Palsonic CD Player PDM 103 User Manual

IMPORTANCE NOTICE  
1
2
This product does not contain a separate Power On/Off switch. After inserting a disc and  
installing batteries/AC adaptor, simply press the Play button to switch on and ply disc.  
In order to maximise battery life and provide optimum playing time this product incorporates  
an Auto Power Off Function. The power to the player will automatically switch off approxi-  
mately 30 seconds after a disc has finished playing or when the CD lid is opened.  
PDM-103  
Compact Disc Player  
Instruction Manual  
TABLE OF CONTENTS  
SAFETY PRECAUTIONS  
1. As the laser beam used in this compact  
disc player is harmful to the eyes, do not  
attempt to disassemble the casing.  
2. Stop operation immediately if any liquid  
or solid object should fall into the cabinet.  
Unplug the unit and have it checked by  
qualified personnel.  
1
2
3
4
5
6
Power Sources-Normal Batteries/AC adaptor ......  
Charging and Use of Rechargeable Batteries ....  
Earphone and Hi-Fi Connection .........................  
Player Maintenance ............................................  
Disc Cleaning and Troubleshooting Guide .........  
Product Specifications ........................................  
3. Do not touch the lens or poke at it. If  
you do, you may damage the lens and the  
player may not operate properly.  
4. Do not put anything in the safety slot. If  
you do, the laser diode will be ON when  
the lid is still opened.  
5. If the unit is not to be used for a long  
period of time, make sure that all power  
sources are disconnected from the unit.  
Remove all batteries from the battery  
compartment, and unplug the AC adaptor  
from the wall outlet. Make it a practice to  
remove the AC adaptor by grasping the  
main body and not by pulling the cord.  
6. The unit employs a laser. The use of  
controls or adjustments or performance  
of procedures other than those specified  
herein may result in exposure to  
Player Operation  
Basic Disc Play ..............................................  
LCD Display Information ................................ 8  
Repeat/Play Modes ........................................  
Intro Scan and Random Play ......................... 10  
Programmed Track Play................................. 11  
Location of Controls ....................................... 12  
Skip and Search Functions ............................ 13  
7
9
SPECIFICATIONS  
Dimensions: 136 mm (W) x 30 mm (H) x 150 mm (L)  
Weight: 250g (without batteries)  
Program Play: Up 20 memory  
Line output: 0.6V +/- 0.2V  
Earphone: 16mW  
WARNING  
Power requirements: DC 4.5V external and Battery, 3V "AA"  
Cell x 2 (LR6, MN1500 or Ni-Cad rechargeable battery)  
To prevent a shock hazard, do not expose  
the unit to rain a moisture.  
* For improvement purposes, specification and design are subject to change without notice  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111 FAX: (02) 9313 7555  
To avoid electrical shock, do not open the cabinet.  
Refer servicing to qualified personnel only.  
hazardous radiation.  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
2
1
1. POWER SOURCE NORMAL BATTERIES/AC ADAPTOR  
2. CHARGING AND USE OF RECHARGEABLE BATTERIES  
AC Operation  
Battery Power Operation  
Rechargeable Battery Operation  
This unit can fully recharge the specified rechargeable battery, in approximately 15 hours The  
rechargeable batteries (NOT suppled) should be recharged before they are used for the first time  
because they are low in power or if they have not been used for a long period (over 60 days).  
1. Open the battery compartment cover and  
insert two "AA" alkaline batteries inside the  
battery compartment. Follow the polarity as  
indicated in the battery compartment.  
1. Insert the DC plug, at the end of the AC  
adaptor cord into the DC input jack, on the  
side of the unit.  
Open the battery compartment cover and insert two of the recommended rechargeable  
batteries, matching polarity (12V 650mA).  
1.  
2. Plug the AC adaptor into a 230V AC  
power outlet socket.  
2. Close the battery compartment cover.  
BOTH BATTERIES MUST BE OF RECHARGEABLE NICKEL-CADMIUM TYPE,  
OTHERWISE THE BATTERIES MAY EXPLODE OR LEAK.  
Note  
Note: Zinc/Carbon, or Zinc/Chloride type  
batteries are not recommended for this unit  
as their use will result in extremely short  
playing times. Wherever possible and for  
economy it is recommended that the mains  
adaptor supplied with this unit is used.  
If the AC plug of this unit does not fit in your  
AC outlet, a plug adaptor (not included) should  
be used.  
Consult your local dealer on the type of plug  
adaptor required.  
RECHARGE SWITCH  
2. Plug in the AC adaptor and set the Recharge switch to ON position to start charging and  
Recharge indicator will light on.  
USE ONLY THE AC ADAPTOR SUPPLIED WITH THE SET FOR CHARGING.  
3. After 15 hours. Please unplug the AC adaptor and switch the Recharge switch to the off position  
DO NOT CHARGE CONTINUOUSLY FOR 24 HOURS OR MORE. DOING SO CAN CAUSE  
THE PERFORMANCE OF THE RECHARGEABLE BATTERY TO DETERIORATE.  
Note  
You may play DISC'S whilst charging the batteries.  
4. If the operating time decreases drastically when when the rechargeable nickel-cadmium batteries  
are properly recharged, purchase a new set of rechargeable nickel-cadmium batteries.  
5. When charging for the first time or after a long time, playing time may be reduced. In this  
case, charge and discharge the batteries several times.  
4
3
 
