QUICK GUIDE FOR
NOKIA PC SUITE 5.17
1/20
Important safety notes
All the safety instructions in the user's guides of your phone and computer also
apply when this product is used with the phone.
Remember to make backup copies of all important data to protect against
possible loss or alteration.
Only install software from sources that offer adequate protection against harmful
software.
3/20
1. INTRODUCTION
Further detailed information is given in the separate user guide of your Nokia phone.
Do not use this Quick Guide for Nokia PC Suite in place of the complete user guide,
which provides important safety and maintenance information.
This guide briefly describes how to install and start using Nokia PC Suite. For more detailed
instructions on the use of Nokia PC Suite, please refer to the helps in the Nokia PC Suite
applications.
Nokia PC Suite consists of the following applications:
•
•
•
•
Nokia Application Installer allows you to install JavaTM applications from a compatible
PC to a compatible phone
Nokia Image Converter allows you to modify images and transfer them to a compatible
mobile phone as wallpapers, portrait images, and MMS pictures
Nokia Sound Converter allows you to convert General MIDI ringing tones into Scalable
Polyphony MIDI tones for a compatible phone
Nokia Phone Browser allows you to manage some of a compatible phone’s folders
through Windows Explorer, as well as open other Nokia PC Suite applications
•
•
Nokia PC WAP Manager helps you manage your WAP bookmarks and service settings
Nokia Phone Editor enables you to send short messages and edit the contents of a
compatible phone from your PC
•
•
•
Nokia PC Sync allows you to synchronise contacts and calendar items between a
compatible phone and a compatible PC Personal Information Manager (PIM)
Nokia Connection Manager allows you to choose the connection type between a
compatible phone and a compatible PC when using Nokia PC Suite applications
Nokia Content Copier lets you copy information between two compatible Nokia phones,
back up information on a compatible Nokia phone to a compatible PC, and erase
information from a compatible phone
•
Nokia Modem Options enables you to set options for the data calls you make
Installing Nokia PC Suite also installs data modem adapters, which enable you to use a
compatible phone as a modem in data calls
4/20
2. SYSTEM REQUIREMENTS
To install and run Nokia PC Suite, you need:
•
Windows 98SE/Me/2000/XP (Professional and Home Edition)
•
At least 150 MB of free disk space.
To use the help functionality with Nokia PC Suite, you need:
Internet Explorer 5.0 or newer.
•
For a connection between a compatible phone and a compatible PC, you need at least one
of the following connection sets:
•
•
•
An IrDA (infrared) port in your computer.
The DKU-5 connection cable and a compatible port in a computer.
To give you access from the PC to Bluetooth enabled devices: a Bluetooth enabled PC
and a compatible Bluetooth connectivity solution or a compatible PC with an internal
Bluetooth connectivity, for example one of the following:
•
PCs with internal Bluetooth connectivity:
•
•
Toshiba Tecra 9000
IBM ThinkPad A30p
•
Bluetooth adaptors or software (to be used with compatible, Bluetooth enabled
PCs):
•
•
•
•
•
•
TDK USB Bluetooth module
3COM Bluetooth PCCard (3CRWB6096)
Xircom CreditCard (CBT)
Brainbox USB Bluetooth adaptor
Digianswer Bluetooth Software Suite
Microsoft Windows XP Bluetooth
Tip:
In this guide, all references to a PC (Personal Computer) apply equally to a laptop
computer.
5/20
3. CONNECTING A COMPATIBLE PHONE AND A COMPATIBLE PC
You may need to connect a compatible Nokia phone and a compatible PC for two purposes:
•
•
for transferring information between Nokia PC Suite and the phone or
for using the phone as a modem to access a data network with the PC.
You can use an infrared (IrDA), Bluetooth technology, or a cable connection, depending on
what connection types the phone or the PC supports and what options are selected during
the installation of Nokia PC Suite.
