Oki All in One Printer 18 24DXE 2 User Manual

Warranty,  
RegulatoryInformation,  
and Specifications  
 
Overview  
Contents  
Year 2000 Compliance ................................................... 4  
Energy Star ..................................................................... 4  
Limited Warranty.................................................... 5  
Limited Warranty—United States and Canada .............. 5  
Limited Warranty—Latin America ................................. 7  
Okidata Depot Service Centers ............................. 8  
Authorized Service Providers ......................................... 9  
Important Safety Information ............................. 10  
Regulatory Information ....................................... 12  
Specifications .......................................................... 15  
Material Safety Data Sheet .................................. 16  
Warranty, Regulatory Information, and Specifications  
 
E-3  
|
Year 2000 Compliance  
Energy Star  
All products currently sold by Okidata are Year 2000  
Compliant. Each product contains information technology  
that accurately processes date and time data between the  
years 1999 and 2000, and carries no issue for the September  
9, 1999 (9999) programming concern. These products, when  
used in combination with products purchased from other  
manufacturers, whose products properly exchange data and  
time information, will accurately process the date and time.  
All future products are committed to meeting the same Year  
2000 compliance.  
As an Energy Star® Partner, Okidata has determined that this  
product meets the Energy Star guidelines for energy  
efficiency.  
OKIPAGE 18/ 24DX  
E-4  
|
 
Consumables are covered separately under individual  
consumable warranties. Please refer to the appropriate  
consumable item’s warranty for further information.  
Limited Warranty  
Overview  
Limited WarrantyUnited States and  
Canada  
On-Site Repair  
On-Site Repair is available in the United States and  
!
Canada only. On-Site Repair does not include the  
replacement or repair of product consumables or  
supplies.  
Okidata, division of Oki America, Inc. (Okidata) warrants this  
printer to be free from defect in material and workmanship  
and will remedy any such defect according to the terms of  
this Limited Warranty. This Limited Warranty extends to the  
original purchaser only. This Limited Warranty does not  
extend to network setup, application conflicts, or  
Okidata will, for a period of one (1) year from the date of  
purchase, repair (or replace at its option) on-site at the  
original purchaser’s facility within a sixty (60) mile [100  
kilometers] radius of an Authorized Service Center and  
without charge, any defective component(s) of the printer,  
provided that this warranty service is performed by an  
authorized Okidata service center or authorized third-party  
service organization. The printhead (LED imaging array) has  
a five (5) year parts warranty from date of purchase. On-site  
replacement of the printhead is limited to one year from date  
of purchase. For the remaining printhead warranty period,  
replacement will be at an authorized service center or  
authorized third party service organization.  
consumable items including, but not limited to, image drum  
cartridges, toner cartridges, fuses, etc.  
Okidata will repair (or at its option, replace) at no charge, any  
defective component(s) of the Printer for one (1) year from  
the date of purchase except for the printhead (LED imaging  
array), which is warranted for a period of five (5) years from  
date of purchase. This Limited Warranty extends to the  
original purchaser only. This Limited Warranty does not  
extend to consumable items.  
Warranty, Regulatory Information, and Specifications  
 
