Default Video Settings
Return video settings to the factory defaults.
∫ Secondary Video
3D Settings
Select on/off for images. The
recording method of original
∫ Signal Format
video appears.
≥ During search/slow motion or
Video
Original
Keep original picture format.
3D picture format comprising of
left and right screens.
frame-by-frame, only the
primary video is displayed.
Side by side
Converts 2D pictures to 3D
effect.
Select on/off for audio and the
language.
2D to 3D
Soundtrack
∫ Distance
∫ Zoom
Set the amount of depth perception.
Videos and pictures are magnified.
∫ Top Menu
Display Top Menu.
∫ Pop-Out Level
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Menu
Display Menu.
∫ Closed Caption
(> 26)
You can only set “Manual setting” and “CC Reset”
in the Setup menu.
SQT0080
23
Setup menu
Video
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
∫ Picture Mode
(> 23)
Some items are common to the Option menu. You
can get the same effect with both menus.
∫ Picture Adjustment
(> 23)
∫ HDMI Output
About Multi User Mode
Press [OK] to show the following settings:
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu. (> 16)
¾HDMI Resolution
The items supported by the connected devices
are indicated on the screen as “¢”. When any
item without “¢” is selected, the images may be
distorted.
≥ If “Auto” is selected, the best suited output
resolution to the connected TV is
1 Press [HOME].
2 Press [OK] to select “Setup”.
3 Select “Player Settings”.
Player Settings
automatically selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
TV). If this unit is connected to an HDTV
through other equipment, the other equipment
must also be 1080p compatible.
Picture Mode
Normal
Video
Audio
3D
Picture Adjustment
HDMI Output
Language
Network
Ratings
System
¾24p(4K)/24p Output
This setting is for selecting the output method
for content recorded in 24p*1, such as movies.
OK
RETURN
Outputs signals by upconverting
them to 4K*2.
24p(4K)
4 Select an item and change the settings.
24p
Outputs in 24p.
To exit the screen
Press [HOME].
≥ Connect the compatible TV for each (4K or
1080/24p) output to the HDMI AV OUT MAIN
[BDT460]/HDMI AV OUT [BDT361] [BDT360]
terminal of this unit.
≥ “24p(4K)” works only when playing back in
2D.
≥ When playing DVD-Video, set this setting to
“24p(4K)” or “24p”, and then “24p” in “Video
Settings” (> 23) to “On”.
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
¾HDMI Color Mode
This setting is for selecting color-space
conversion of the image signal.
¾Deep Color Output
This setting is for selecting whether to use Deep
Color Output when a TV that supports Deep
Color is connected.
SQT0080
24
¾Contents Type Flag
¾HDMI Audio Output
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
This setting selects whether or not to output
audio from HDMI.
≥ Select “Off” when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an OPTICAL
terminal.
¾HDMI(SUB) Output Mode [BDT460]
Set to output the video from the HDMI AV OUT
SUB terminal or not.
*1
*2
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
A high resolution image/display technology of
approximately 4000 (width) k 2000 (height) pixels.
∫ PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz for the PCM output from the
OPTICAL.
≥ If “On” is selected, the signals that are
converted to 48 kHz are output.
≥ If “Off” is selected, and the connected
equipment does not support 96 kHz, the sound
will not be output normally.
Audio
∫ Dynamic Range Compression
≥ Signals are converted to 48 kHz despite the
settings in the following cases:
You can listen at low volumes but still hear
dialogue clearly.
– when the signals have a sampling frequency
of 192 kHz
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to
“On”
≥ “Auto” is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
∫ Downmix
Press [OK] to show the following settings:
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
≥ If you do not make proper settings the audio
may be static or noisy.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
≥ This function works when the following
conditions are met:
– Audio is output from the HDMI AV OUT
terminal.
– Audio recorded at 96 kHz or lower is output.
– “Digital Audio Output” is set to “PCM” when
audio other than PCM is output.
SQT0080
25
∫ Closed Caption
3D
Closed captioning services are dependent on
contents, and the unit can display closed captions
of both digital and analog types.
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
Press [OK] to show the following settings:
¾Closed Caption Display
∫ 3D AVCHD Output
Set whether or not to display closed captions.
Select the output method of 3D AVCHD videos.
¾Closed Caption Type
∫ 3D Playback Precautions
Select the closed caption type that matches the
one of the content to be played back.