3.1 CONNECTION BETWEEN A COMPATIBLE PHONE AND NOKIA PC SUITE
•
Used when transferring information between a compatible phone and Nokia PC
Suite (for example when you synchronise compatible calendar items and contacts
between your phone and the PC, transfer images or ringing tones, or install
applications with Nokia PC Suite)
•
•
•
Use Nokia Connection Manager to define or change the connection type. Nokia
Connection Manager is installed automatically with any of the Nokia PC Suite
applications, except Nokia Modem Options, which does not use it.
The connection between Nokia PC Suite applications and a compatible phone is
created automatically, if the phone is connected to the PC when opening the
applications.
For more information on using Nokia Connection Manager with different
connection types, see Appendix A in this document.
3.2 USING YOUR PHONE AS A MODEM
•
•
•
Used when sending and receiving data over a data network such as the Internet
Install Nokia Modem Options during Nokia PC Suite installation.
Create the data connection with the connection program of the PC (for example
"Network and Dial-up Connection” in Windows 2000 and “Network Connection” in
XP). Change the modem settings in Windows Control Panel -> Nokia Modem
Options.
Note: You cannot use Nokia Connection Manager for using your phone as a
modem with Nokia Modem Options! Make sure that all connection types are
disabled in Nokia Connection Manager when making a data call.
6/20
4. INSTALLING NOKIA PC SUITE
4.1 BEFORE INSTALLATION
•
•
Uninstall any previous versions of Nokia PC Suite 4.x or Nokia PC Suite 5.x from your
PC.
If you are planning to use Bluetooth connection, install any Bluetooth adaptors or
software needed before installing Nokia PC Suite. For more information on the
adaptors, see the System Requirements chapter in this guide.
If you are planning to use a cable to connect a compatible PC and a compatible
phone, you have to install the DKU-5 cable drivers before the actual Nokia PC Suite.
•
•
You can find the driver setup program on Nokia Phone Support web pages.
4.2 INSTALLING NOKIA PC SUITE
1. Exit all programs and make backup copies of all important data to protect against
possible loss or alteration.
2. If you install Nokia PC Suite from CD-ROM, do the following:
•
Click Install Software from the CD-ROM main menu and then click Nokia PC
Suite 5.17
•
Select the language and click OK. InstallShield Wizard starts the installation
program.
If you install Nokia PC Suite from Nokia Phone Support web pages, do the following:
•
•
Select the language in the drop-down list.
Click Nokia_PC_Suite_517_xx.exe (xx stands for the abbreviation of the
language)
•
•
•
If you accept the terms of the download, click Accept.
Save the file in a preferred location on your computer.
Browse to the downloaded file and click Nokia_PC_Suite_517_xx.exe.
InstallShield Wizard starts the installation program.
3. Follow the instructions on the screen, and note:
•
•
You must read and accept the Licence agreement before continuing.
In the Choose Applications window, select the applications you want to
install. You can either install all applications or just the ones you want.
Select to install Nokia Modem Options if you want to use your phone as a
modem. For more instructions, see chapter Connection between a
compatible phone and Nokia PC Suite in this document.
•
•
If you want to use an infrared connection and you have one of the the first
releases of Windows 2000, you may need to install Microsoft Security Update
for your Windows 2000 to support infrared. The installation program will
prompt you to install the software if necessary. You can install the Security
Update either before or after the Nokia PC Suite installation. The Security
Update software has been made available in
7/20
•
If you want to use a cable connection, connect the phone to the PC when
prompted in the Cable Connection window, following the instructions.
4. Restart your PC.
4.3 AFTER THE INSTALLATION
If you want to use your phone as a modem, you need to do the following after installing Nokia
Modem Options:
•
•
update the Nokia 6800 (IrDA) driver (if you are using Windows XP)
add the Nokia xxxx (Bluetooth) modem
Note: If you are using any other compatible Nokia phone model, select drivers
with the applicable four-digit model number of that phone.
4.3.1 Updating the infrared driver (with Windows XP only)
1. Connect your phone to a compatible PC (via IrDA).
2. Open Control Panel and select Phone and Modem Options.
3. In Phone and Modem Options select the Modems tab. In the Modems tab, select
Standard Modem over IR link, and click Properties.