E-5  
|
To make request or claim for service under this Limited  
Warranty, contact your Okidata Authorized Dealer,  
authorized third-party service provider, or Okidata.  
THE RESPECTIVE WARRANTYPERIOD DESCRIBED  
ABOVE. Some states do not allow limitations on how long  
an implied warranty lasts, so the above limitation may not  
apply to you.  
Okidata will attempt to fix the problem over the telephone  
prior to scheduling an on-site visit. It will be the  
responsibility of the owner to install any warranty  
replacement consumable (drum or toner) or other end user  
replaceable item as supplied by Okidata.  
OKIDATASHALLNOT BE RESPONSIBLE OR LIABLE FOR  
ANYSPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES OR LOSSARISING FROMTHE USE OF THIS  
PRODUCT. Some states do not allow the exclusion or  
limitation of incidental or consequential damages, so the  
above limitation may not apply to you.  
A written receipt for the product, showing the date of  
purchase, place of purchase, and both the model and serial  
numbers of this printer must accompany any request or claim  
for work to be performed under this Limited Warranty. In the  
event a service request is verified by Okidata over the phone,  
a mailed or faxed copy of the written purchase receipt is  
required to verify in-warranty coverage prior to scheduling  
an on-site repair.  
Additional information on obtaining service under this  
Limited Warranty is available by contacting the OKIDATA  
dealer from whom the product was purchased, by contacting  
Okidata directly at 1-800-654-3282 (1-800-OKIDATA,  
United States and Canada, English only), or 1-609-222-5276  
(Spanish only), or by contacting one of the listed service  
locations.  
This Limited Warranty shall not apply if the product has been  
damaged due to abuse, misuse, misapplication, accident, or  
as a result of service or modification by any other than an  
authorized Okidata service center.  
This Limited Warranty applies to this Okidata printer.  
However, the procedure for obtaining service may vary  
outside of the continental United States. Contact your  
Okidata dealer for such warranty service information.  
THEREARE NO EXPRESSWARRANTIES OTHER THAN  
THOSE ON THE FACE HEREOFAND DESCRIBEDABOVE.  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO,ANYIMPLIED  
WARRANTIES OF MERCHANTABILITYOR FITNESS FOR  
APARTICULAR PURPOSE, SHALLEXTEND BEYOND  
This warranty gives you specific legal rights and you may  
also have other rights, which vary from state to state.  
OKIPAGE 18/ 24DX  
E-6  
|
 
Limited WarrantyLatin America  
Okidata, division of Oki America, Inc. (Okidata) warrants this  
printer to be free from defect in material and workmanship  
and will remedy any such defect according to the terms of  
this Limited Warranty. This Limited Warranty does not  
extend to network setup, application conflicts, or  
consumable items including, but not limited to, image drum  
cartridges, toner cartridges, fuses, etc.  
To make a request or claim for service under this Limited  
Warranty, the original purchaser must return the Oki Data  
Product to Oki Data or an authorized Oki Data service center  
within the country purchased. The purchaser returning the  
product for repair must pay for all transportation charges to  
the repair center. A written receipt for the Product, showing  
the date of purchase, dealer’s name, and both the model and  
serial numbers of the Oki Data Product must accompany any  
request or claim for work to be performed under this Limited  
Warranty.  
Consumables are covered separately under individual  
consumable warranties. Please refer to the appropriate  
consumable item’s warranty for further information.  
Okidata will repair (or at its option, replace) at no charge, any  
defective component(s) of the Printer for one (1) year from  
the date of purchase except for the printhead (LED imaging  
array), which is warranted for a period of five (5) years from  
date of purchase. This Limited Warranty extends to the  
original purchaser only.  
This Limited Warranty shall not apply if the product has been  
damaged due to abuse, misuse, misapplication, accident, or  
as a result of service or modification by any other than an  
authorized Okidata service center.  
THEREARE NO EXPRESS WARRANTIES OTHER THAN  
THOSE ON THE FACE HEREOFAND DESCRIBEDABOVE.  
NO WARRANTIES EXPRESS ORAPPLIED, INCLUDING,  
BUTNOTLIMITED TO,ANYPARTICULAR PURPOSE,  
SHALL EXTEND BEYOND THE RESPECTIVE  
WARRANTYPERIODABOVE OF ONE (1)YEAR.  
Warranty, Regulatory Information, and Specifications  
 
E-7  
|
Okidata Depot  
Overview  
Service Centers  
Argentina  
Megatech  
Lavalle 1524  
1048 Buenos Aires, Argentina  
Phone/Fax:(541) 371-4123  
[Touch-Tone required]  
United States  
Okidata  
2020 Bishops Gate Blvd.  
Mt. Laurel, NJ 08054  
Brazil  
Phone: 800-654-3282  
Fax: 609-222-5247 (U.S./Canada)  
609-222-5260 (Latin America)  
Oki Data do Brasil, Ltda.  
Av. Leonardo da Vinci, 1178/1182  
Jabaquara  
Sao Paulo, Brazil  
Phone: 55-11-5011-1518  
Fax: 55-11-5012-0267  
Canada  
Okidata  
2735 Matheson Blvd. East, Unit 1  
Mississauga, Ontario  
Canada L4W 4M8  
Phone: 800-654-3282  
Fax: 905-238-4427  
Chile  
Teknos Comunicaciones  
Santa Elena 2222  
Santiago, Chile  
Phone: 56 (2) 555-5530  
Fax: 56 (2) 550-2399  
OKIPAGE 18/ 24DX  
E-8  
|
 