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
¾Analog CC
Select the channel of analog closed captions.
∫ Pop-Out Level
(> 23)
¾Digital CC
Select the channel of digital closed captions.
Language
¾Manual setting
∫ Audio Language
Set the display style of closed captions.
Choose the language for audio.
≥ If “Original” is selected, the original language of
each disc will be selected.
≥ Enter a code (> 35) when you select “Other
¢¢¢¢”.
¾CC Reset
Restore the default “Closed Caption” settings.
∫ Subtitle Language
Choose the language for the subtitle.
Network
∫ Easy Network Setting (> 12)
≥ If “Auto” is selected and the language selected
for “Audio Language” is not available, subtitles
of that language will automatically appear if
available on that disc.
≥ Enter a code (> 35) when you select “Other
¢¢¢¢”.
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
¾LAN Connection Mode
Select the LAN connection method.
≥ Select “Wireless Master” when you make a
direct wireless connection between this unit
and a Home Network device. Internet
connection is not available when this item is
selected.
∫ Menu Language
Choose the language for the disc menus.
≥ Enter a code (> 35) when you select “Other
¢¢¢¢”.
∫ Subtitle Text
Select a desired item according to the language
used for MKV/Xvid [For[Canada] subtitles text.
≥ This item is displayed only after playing back a
file.
¾Wireless Settings
This allows the wireless router and connection
settings to be set up. Current connection
settings and connection state can be checked.
Press [OK] to show the following settings:
∫ On-screen Language
Choose the language for menus and on-screen
messages.
Connection Setting
The wireless router connection wizard will be
displayed.
SQT0080
26
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz
wireless format.
Setting Unit Name
Set the name of this unit to be displayed on
the connected equipment.
≥ If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
Registration Type
Allow connections to all the
Auto
equipment accessing this unit.
Set the permission for
individual equipment
connections accessing this
Manual
¾IP Address/DNS Settings
unit.
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Remote Device List
Registering/deregistering of the displayed
equipment can be performed when “Manual”
in “Registration Type” is selected.
Press [OK] to show the respective setting.
¾Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
¾BD-Live Internet Access (> 18)
You can restrict Internet access when BD-Live
functions are used.
≥ If “Allow ( Limited )” is selected, Internet
access is permitted only for BD-Live contents
which have content owner certificates.
¾Network Service Settings (> 19)
Press [OK] to show the following settings:
Time Zone
Set the unit’s time to match your location.
≥ Some Network Service contents require the
time zone to be set. Set time zone if
necessary.
Ratings
The following items use the same password.
Don’t forget your password.
DST
Select “On” when using Daylight Saving time.
∫ DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
¾Network Drive Connection
It is possible to access the shared folder of
equipment not compatible with DLNA, such as
the Windows XP operating system, and play
back video, still pictures, and music on this unit.
For the setting and operation method of
connected equipment, refer to the following
website.
∫ BD-Video Ratings
Set an age limit of BD-Video play.
∫ Network Service Lock
You can restrict the usage of Network Service.
System
(This site is in English only.)
∫ Easy Settings
You can execute basic settings.
¾Remote Device Settings (> 19, 21)
Press [OK] to show the following settings:
∫ Display Settings
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate the unit by DMC, etc.
≥ If “On” is selected, “Quick Start” will be
activated.
SQT0080
27
¾TV Aspect
¾Mixed Data Disc Option
Set to match the type of TV connected.
Select the playback contents on discs with both
data files and Video.
≥ If “MP3/JPEG/MKV” is selected, data file can
be played back.
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
The sides are cut
off so the picture
≥ If “BDAV/AVCHD” is selected, BDAV and
AVCHD can be played back.
4:3 Pan &
Scan
fills the screen.
When playing
¾Front Panel Display
BD-Video, video is output as “4:3
Letterbox”.
Changes the brightness of the unit’s display.
≥ If “Auto” is selected, the display is set to bright
and only dimmed during playback.
Black bands
appear at the top
and bottom of the
picture.
4:3
Letterbox
¾Blue LED [BDT460] [BDT361/360_for_U.S.A.]
Set whether to light the blue LED in the center
of this unit when turned ON.
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
¾HDMI(SUB) V.OFF LED Control [BDT460]
Set to light the HDMI (SUB) V.OFF LED or not.
