Firmware Upgrade Procedure
for the Optoma HD80
Home Theater Projector
05.04.07
Firmware Upgrade Procedure
Optoma HD80
Step 5
Select “appcode.hex” and then click
“Flash”to execute the firmware upgrade
Step 6
When the words “Waiting for target reset” appear on the screen, plug in the power
cord to the HD80.
Step 7
While the firmware is upgrading, you will
see the words “Downloading: Appcode.
hex” on the screen.
Firmware Upgrade Procedure
Optoma HD80
Step 8
When the firmware upgrade program
has completed, you will see the following
displayed on the screen
Step 9
Disconnect the RS-232 cable and the power cord. The HD80 is now ready to
be placed back in your home theater environment.
|