Colombia  
Venezuela  
Impact  
Intercal Servicios C.A.  
RIF: J-30406985-5  
3a Transveral de Los Ruices Norte  
Edificio Canada, PB, Local Calle  
Caracas, Venezuela  
Calle 93 Bis No 19-50 Ofic 103-105  
Bogota, Colombia  
Phone: 571-616-1385  
Fax: 571-616-1386  
Phone/Fax: 582-232-2290  
Mexico  
Authorized Service Providers  
Oki Data de Mexico, S.A. de C.V.  
Av. Insurgentes 1700 – 7 Piso  
Col. Florida 01030  
Phone: (525) 661-6860  
Fax: (525) 661-5861  
OKIDATA has over 2,000 local Authorized Service Providers  
in North and South America.  
For the most comprehensive, up-to-date listing of Okidata  
authorized Service Centers:  
Peru  
Teknos Comunicaciones  
Los Sauces 325  
• Consult our web site at www.okidata.com  
• In the U.S. and Canada, call 1-800-654-3282  
(1-800-OKIDATA)  
San Isidro, Lima 27, Peru  
Phone: 511-222-1818  
Fax: 511-221-5404  
• In Latin America, contact the Latin America Service  
Coordinator at Okidata’s Corporate Headquarters at  
609-222-5276 (Spanish only).  
Warranty, Regulatory Information, and Specifications  
 
E-9  
|
• Protect your printer from overheating. Make sure no  
obstructions block the openings of the printer. Do not put  
the printer on or near a heat source (such as a radiator or  
heat register). Keep the printer out of direct sunlight.  
Allow enough room around the printer for adequate  
ventilation and easy access to the paper trays. If you put  
the printer in any kind of enclosure, make sure the  
enclosure is properly ventilated.  
• Do not use your printer near water. Do not spill liquid of  
any kind into it.  
• Be certain that your power source matches the rating listed  
on the back of the printer. If you are not sure, check with  
your dealer or with your local power company.  
Your printer has a grounded, three-prong plug as a safety  
feature. This plug only fits into a grounded outlet. If the  
plug does not fit, the outlet may be an older, non-  
grounded type. Contact an electrician to have the outlet  
replaced. Do not use an adapter to defeat the grounding.  
• Install the printer near an easily accessed power outlet.  
• Avoid damaging the power cord. Do not put anything on  
it or place it where it will be walked on. If the cord  
becomes damaged or frayed, replace it immediately.  
Important Safety  
Overview  
Information  
Your Okidata printer has been carefully designed to give you  
years of safe, reliable performance. As with all electrical  
equipment, there are a few basic precautions you should take  
to avoid hurting yourself or damaging the printer.  
• Carefully read the provided setup and operating  
instructions.  
• Save all provided documentation for future reference.  
• Read and follow all warning and instruction labels on the  
printer itself.  
• Unplug the printer before you clean it. Use only a damp  
cloth; do not use liquid or aerosol cleaners.  
• Place your printer on a firm, solid surface. If you put it on  
something unsteady, it may fall and be damaged. If you  
place it on a soft surface, such as a rug, sofa, or cushion,  
the vents may be blocked, causing the printer to overheat.  
OKIPAGE 18/ 24DX  
E-10  
|
 