≥ This will light when “HDMI(SUB) Output
Mode” (> 25) is set to “V.OFF”.
Video is displayed as a 4:3 ratio
16:9
image in the center of the
screen.
¾Edit User Information
Change the user information registered in the
HOME menu.
Video is displayed as a
horizontally stretched 16:9
image.
16:9 Full
∫ Start-up Banner
Select whether to display the banner after turning
on this unit. (> 15)
¾Screen Saver Function
This is to prevent image retention on the
screen.
∫ Quick Start
≥ When this is set to “On”:
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
Speed of start-up from standby mode is
increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to “Off”.
(Power consumption > 34)
¾Status Messages
∫ Remote Control Code
Choose whether to show status messages
automatically.
Change the remote control code if other
Panasonic products react to this remote control.
¾HDMI CEC
∫ Firmware Update (> 13)
Set to use “HDMI CEC” function when
connected via HDMI cable to a device that
supports “HDMI CEC”.
Press [OK] to show the following settings:
≥ Select “Off” when you do not want to use
“HDMI CEC”.
∫ Unit Settings
Press [OK] to show the following settings:
SQT0080
28
¾Automatic Update Check
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
¾Update Now
You can update the firmware manually if a
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
¾License
Information about the software used by this unit
is displayed.
¾Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
∫ Restore Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, on-screen language, etc.
SQT0080
29
Reference
Troubleshooting guide
General operation
Before requesting service, please perform the
following steps.
To return to the factory defaults.
¾
Select “Yes” in “Restore Default Settings” in
the Setup menu. (> 29)
∫ Unit does not respond to remote
control or unit’s buttons.
Disconnect AC power supply cord, wait 1 minute,
then reconnect AC power supply cord.
To return all settings to the factory preset.
¾
Reset the unit as follows:
1
2
Turn the unit on.
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (> 13)
4
Make the following checks and visit our
website for more information.
For U.S.A. :
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “08 FIN” is displayed on the unit’s
display.
3
4
Press and hold [OK] for more than 5 seconds.
Enter the model number.
For Canada :
The remote control does not work properly.
¾
Change the batteries in the remote control.
(> 5)
4
¾
The remote control and this unit are using
different codes. If “SET ” is displayed on the
unit’s display when a button is pressed on the
remote control, change the code on the
remote control.
Or visit our website to find a service center.
You can find a service center near you easily
on our website.
Other support information:
Press and hold [OK] and the displayed
number (“”) for at least 5 seconds.
“Customer Services Directory (United States
and Puerto Rico)” (> 37) or “CONTACT
INFORMATION” (> 38).
The TV tuner mode is not displayed when the
TV is turned on.
¾
This phenomenon may occur, depending on
the TV setting, when “Quick Start” is set to
“On”.
Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
The following do not indicate a problem with
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
¾
∫ Cannot eject disc.
1
Turn the unit on.
You have forgotten your ratings password.
You want to cancel the ratings level.
2
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “06 FTO” is displayed on the
unit’s display.
¾
The ratings level returns to the factory
defaults.
1
2
Turn the unit on.
3
4
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the unit’s
Press [OK].
3
4
display
.
Press [OK].
SQT0080
30
The TV screen turns black.
Video is not output. [BDT460]
¾
In the following cases, HDMI authentication
takes place and a black screen is displayed:
– When “24p Output” is set to “On”.
– When the display is switched between 2D
and 3D images.
¾
Video from the HDMI AV OUT SUB terminal is
not output when the “HDMI(SUB) Output
Mode” is set to “V.OFF”. (> 25)
Video is not output in high-definition.
– [BDT460] : When you quit the 4K playback of
a still picture by displaying another screen,
including the Home menu.
¾
Confirm that “HDMI Resolution” in the Setup
menu is set properly. (> 24)
3D video is not output.
This unit does not recognize the USB
connection correctly.
¾
¾
Connect to a full high-definition TV.
Is there a non-3D compatible amplifier/
receiver connected between this unit and a
TV? (> 9)
[BDT460] : If there is a non-3D compatible
amplifier/receiver connected to the HDMI AV
OUT SUB terminal, set the “HDMI(SUB)
Output Mode” to “V.OFF”. (> 10)
Are the settings on this unit and the TV
correct? (> 18)
Is the amplifier/receiver that is connected
between this unit and TV on?
Depending on the connected TV, the video
being played back might switch to 2D video
due to changes in resolution etc. Check the
3D setting on the TV.