4. In the Standard Modem over IR link Properties dialog box select the Driver tab, and
select Update Driver.
5. Hardware Update Wizard opens. Select Install from a list or specific location
(Advanced). Click Next.
6. The next dialog asks you to choose your search and installation options. Select Don’t
search. I will choose the driver to install. Click Next.
7. The next dialog asks you to select the modem you want to install. Select Nokia 6800
(IrDA). Click Next.
8. Read the note in the next dialog. Click Continue Anyway to proceed with the update, or
STOP Installation to terminate it.
9. If you proceeded with the installation, click Finish when the installation is complete. The
Nokia 6800 (IrDA) modem is now visible in the modems list. Click OK to close the Phone
and Modem Options window.
The Nokia 6800 (IrDA) modem can now be seen in the Installed Nokia Modems list in the
Nokia Modem Options Control Panel applet.
4.3.2 Adding the Bluetooth modem
1. Activate the Dial-Up Networking profile from your Windows Bluetooth Software. Activate
Bluetooth in your phone and connect the phone to the PC.
2. Open Control Panel and select Phone and Modem Options.
3. In Phone and Modem Options select the Modems tab. In the Modems list, select the
Bluetooth modem you want to update. Click Add…
4. In the Install New Modem dialog box select the Don’t detect my modem; I will select it
from a list. Click Next.
8/20
5. In the Manufacturer list, select Nokia. In the Models list, select the modem you want to
update. Click Next.
6. Select Selected ports option. On the list, select the COM port you want to install the
modem on. Click Next.
7. Read the note in the next dialog. Click Continue anyway to proceed with the update, or
STOP Installation to terminate it.
If you proceeded with the installation, the Nokia xxxx (Bluetooth) modem can now be seen in
the Installed Nokia Modems list in the Nokia Modem Options Control Panel applet.
9/20
5. USING NOKIA PC SUITE
5.1 STARTING NOKIA PC SUITE APPLICATIONS
There are two ways to open Nokia PC Suite applications:
•
from the Start menu: click the Start button, point to Programs and Nokia PC Suite 5,
and then click the application you want.
•
from Nokia Phone Browser: select Nokia Phone Browser in Windows Explorer tree
view and double-click the icon of the application you want to open in the Folder view.
Note: You cannot make data calls with your phone as a modem while any of the
Nokia PC Suite applications are active. Also, you cannot use Nokia PC Suite
applications while you have active data calls.
When making a data call, make sure that none of the connection types in the
Nokia Connection Manager are selected. Reselect the connection type(s) when
you start using Nokia PC Suite again.
5.2 USING NOKIA PC SYNC
Nokia PC Sync allows you to synchronise contacts and calendar/to-do items between a
compatible Nokia mobile phone and a compatible PC Personal Information Manager (PIM),
enabling you to keep the information on both your phone and PC up-to-date.
To create a new synchronization task, click the Nokia PC Sync icon
with the right mouse
button and then click Properties. Click Change PC Application... For more information, see
the Nokia PC Sync help.
When Nokia PC Sync is running, the Nokia PC Sync icon
appears on the taskbar. You
can access the Nokia PC Sync menu commands by right-clicking this icon.
Tip: You can set Nokia PC Sync to start automatically on PC startup. To do this,
right-click the Nokia PC Sync icon on the taskbar and select Enable on Startup.
5.3 USING NOKIA CONTENT COPIER
You can use Nokia Content Copier to
•
•
•
copy information between two compatible Nokia phones,
back up information on a compatible Nokia phone to a compatible PC, and
erase information from a compatible phone.
Note: Erasing information always empties the call register of the phone.
10/20
To start Nokia Content Copier, click the Start button, point to Programs and Nokia PC Suite
5, and then click Nokia Content Copier. Follow the instructions on the screen.