• If you are using an extension cord or power strip with the  
printer, make sure that the total of the amperes required by  
all the equipment on the extension is less than the  
extension’s rating. The total ratings of all equipment  
plugged into the outlet should not exceed 15 amperes.  
• Do not poke anything into the ventilation slots of the  
printer. You could get an electrical shock or cause  
hazardous electrical arcing, which could cause a fire.  
• Aside from the routine maintenance described in the  
documentation, do not try to service the printer yourself.  
Removing the cover may expose you to shocks or other  
hazards.  
If anything happens that indicates that your printer is not  
working properly or has been damaged, unplug it  
immediately and follow the procedures in the provided  
documentation for having your printer serviced.  
Here are some of the things to look for.  
• The power cord or plug is frayed or damaged.  
• Liquid has been spilled into the printer, or the printer has  
been exposed to water.  
• The printer has been dropped, or the cabinet is damaged.  
• The printer does not function normally when you are  
following the operating instructions.  
• Do not make any adjustments other than those outlined in  
the documentation. You may cause damage that will  
require extensive repair work. The provided  
documentation explains how to get your printer serviced  
by qualified Okidata technicians.  
Warranty, Regulatory Information, and Specifications  
 
E-11  
|
Regulatory  
Overview  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more  
of the following measures:  
Information  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and the  
receiver.  
• Plug the unit into an outlet on a circuit different from that  
to which the receiver is connected.  
Federal Communications  
Commission Radio Frequency  
Interference Statement for 120-Volt  
Models  
• Consult the dealer or an experienced radio/television  
technician for help.  
WARNING: This equipment has been tested and found to  
comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC rules. These limits are designed to  
provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause  
harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be  
It is the responsibility of the user to obtain the required  
shielded cable in order to ensure compliance of this  
equipment with FCC regulations.  
Changes or modifications not expressly approved by  
OKIDATA may void your authority to operate this device.  
Industry Canada Radio Interference  
Statement for 120-Volt Models  
This OKIDATA apparatus complies with the Class B limits for  
radio interference as specified in the Industry Canada Radio  
Interference Regulations.  
OKIPAGE 18/ 24DX  
E-12  
|
 
Federal Communications  
Commission Radio Frequency  
Interference Statement for 230/ 240-  
Volt Models  
Industry Canada Radio Interference  
Statement for 230/ 240-Volt Models  
This OKIDATA apparatus complies with the Class A limits for  
radio interference as specified in the Industry Canada Radio  
Interference Regulations.  
WARNING: This equipment has been tested and found to  
comply with the limits for a Class A digital device, pursuant  
to Part 15 of the FCC rules. These limits are designed to  
provide reasonable protection against harmful interference in  
a commercial environment. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause  
harmful interference to radio communications. Operation of  
this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct  
the interference at his own expense.  
European Union Council of the  
European Communities Statements  
of Electromagnetic Conformance for  
230/ 240-Volt Models  
This product complies with the requirements of the council  
Directive 89/336/EEC on the approximation of the laws of  
the member states relating to electromagnetic compatibility.  
European Union Council of the  
European Communities Statement of  
Safety Conformance for 230/ 240-  
Volt Models  
It is the responsibility of the user to obtain the required  
shielded cable in order to ensure compliance of this  
equipment with FCC regulations.  
Changes or modifications not expressly approved by  
OKIDATA may void your authority to operate this device.  
This product is in conformity with Directive 73/23/EEC on  
the harmonization of the laws of Member States relating to  
electrical equipment designed for use within certain voltage  
limits.  
Warranty, Regulatory Information, and Specifications  
 
E-13  
|
Federal Communications  
Federal Communications  
Commission Declaration of  
Conformity for 120 Volt Models  
Commission Declaration of  
Conformity for 120 Volt Models  
1. Product Identification  
OKIPAGE 18, model N22002A  
2. Statement  
1. Product Identification  
OKIPAGE 24DX, model N22001A  
2. Statement  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received,  
including interference that may cause undesired  
operation.  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received,  
including interference that may cause undesired  
operation.  
3. Responsible Party  
3. Responsible Party  
Okidata, Division of Oki America Inc.  
2000 Bishops Gate Boulevard  
Mt. Laurel, NJ 08054-4620  
Okidata, Division of Oki America Inc.  
2000 Bishops Gate Boulevard  
Mt. Laurel, NJ 08054-4620  
1-800-654-3282 (1-800-OKIDATA)  
1-800-654-3282 (1-800-OKIDATA)  
OKIPAGE 18/ 24DX  
E-14  
|
 