¾
Disconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
¾
¾
USB devices may not be recognized by this
unit when connected using the following :
– a USB hub
– a USB extension cable
¾
¾
¾
¾
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
Picture
The images from this unit do not appear on
the TV.
Picture is distorted.
3D video is not output correctly as 2D.
¾
Select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 26, “3D
BD-Video Playback”)
Discs that have recorded titles with Side by
side (2 screen structure) and that can be
enjoyed in 3D are played back in accordance
with the settings of the TV.
¾
An incorrect resolution is selected in “HDMI
Resolution”. Reset the setting as follows:
Turn the unit on.
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “04 PRG” is displayed on the
unit’s display.
1
2
¾
3
4
No subtitles.
When progressive output is on, closed
captions/subtitles cannot be displayed.
¾
Press and hold [OK] for more than 5 seconds.
Set the item again. (> 24)
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD® audio are not output properly,
select “Yes” in “Restore Default Settings”
(> 29) and make proper settings.
The subtitles overlap closed captions
recorded on discs.
¾
Turn off the subtitles or the closed captions.
(> 22, 26)
¾
¾
When “3D BD-Video Playback” in the Setup
menu is set to “Auto”, images may not be
output depending on the connection method.
After removing the disc from this unit, select
“Set before play” in the Setup menu, and
select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 26)
When outputting in 24p (4K), images may be
distorted depending on the HDMI cable. Use
an HDMI cable that supports 4K output.
Closed captions are not displayed.
¾
¾
Confirm that the source content supports CC.
Confirm the “Closed Caption Display” is set to
“On”. (> 23, 26)
¾
¾
Change the “Closed Caption Type” setting.
(> 23, 26)
Confirm the “Analog CC” or “Digital CC” is set
properly (> 23, 26).
SQT0080
31
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
I can’t play back BD-Live.
¾
¾
¾
¾
Confirm that this unit is connected to the
broadband Internet. (> 11)
Connect this unit to the network by a wired
connection.
Confirm the “BD-Live Internet Access”
settings. (> 27)
¾
¾
Confirm the “TV Aspect” is set properly.
(> 28)
Adjust the aspect setting on the TV.
Confirm a USB device is connected to the
USB port. (> 14)
Audio
Cannot switch audio.
¾
The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream”. Set “Digital
Audio Output” to “PCM”. (> 25)
Network
I can’t connect to the network.
Cannot hear the desired audio type.
¾
Confirm the network connection and settings.
(> 11, 12, 26)
¾
Check the connections and the “Digital Audio
Output” settings. (> 9, 25)
¾
There may be interference that prevents the
unit from detecting your home network. Place
the unit and the wireless router closer to each
other. This unit may be able to detect your
network name (> 13, “SSID”).
¾
[BDT460] : When connecting this unit to a TV
via an HDMI AV OUT MAIN and to an
amplifier/receiver via an HDMI AV OUT SUB,
set “HDMI(SUB) Output Mode” to “V.OFF”.
(> 10)
¾
Check the owner’s manuals for each device
and connect accordingly.
¾
To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 25)
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
There is no sound coming out from the TV.
[BDT460]
¾
Higher transfer rate router such as 802.11n
(2.4 GHz or 5 GHz) wireless router may solve
the problem. If you use 802.11n (2.4 GHz or
5 GHz) wireless router, it is necessary to set
the encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
On the “Wireless Settings” screen (> 26), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 12) again.
¾
Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (> 25) is set to “V.OFF”. In such a
case, output audio from the amplifier/receiver.
To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.
¾
Playback
Disc cannot be played.
¾
¾
¾
The disc is dirty. (> 5)
The disc is not finalized. (> 7)
Confirm the “Mixed Data Disc Option” is set
properly. (> 28)
Still pictures (JPEG) do not play back
normally.
¾
The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
SQT0080
32
SET (“ ” stands for a number.)
Messages on the screen
¾
The remote control and this unit are using
different codes. Change the code on the
remote control.
Cannot play.
¾
You inserted an incompatible disc (Discs
recorded in PAL video, etc.).
Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds.
Cannot display on this unit.
¾
You tried to play a non-compatible image.
¾
Re-insert the media.
U59
¾
Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
No disc inserted.
The disc may be upside down.
¾
Install or place this unit with good ventilation.