7. BASIC DISC PLAY  
8. LCD DISPLAY INFORMATION  
1. Connect the earphone to the PHONES  
socket.  
2. Press the OPEN button to open the CD  
compartment lid.  
When the || is pressed  
The total number of tracks and total playing time in the  
disc will be displayed after 2 seconds.  
3. Adjust the VOLUME to minimum.  
4. Insert the disc with the label side Facing  
up.  
5. Close the lid securely until a click is heard.  
6. Press the PLAY button to start playing.  
During PLAY mode  
The total number of tracks on the disc are played  
To Emphasise the bass sound  
Set the BASS BOOST switch to the ON  
position.  
BASS BOOST  
ON  
OFF  
During PAUSE mode  
The track playback is paused, the elapsed time is flashing.  
Note  
The bass boost performance will be  
dependent on the VOLUME control setting.  
Turning Power on and off  
Remove the Disc  
This unit has no ON/OFF switch. To turn on  
and off, press the following buttons.  
Hold the edge and gently press the centre  
pivot as illustrated, the pick up the disc,  
To turn on:  
Press || PLAY/PAUSE (playback  
starts).  
Press  
standby mode.  
STOP button once to  
To turn off:  
Note  
Press  
will turn off the power  
immediately.  
STOP button twice, it  
A flashing  
indication appears on the display when the batteries need to be changed.  
Auto Power-off function  
CAUTION:  
Then the unit is stopped (standby mode) for  
approximately 30 seconds, the power is  
automatically turned off.  
Wait for the disc to stop rotating before pressing  
the OPEN button.  
Note  
HOLD OPERATION  
This unit can play 3" (8cm) single CD's without  
an adaptor. Do not use a CD single adaptor for  
these discs.  
During the playback, turn HOLD switch "ON  
to avoid any interruption whilst press CD  
control button.  
10  
9
9. REPEAT/PLAY MODES  
10. INTRO SCAN AND RANDOM PLAY  
During the play  
Every time the MODE button is pressed.  
The corresponding mode appears in the display window.  
INTRO SCAN  
Press mode button to select intro scan play.  
x3  
MODE  
MODE  
MODE  
MODE  
MODE  
CD player now is ready to play the first 10 seconds of each track on the disc  
NORMAL  
REPEAT 1  
REPEAT ALL  
Press || to start playing "INTRO" scan.  
During the play  
X1  
PLAY/PAUSE  
INTRO  
SHUFFLE  
SHUFFLE  
NORMAL PLAYBACK  
Enables all the tracks on a disc to be played in a Random sequence.  
Play the whole disc.  
During playback SHUFF indicator will show on the display and disc will play in random order  
after the current track had been played.  
For example : If "SHUFFLE" is selected whilst playing track 8, the random function.  
will commence once track 8 has ended.  
When all tracks on a disc have been played, the player will automatically stop and power  
down in approx. 30 seconds to preserve battery life.  
During the play  
1
Shown on the LCD display. The current  
track on the disc will be repeated.  
MODE  
X1  
During the play  
ALL  
During the play  
Shown on the LCD display. All  
tracks on the disc will be repeated.  
MODE  
X4  
X2  
MODE  
Press MODE button twice to return to NORMAL play mode  
Note: In normal modes none of the above symbol show in the display.  
12  
11  
 
12. LOCATION OF CONTROLS  
11. PROGRAMMED TRACK PLAY  
DISC COMPARTMENT LID  
PROGRAMME  
DISPLAY  
This allows selected tracks on the disc to be played in any desired order.  
PROGRAM  
CD MODE  
STOP BUTTON  
To set the programme play  
* programmes can be set in the STOP mode or  
normal play mode.  
SKIP/SEARCH  
BUTTON  
1. Press the PROGRAM button when the unit is in the  
PRG  
stop mode a normal play mode until  
shows on  
the display.  
PLAY/PAUSE  
BUTTON  
PRG  
*
The track number and  
appear on the display.  
indicator flashing  
2.  
3.  
Press |  
or  
| to select the desired track.  
Press the REPEAT button to enter the track into  
memory. Programme No. will be increment one  
step.  
OPEN BUTTON  
CHARGE  
INDICATOR  
4.  
Repeat step 2 and 3 to program the order of more  
tracks up to 20 tracks can be programmed into  
memory.  
PROGRAM  
INDICATOR  
REPEAT  
BATTERY  
INDICATOR  
INDICATOR  
5.  
6.  
Press  
|| to start the programme play.  
To erase the programme, simply press the  
button twice.  
STOP  
RANDOM  
INDICATOR  
PLAYTIME  
TRACK  
DISPLAY  
INTRO  
INDICATOR  
EARPHONE SOCKET  
BASS BOOST SWITCH  
VOLUME CONTROL  
LINE OUT SOCKET  
HOLD/OFF/CHARGE  
DC SOCKET  
14  
13  
13. SKIP AND SEARCH FUNCTIONS  
Locating a Particular track  
To go back to the beginning of the current  
or a previous track  
Press |  
lightly and repeatedly  
To go to the beginning of following tracks  
Press  
| lightly and repeatedly  
Locating a Particular Point in a track  
Keep |  
depressed  
To search at a high speed  
To search forward at a high speed  
Keep  
| depressed  
Low level audio will be heard during the search process to assist in locating the correct point in the track  
15  
580-318N01-015  
 

Multiquip Tablet Accessory wrs5200 User Manual
NeumannBerlin Electric Pressure Cooker D1761 User Manual
Nintendo Video Games 45496902841 User Manual
Olympus Camera Lens 261502 User Manual
Onkyo Stereo Receiver HT R494 User Manual
Oregon Scientific Clock BAR332ES User Manual
Palsonic Digital Photo Frame DPF8128 User Manual
Panasonic CRT Television CT 2701 User Manual
Panasonic Laptop CF 35 User Manual
Panasonic Washer Dryer FK3300 User Manual