Note: Copyright protections may prevent some images, ringtones and other
content from being copied, modified, transferred or forwarded.
Note: Nokia Content Copier does not include Gallery folder items in the contents
copying. If you want to copy Gallery items on your PC, do it in Nokia Phone
Browser. Note also that items that are copyright protected may not be copied at
all. They can only be used in the phone they were originally subscribed for.
Nokia Content Copier supports several Nokia phone models. The table below lists the
supported phones and the connection types available for different phone models:
Nokia 6250/7110
Infrared connection/the DLR-3P serial cable
Infrared connection
Nokia 8210/8310/8850/8890
Nokia 6210/6310/6310i
Bluetooth connection/infrared
connection/the DLR-3P serial cable
Nokia
Infrared connection/the DKU-5 cable
5100/6100/6108/6220/6610/6800/7210/7250/
7250i
Nokia 6650
Bluetooth connection/infrared
connection/the DKU-2 (USB) cable
Nokia 3100/6800
DKU-5 cable
For information on connecting a compatible phone to a compatible PC, see the user´s guide
of the phone in question.
5.4 MANAGING PHONE CONTENTS ON THE PC
In Nokia Phone Browser, you can manage some of the folders of a compatible phone
through Windows Explorer. Connecting a compatible Nokia phone to a compatible PC with
Nokia PC Suite 5.17 in it creates a phone folder in the Windows Explorer tree view.
Start Nokia Phone Browser from Start > Programs > Nokia PC Suite 5 > Nokia Phone
Browser.
Beneath the phone folder, you can see some phone subfolders, which are read from a
compatible phone when the phone is connected to the PC. You can copy files from the
phone subfolders to your PC folders and vice versa, as well as create new folders in phone
subfolders.
Note: Copying files from the PC to the phone may take a while, depending on the
size of the files. Please ensure there is sufficient time for the copying before
disconnecting the phone.
11/20
Note: Files that are opened from the phone subfolders are temporarily saved in
the Nokia Phone Browser/Fetched Files folder on your PC. If you edit the opened
files and save them, the saved versions still remain in that PC folder. To update
the files in the phone, transfer them from the Fetched Files folder to the
appropriate Nokia Phone Browser phone subfolder by dragging and dropping, for
example.
For more information, see Nokia Phone Browser help.
5.5 USING NOKIA MODEM OPTIONS
5.5.1 Using your phone as a modem
You can use your phone with a variety of commercially available data communications
applications. When configuring a data application, you must select your phone as the
modem. You can select either Nokia 6800 cable, Nokia xxxx (Bluetooth), or Nokia 6800
(IrDA) as the modem, depending on the phone you are using and the modems you have
selected during the installation. If you are using any other compatible Nokia phone model,
select drivers with the applicable four-digit model number of that phone.
To use your phone as a modem
•
•
you need the appropriate data communications software installed on your PC
you must subscribe to the appropriate network services from your home service
provider or Internet service provider
•
you must have the appropriate modem drivers installed on your PC. For example, if
you want to connect your phone to a PC via infrared, you must have the infrared
modem installed on your PC. Each Nokia modem is specific to one phone model
only. This means that if you want to have the option to use more than one Nokia
phone as a modem and these phones represent different phone models, you must
install Nokia Modem Options for each phone model.
•
you must have Nokia Modem Options installed.
1. Connect your phone to the PC.
2. If you have been using your phone with other Nokia PC Suite applications, disable all
connection types from Nokia Connection Manager.
3. Create the data connection with the connection program of the PC (for example
"Network and Dial-up Connection” in Windows 2000 and “Network Connection” in XP).
4. Select the modem you want to use according to the connection program’s instructions
and make the data call.
5. When you want to continue using other Nokia PC Suite applications, end the data call
and select the connection types you want to use in the Nokia Connection Manager
again.
12/20
5.5.2 Changing Nokia Modem Options settings
In Nokia Modem Options, you can change the data call settings to be used when using a
compatible Nokia phone as a modem. You can change, for example, the data connection
speed and the connection method.