$ This operation is not available.
¾
Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
H or F
(“ ” stands for a number.)
¾
¾
There is something unusual.
IP address is not set.
Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
Disconnect the plug from the AC outlet, wait a
few seconds, then reconnect it.
Press [Í/I] to turn the unit on.
¾
The “IP Address” in “IP Address/DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
1
2
The current wireless network security setting
is weak. It is recommended to change to a
stronger security setting.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
¾
Set a stronger network security level referring
to the wireless router owner’s manuals.
START
¾
The system is being restarted during the
firmware update. Please do not turn off the
unit.
Messages on the unit’s
display
UPD/
(“ ” stands for a number.)
NET
¾
While connecting to a network.
¾
The firmware is being updated.
Please do not turn off the unit.
No PLAY
¾
There is a viewing restriction on a BD-Video
or DVD-Video. (> 27)
The media is dirty or badly scratched. The
unit cannot play.
FIN
¾
The firmware update is complete.
¾
REMOVE
The USB device is drawing too much power.
Remove the USB device.
¾
SQT0080
33
Specifications
File format
General
File format
Extension
Reference
≥ The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some MKV/Xvid files
may not be played back
correctly, depending on
the video resolution,
frame rate condition,
subtitle format and so
on.
“.MKV”, “.mkv”
Signal system
Operating
NTSC
Subtitles text
file
“.SRT”, “.srt”,
“.SSA”, “.ssa”,
“.ASS”, “.ass”
i5 oC to i35 oC
MKV
temperature range (i41 oF to i95 oF)
Operating humidity 10 % to 80 % RH
range
(no condensation)
“.AVI”, “.avi”
Optical digital output
(Optical terminal)
Digital audio output
Subtitles text
file
“.SRT”, “.srt”,
“.SUB”, “.sub”,
“.TXT”, “.txt”
Xvid
[For[Canada]
Output connector:
[BDT460] Type A (19 pin) 2 system
[BDT361] [BDT360] Type A (19
pin) 1 system
HDMI AV output
Some mp4/MPEG files
may not be played back
correctly, depending on
the video resolution,
frame rate condition and
so on.
mp4
(H.264+AAC)
“.MP4”, “.mov”
SD card slot
USB slot
1 system
USB2.0:1 system
“.mpg”, “.mpeg”,
“.m2ts”, “.mts”,
“.ts”
MPEG
(TS/PS)
10BASE-T/100BASE-TX
1 system
Ethernet
≥ MOTION JPEG and
Progressive JPEG are
not supported.
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
Standard Compliance:
IEEE802.11 a/b/g/n
Frequency range:
2.4 GHz/5 GHz band
“.JPG”, “.jpg”,
“.jpeg”
JPEG
Wireless LAN
Security:
WPATM/WPA2TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
This unit supports ID3
tags, but only titles, artist
names and album names
can be displayed.
MP3
“.MP3”, “.mp3”
Class I LASER Product
Wave length: 785 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the
safety protection
LASER
Specification
Maximum sampling rate:
192 kHz/24 bit
FLAC
“.FLAC”, “.flac”
“.WAV”, “.wav”
Maximum sampling rate:
192 kHz/24 bit
WAV
MPO
Power supply
AC 120 V, 60 Hz
Approx. 14 W
“.MPO”, “.mpo” 3D still picture
This unit supports ID3
Power
consumption
“.M4A”, “.m4a”,
“.AAC”, “.aac”
tags.
AAC
Power
consumption in
standby mode
Maximum sampling rate:
48 kHz/320 kbps
Approx. 0.5 W
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/355 kbps
Power consumption
in quick start standby
mode
[BDT460] Approx. 6 W
[BDT361] [BDT360] Approx. 5.5 W
WMA
“.WMA”, “.wma”
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
Approx. 415 mmk43 mmk182 mm
(Approx. 16 6/16zk1 11/16zk
7 3/16z)
Dimensions
(WkHkD)
Mass (Weight)
Approx. 1.2 kg (2.65 lbs)
≥ Specifications are subject to change without notice.
SQT0080
34
Audio
Audio codec
Audio information
Example of file extension
MP3
FLAC
AAC
.mp3
.flac
.m4a, .aac
.wma
The audio output differs depending on which
terminals are connected to the amplifier/receiver,
and the settings on the unit. (> 25, “Digital Audio
Output”)
WMA
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
Linear PCM
—
*
Only when the file is transcoded by DLNA server.