Environmental  
Temperature  
Specifications  
Overview  
For additional specifications (including General, Physical,  
Interface, Print Media, Fonts, and Commands) refer to the  
Handbook.  
Operating  
50 to 90° F  
10 to 32° C  
Power Off  
32 to 110° F  
0 to 43° C  
Storage (Packed)  
Electrical  
14 to 110° F  
-10 to 43° C  
Voltage  
120 V: 120 VAC +10%, -14%  
230 V: 230VAC +/- 10%  
Humidity  
Operating  
Frequency  
50/60 Hz +/- 2%  
20 to 80% Relative Humidity  
Power Off  
10 to 90% Relative Humidity  
Storage (Packed)  
Power  
Idle:  
Approximately 95 Watts  
Approximately 350 Watts  
Approximately 820 Watts  
Approximately 25 Watts  
Operating:  
Peak:  
10 to 90% Relative Humidity  
Power Save Mode:  
Warranty, Regulatory Information, and Specifications  
 
E-15  
|
Emergency First Aid Procedures  
Material Safety Data  
Overview  
Toner swallowed (ingested)  
Sheet  
Dilute by giving two glasses of water and induce vomiting  
by administering Syrup of Ipecac (follow manufacturer’s  
instructions). Seek medical attention. NEVER give anything  
by mouth or attempt to induce vomiting in a person who is  
unconscious.  
Type 7 Toner, P/ N 40468801  
MSDS # 58328701  
For more information, contact Okidata at:  
Toner inhaled  
Remove person to fresh air. Seek medical attention.  
2000 Bishops Gate Boulevard  
Mount Laurel, NJ 08054-4620  
Toner gets in the eyes  
Flush eyes with large quantities of cool water for 15 minutes,  
keeping the eyelids open with fingers. Seek medical  
attention.  
Emergency Information  
Call 1-800-654-3282 (1-800-OKIDATA)  
Small amounts of toner on skin or clothing can easily  
!
be removed with soap and cold water. Hot water makes  
toner harder to remove.  
Current as of July 1, 1999  
OKIPAGE 18/ 24DX  
E-16  
|
 
Hazardous Ingredients  
Physical Data  
Melting Point: 110°C (230°F)  
Styrene-Butyl Acrylate Copolymer (91% by weight)  
CAS# 25767-47-9  
Boiling Point: Not applicable  
Vapor Pressure: Not applicable  
Vapor Density (Air=1): Not applicable  
Evaporation Rate (Butyl Acetate=1): Not applicable  
Specific Gravity (H2O=1): 1.15  
Solubility in water: Negligible  
OSHA TWA 15 mg/m3 for total dust  
ACGIH TLV 10 mg/m3 for total dust  
Carbon Black (5-7% by weight)  
CAS# 1333-86-4  
OSHATWA3.5 mg/m3  
ACGIH TLV 3.5 mg/m3  
Appearance and odor: Black granules, no odor  
Paraffin Wax (less than 3% by weight)  
CAS# 8002-74-2  
OSHATWA 2 mg/m3 for total dust  
ACGIH TLV 2 mg/m3 for total dust  
Amorphous Fumed Silica (less than 1% by weight)  
CAS# 67762-90-7  
OSHA PEL 15.0 mg/m3 for total dust  
ACGIH TLV 10.0 mg/m3 for total dust  
This product is not regulated under Section 313 of  
!
SARA, Title III.  
Warranty, Regulatory Information, and Specifications  
 