You can change data call settings even when the phone is not connected to the computer.
For more information on how to set these options in Nokia Modem Options, refer to Nokia
Modem Options help.
You can start Nokia Modem Options from the Windows Control Panel:
1. Click the Start button, point to Settings, and click Control Panel.
2. In the Control Panel, double-click Nokia Modem Options.
Note: GPRS (General Packet Radio Service) technology allows mobile phones to
send and receive data over the mobile network with improved and faster data
communications than the GSM technology. The use of GPRS services requires
that your network supports GPRS technology and that you have subscribed to this
service. The pricing of GPRS services may differ from that of normal GSM data
services. Contact your service provider for more information.
Note: The use of high speed data services requires that your network supports
HSCSD (High Speed Circuit Switched Data) technology and that you have
subscribed to this service. High speed data services may cost more than normal
data services. Contact your service provider for more information.
5.6 CHANGING NOKIA PC SUITE LANGUAGE
When you are installing Nokia PC Suite, you can select one language, which is used in all
the installed Nokia PC Suite applications. To change the language:
•
•
If you have installed Nokia PC Suite from CD-ROM:
•
uninstall Nokia PC Suite and install it again, selecting the new language at the
beginning of the installation.
If you have installed Nokia PC Suite from Nokia Phone Support web pages:
•
•
uninstall the existing Nokia PC Suite
go back to the support pages, select a new language, download the
Nokia_PC_Suite_517_xx.exe (xx stands for the abbreviation of the language) in
that language on your PC, and install the program on your PC
5.7 UNINSTALLING NOKIA PC SUITE
To uninstall Nokia PC Suite, do one of the following:
1. Select Start -> Programs -> Nokia PC Suite 5 -> Uninstall.
13/20
2. Follow the instructions on the screen until the program files are removed.
OR:
1. Select Start -> Settings -> Control Panel.
2. Double-click Add/Remove Programs.
3. In the list of Currently Installed Programs, click Nokia PC Suite 5.17.
4. Click Change/Remove.
5. Follow the instructions on the screen until the program files are removed.
14/20
6. TROUBLESHOOTING
6.1 CONNECTIONS
How can I check the IrDA connection in Windows 98SE
Before using Nokia PC Suite via IrDA in Windows 98SE, you can test the functionality of the
IrDA port in the following way:
1. Open the Microsoft Infrared Monitor.
2. Check that Infrared communication is enabled in your system.
3. Check in the Status bar that the Infrared Monitor has found your Nokia phone.
Nokia PC Suite does not respond anymore.
If you are using an infrared connection, reactivate the infrared port of the phone and then
restart Nokia PC Suite.
Nokia PC Suite does not respond during a data call.
It is not possible to use Nokia PC Suite during a data call. End the data call and restart Nokia
PC Suite.
I disconnected and then reconnected my phone, without waiting for Nokia PC Suite to
recognise that the phone had been disconnected. Now Nokia PC Suite does not
respond.
Before reconnecting the phone, you should wait until Nokia PC Suite recognizes that you
have disconnected the phone. This process may take a few seconds. The phone icon
displayed on the status bars of Nokia PC Suite applications indicates the status of the phone
connection. In Nokia PC Sync, the Nokia PC Sync tray icon appears yellow and white when
the phone is disconnected. If you have reconnected your phone too early and experience
problems, switch off your phone. Then switch it on again and restart Nokia PC Suite.
How can I get my Nokia 6800 phone work in Nokia Connection Manager using DKU-5
cable?
Preconditions: You have a compatible Nokia mobile phone, DKU-5 cable, Windows OS,
correct drivers to DKU-5 cable and Nokia PC Suite 5.17
1) Install the DKU-5 drivers to your computer.
2) Install Nokia PC Suite 5.17 according to instructions.
3) Plug in the cable. Windows should recognize the cable and find the drivers for it. Select
Yes to the Digital signature question if you accept it, and the drivers will be installed.
4) Start Nokia Connection Manager (if not already open).