“Digital Audio Output”
Terminal
Display languages list
“Bitstream”
“PCM”
Display Language Display Language Display Language
BD-Video :
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English JPN
Japanese ARA
Chinese HIN
Korean PER
Malay IND
Arabic
7.1ch PCM*1
HDMI AV Outputs using
French CHI
Hindi
OUT*2 original audio*1 DVD-Video :
German KOR
Italian MAL
Spanish VIE
Dutch THA
Swedish POL
Norwegian CES
Danish SLK
Portuguese HUN
Russian FIN
Persian
Indonesian
Maori
Output
channel
5.1ch PCM
Vietnamese MRI
Thai BUL
Bulgarian
Romanian
Greek
Dolby Digital/
Down-mixed
Polish RUM
Czech GRE
Slovak TUR
Hungarian
OPTICAL DTS Digital
2ch PCM
SurroundTM
Turkish
Others
*1
*2
When “BD-Video Secondary Audio” is set to “On”, the
audio will be output as Dolby Digital, DTS Digital
SurroundTM or 5.1ch PCM.
When “DTS Neo:6” is set to “Cinema” or “Music”, 2ch
(2.1ch) audio can be expanded to 7ch (7.1ch) and output.
(> 25)
Finnish
Language code list
Language Code Language Code Language Code
Abkhazian:
Afar:
Afrikaans:
Albanian:
Amharic:
Arabic:
Armenian:
Assamese:
Aymara:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
7185 Rhaeto-Romance:
Supported format for DLNA
≥ File formats that are not supported by your
DLNA server cannot be played.
Video
7265
8277
8279
8285
8377
8365
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
6577 Hungarian:
6582 Icelandic:
7289 Indonesian: 7378 Scots Gaelic: 7168
6583 Interlingua:
6589 Irish:
7365 Serbian:
8382
Video
codec
H.264
MPEG-4
Advanced
Simple
Profile
(ASP)
Audio
codec
Example of
file extension
.mkv
Container
MKV
7165 Serbo-Croatian:8372
Azerbaijani: 6590 Italian:
7384 Shona:
7465 Sindhi:
7487 Singhalese: 8373
8378
8368
Bashkir:
Basque:
6665 Japanese:
6985 Javanese:
AAC
DTS®
PCM
FLAC
Vorbis
Bengali; Bangla:
Kannada:
Kashmiri:
7578 Slovak:
7583 Slovenian:
7575 Somali:
7589 Spanish:
8375
8376
8379
6983
6678
Xvid*
[For[Canada]
Bhutani:
Bihari:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
.avi
Breton:
7579 Sundanese: 8385
Bulgarian:
Burmese:
7585 Swahili:
7679 Swedish:
7665 Tagalog:
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
AVCHD
MP4
Dolby Digital
AAC
Dolby Digital
.mts
.mp4, .mov
.mpg,
Byelorussian: 6669 Latin:
H.264
Cambodian: 7577 Latvian, Lettish: 7686 Tajik:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
6765 Lingala:
7678 Tamil:
7684 Tatar:
9072 Lithuanian:
PS
TS
MPEG2
6779 Macedonian: 7775 Telugu:
Linear PCM .mpeg
7282 Malagasy:
6783 Malay:
7771 Thai:
7783 Tibetan:
MPEG2
H.264
AAC
.m2ts, .ts
Dolby Digital
6865 Malayalam: 7776 Tigrinya:
7876 Maltese:
6978 Maori:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
7778 Ukrainian:
7865 Urdu:
7869 Uzbek:
Photo
Format
JPEG
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
Example of file extension
.jpg, .jpeg
7073 Nepali:
7082 Norwegian: 7879 Vietnamese: 8673
7089 Oriya:
7982 Volapük:
8679
6789
8779
8872
7473
8979
9085
Galician:
Georgian:
German:
Greek:
Greenlandic: 7576 Punjabi:
Guarani: 7178 Quechua:
7176 Pashto, Pushto:8083 Welsh:
7565 Persian:
6869 Polish:
7065 Wolof:
8076 Xhosa:
6976 Portuguese: 8084 Yiddish:
8065 Yoruba:
8185 Zulu:
SQT0080
35
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/
Progressive” are trademarks of Panasonic Corporation and
Sony Corporation.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
Java is a registered trademark of Oracle and/or its affiliates.