E-17  
|
Fire and Explosion Hazard Data  
Flash Point (Method Used): Not applicable  
Health Hazard Data  
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.  
1 Styrene-ButylAcrylate Copolymer  
Flammable Limits  
Lower Explosive Limit: Not applicable  
Upper Explosive Limit: Not applicable  
Extinguishing Media: Water, CO2, Dry Chemical, or Foam  
Subcutaneous implantation of polymeric styrene powder  
in rats has induced tumors at the site of implantation.  
2 Carbon Black  
Special Fire Fighting Procedures: Do not use methods that  
may create a dust cloud, such as high-pressure water and/or  
steam  
Group 2B “Possible Carcinogen”; IARC  
Overexposure to carbon black is associated with causing  
irritation, conjunctivitis, and corneal hypoplasia of the  
eyes; minor irritation and eczema of the skin; and irritation  
and bronchitis. Long-term inhalation exposure may be  
associated with causing lung cancer.  
Unusual Fire and Explosion Hazards  
• Organic components decompose at 200-455°C (392-  
851°F).  
• Material may explosively combust when finely suspended  
in air.  
3 Paraffin Wax  
• Thermal decomposition of organic components may result  
in release of oxides of carbon and nitrogen.  
Group 3 “Not Classifiable”; IARC  
May cause eye, skin, respiratory, and digestive tract  
irritation. Paraffin is an equivocal tumorgenic agent by  
RTECS criteria.  
4 Amorphous Fumed Silica  
Group 3 “Not Classifiable”; IARC  
Overexposure to amorphous silica has been associated  
with causing irritation of the lungs and pneumoconiosis.  
Long-term inhalation exposure may be associated with  
producing tumors in laboratory animals.  
OKIPAGE 18/ 24DX  
E-18  
|
 
Reactivity Data  
Spill Cleanup and Disposal  
Stability: Stable  
Spill Cleanup  
Small Spills  
Polymerization: Will not occur.  
Hazardous Decomposition Products: Thermal  
decomposition may result in release of oxides of carbon  
and nitrogen.  
1 Remove sources of ignition.  
2 Clean up spill with wet cloth.  
Large Spills  
Temperature: Do not expose to temperatures above 200°C  
(392°F).  
1 Remove sources of ignition.  
Incompatibility: Avoid exposure to strong oxidizers.  
2 Wear protective gear: respirator, rubber gloves, goggles  
(see below)  
3 Clean up spill with scoop, being careful not to generate a  
lot of dust.  
Waste Disposal  
Follow appropriate federal, state and local regulations.  
Warranty, Regulatory Information, and Specifications  
 
E-19  
|
Safe Handling and Use  
The information contained in this MSDS is based on data  
considered accurate; however, no warranty is expressed or  
implied regarding the accuracy of these data or the results to  
be obtained from the use thereof. Vendor assumes no  
responsibility for injury to vendee or third person party  
proximately caused by the product if reasonable safety  
procedures are not adhered to as stipulated in the MSDS.  
Furthermore, vendor assumes no responsibility for injury to  
vendee or third person party proximately caused by abnormal  
use of the product even if reasonable safety procedures are  
followed. Additionally, vendee assumes the risk of his use of  
the product.  
Respiratory Protection: Not normally required. For large  
spills, use NIOSH-approved full face-piece respirator with  
HEPA cartridge during cleanup.  
Protective Gloves and/or Eye Protection: Not normally  
required. For large spills, use rubber gloves and chemical  
worker’s goggles during cleanup.  
Ventilation: Outside of normal ventilation, not normally  
required.  
Other Protective Equipment and/or Hygienic Practices:  
None  
Special Precautions  
Precautions for Handling or Storage: Protect from high  
heat. Avoid making dust.  
Other Precautions: None  
OKIPAGE 18/ 24DX  
E-20  
|
 

MTD Lawn Mower i1046 i1050 User Manual
National Instruments Portable Generator NI 5422 User Manual
NETGEAR Switch JGS524E 100NAS User Manual
NeumannBerlin Microphone KMR 82 i User Manual
Nikon Digital Camera 13293 User Manual
Nokia Cell Phone 2630 User Manual
NordicTrack Home Gym NTCW909070 User Manual
North Star Pressure Washer M157594I User Manual
Panasonic Electric Shaver ESLA93 User Manual
Panasonic Ventilation Hood FBA06A User Manual