(3) the software licensed under the GNU General Public License,
Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under
the GPL V2.0 and/or LGPL V2.1.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are registered trademarks, and
DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
The software categorized as (3) - (5) are distributed in the hope
that it will be useful, but WITHOUT ANY WARRANTY, without
even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Please refer to the detailed
terms and conditions thereof shown in the Player Settings menu.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
At least three (3) years from delivery of this product, Panasonic will
give to any third party who contacts us at the contact information
provided below, for a charge no more than our cost of physically
performing source code distribution, a complete machine-readable
copy of the corresponding source code covered under GPL V2.0,
LGPL V2.1 or the other licenses with the obligation to do so, as
well as the respective copyright notice thereof.
This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC
Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)
decode AVC/VC-1 Video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC/VC-1
Video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
Contact Information: [email protected]
The source code and the copyright notice are also available for
free in our website below.
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
(1) MS/WMA
This product is protected by certain intellectual property rights of
Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license
from Microsoft or an authorized Microsoft subsidiary and third
parties.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing
Corporation.
(2) MS/PlayReady/Final Product Labeling
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
This product contains technology subject to certain intellectual
property rights of Microsoft. Use or distribution of this technology
outside of this product is prohibited without the appropriate
license(s) from Microsoft.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “Miracast”, “WPA”
and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
(3) MS/PlayReady/End User Notices
Content owners use Microsoft PlayReadyTM content access
technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to
access PlayReady-protected content and/or WMDRM-protected
content. If the device fails to properly enforce restrictions on
content usage, content owners may require Microsoft to revoke the
device’s ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content
protected by other content access technologies. Content owners
may require you to upgrade PlayReady to access their content. If
you decline an upgrade, you will not be able to access content that
requires the upgrade.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
Android is a trademark of Google Inc.
(4) FLAC, WPA Supplicant
The software licenses are displayed when “License” in the Setup
menu is selected. (> 29)
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance
Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance
Corporation. All rights reserved.
SQT0080
36
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
of the product, or service by anyone other than a Factory Service Center or
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Corporation of North America (referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which
starts with the date of original purchase (“warranty period”), at its option either
(a) repair your product with new or refurbished parts, (b) replace it with a new or
a refurbished equivalent value product, or (c) refund your purchase price. The
decision to repair, replace or refund will be made by the warrantor.
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the
servicer, loss of or damage to media or images, data or other memory or
recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Product or Part Name
Parts
Labor
Blu-ray Disc Player
1 Year
90 Days
All included Accessories
(Except Non-Rechargeable Batteries)
90 Days
10 Days
Not Applicable
Not Applicable
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the exclusions may not apply to you.
Only Non-Rechargeable Batteries
During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to
the original purchaser of a new product which was not sold “as is”.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or
after the warranty period, you may contact your dealer or Service Center. If the
problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
Mail-In Service--Online Repair Request
Online Repair Request
Customer Services Directory (United States and Puerto Rico)
To submit a new repair request and for quick repair status visit our Web Site at
Obtain Product Information and Operating Assistance; locate your
nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
When shipping the unit, carefully pack, include all supplied accessories listed in
the Owner’s Manual, and send it prepaid, adequately insured and packed well in
a carton box. When shipping Lithium Ion batteries please visit our Web Site at
the most up to date information. Include a letter detailing the complaint, a return
address and provide a daytime phone number where you can be reached. A
valid registered receipt is required under the Limited Warranty.
or, contact us via the web at:
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID
AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE
REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.
Purchase Parts, Accessories and Owner’s Manual online for all Panasonic
Products by visiting our Web Site at:
Or, send your request by E-mail to:
You may also contact us directly at:
1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by the
warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, introduction of sand, humidity or liquids,
commercial use such as hotel, office, restaurant, or other business or rental use
Panasonic National Parts Center
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of November 2013
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
SQT0080
37
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
EXCHANGE PROGRAM
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use
and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product
with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Panasonic BD / DVD Player
Panasonic Streaming Player
One (1) year
One (1) year
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in
Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original
packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED.
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time,
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded
content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty
gives you specific legal rights and you may have other rights which vary depending on your province or territory.
CONTACT INFORMATION
For product operation and information assistance, please visit our Support page:
For defective product exchange within the warranty period, please contact the original dealer.
SQT0080
38
Referencia rápida en español
(Spanish Quick Reference)
Reproducción básica
Preparación
Encienda el televisor y seleccione la entrada de
vídeo adecuada en el televisor.
Conexiones básicas
Conexión a un televisor
compatible con HDMI
1 Pulse [Í] para encender la unidad.
Después de conectar su nuevo reprodutor y
pulsar el botón de encendido, aparecerá la
pantalla de la configuración básica.
[BDT361]
[BDT360]
[BDT460]
Cable HDMI
2 Inserte el medio.
HDMI IN
Inicia la reproducción
Pulse [1PLAY].
Parada
Conexión a un televisor
Pulse [∫STOP].
La posición de detención se memoriza.
compatible con HDMI y a un
amplificador/receptor
compatible con HDMI
Función de reanudación de la reproducción
Pulse
[1PLAY] para reiniciar la reproducción
desde esta posición.
≥ La posición se borra si se abre la bandeja.
Cable HDMI
≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
HDMI IN
[BDT361]
(ARC)
[BDT460] [BDT360]
Pausa
Pulse [;PAUSE].
≥ Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la
reproducción.
HDMI OUT
(ARC)
HDMI IN
Búsqueda/Cámara lenta
Búsqueda
Durante la reproducción, pulse [SEARCH6]
o [SEARCH5].
Amplificador/Receptor
Cámara lenta
Conecte el cable de
alimentación de CA por
último
Durante la pausa, pulse [SEARCH5].
La velocidad aumenta hasta 5 pasos.
≥ Música y MP3, etc.: La velocidad está fija en un paso.
≥ Pulse [1PLAY] para recuperar la velocidad de
reproducción normal.
A una toma de corriente doméstica
Salto
Durante la reproducción o la pausa, pulse
[:] o [9].
Salta hasta el título, capítulo o pista que desee
reproducir.
Cable de alimentación de CA (incluido)
≥ Conéctelo cuando haya realizado el resto de conexiones.
Ahorro de energía
Esta unidad consume una pequeña cantidad de energía
aunque esté ajustada en el modo de espera (Accionamiento
rápido : Desactivado, aprox. 0,5 W). Para ahorrar energía
cuando no vaya a utilizar la unidad durante mucho tiempo,
desenchúfela de la toma de corriente.
SQT0080
39
Index
A Audio
Language
P
Pop-up menu . . . . . . . . . . 17
Changing audio . . . . . .17
Audio . . . . . . . . . . . . . 26
Menu. . . . . . . . . . . . . . 26
On-screen. . . . . . . . . . 26
Soundtrack . . . . . . . . . 22
Subtitle . . . . . . . . . 22, 26
Q Quick Start . . . . . . . . . . 28
R Repeat play . . . . . . . . . . 22
Language . . . . . . . .26, 35
B BD-Live . . . . . . . . . . . . . .18
C Closed Caption. . . . .23, 26
D DLNA . . . . . . . . . . . . . . . .20
DMC . . . . . . . . . . . . . . . . . 21
F File format. . . . . . . . . . . .34
Firmware update . . . . . . . 13
H HDMI CEC . . . . . . . . . . . .22
L LAN . . . . . . . . . . . . . . . . .11
Restore Default
Settings . . . . . . . . . . . . . . 29
Resume play function . . . 17
S Subtitle . . . . . . . . . . . . . 22
U USB device . . . . . . . . . . . 7
W Wireless LAN . . . . . . . . 11
M Media Renderer . . . . . . 21
Miracast . . . . . . . . . . . . . 20
Multi User Mode. . . . . . . 16
N Network
Connection . . . . . . . . . 11
Setting . . . . . . . . . 12, 26
24p . . . . . . . . . . . . . . . 23, 24
Network Service . . . . . . .19
USA Only: Disposal may be regulated in your community due to environmental considerations. For
disposal or recycling information, please visit Panasonic website:
or call 1-888-769-0149.
As an ENERGY STAR® Partner, Panasonic
has determined that this product meets the
ENERGY STAR® guidelines for energy
efficiency.
For Canada only: The word “Participant” is
used in place of the word “Partner”.
Panasonic Corporation of North
America
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario,
L4W 2T3
pr
Two Riverfront Plaza, Newark, NJ
07102-5490
SQT0080
F1213SK0
C Panasonic Corporation 2013
Printed in China
|