15/20
5) Select Serial port connection.
6) Select correct COM port from list shown by pressing Advanced button in Nokia
Connection Manager.
7) Plug in the cable to the phone.
The phone should be shown in Nokia Connection Manager phone list.
I cannot find Nokia Connection Manager
If you installed only Modem Options, Nokia Connection Manager was not installed. When
selecting any other application than Modem Options during the installation, Nokia Connection
Manager is always installed. If available, Nokia Connection Manager can be found in
Windows Control Panel.
Multiple Nokia modems installed
It is recommended that you should not select the "Enable software install for Plug and Play
devices in range" option from Infrared Monitor (Windows 98SE only) as it interferes with the
installation of the Nokia PC Suite.
I cannot make an infrared connection to my PC
Try to decrease the rate of the IrDA connection on your PC to 115200bps, for example.
Go to Control Panel -> Wireless Link -> Hardware tab -> Properties -> Advanced tab. In
the Property list, select Maximum connect rate, and set the Value at 115200bps.
6.2 NOKIA PC SYNC
My Nokia PC Sync makes duplicates when I am synchronising contacts after having
restored them with Nokia Content Copier.
Nokia Content Copier always creates new identifications for the contacts when they are
restored. These contacts are therefore identified as new ones. You can remove the duplicate
contacts by using Nokia Phone Editor.
Old To-do items appear in my phone after I have synchronised the phone with
Microsoft Outlook.
If your Microsoft Outlook Calendar has To-do items without a due date, the items might be
synchronised into the phone even if they are outside of the synchronisation range.
I have birthdays with alarms saved on my phone. After synchronising with Lotus
Organizer, there are no alarms with those birthday items.
The alarm times set on the phone for birthday items will disappear from Lotus Organizer after
synchronisation. The birthday items saved on the phone that have no alarm set will, after
synchronisation, have the alarm set 7 days before the birthday. The alarms on your phone
16/20
will not be affected by synchronisation. This is a Lotus Organizer functionality, and there are
no preventive actions available.
6.3 NOKIA CONTENT COPIER
I disconnected the source phone and then connected the target phone without waiting
for Nokia Content Copier to recognize that the phone had been changed. Nokia
Content Copier does not recognize the target phone now.
Before connecting the target phone, you should wait until your PC stops detecting the source
phone and the text "No phone" appears in the "Target phone" box of Nokia Content Copier.
This process will take a few seconds. If you have connected the target phone too early and
the above-mentioned malfunction occurs, please disconnect the target phone and now wait
until "No phone" text appears in the "Target phone" box and then try connecting the target
phone again.
After using erasing option in Nokia Content Copier, call register of my phone is empty.
Regardless what data has been selected to be erased the whole Factory Setup is run.
Factory Setup will always empty call register.
When transferring data from one phone to another, the profile ringing tones are not
copied accordingly.
The ringing tone IDs differ in some phone models and the tones might not be same in both
phones after using Nokia Content Copier.
Templates are not modified when using Nokia Content Copier
Changes in the source phone templates are not copied into the target phone. The first 20
items in the Templates folder are always left untouched.
6.4 OTHERS
I made a MIDI ringing tone using Nokia Sound Converter, but the phone cannot play it.
The phone's ability to play SP-MIDI files depends also on the properties of the actual SP-
MIDI file. Not all SP-MIDI files can be played by phone.
I cannot open files named with characters not belonging to US-ASCII character set in
Windows 2000 and Windows XP
Filename contains characters that are not defined in the codepage that is assigned to be
used by non-Unicode applications. In Windows 2000 and Windows XP the filename can
contain any Unicode characters. For non-Unicode applications the Unicode characters are
transformed using a codepage transformation table. If no corresponding characters exist in
17/20
the transformation table, the resulting filename no longer matches the original filename.
Therefore the file cannot be opened by Nokia PC Suite applications.
Rename the files using characters from US-ASCII character set and/or from the character set
defined to be used by non-Unicode applications. The codepage settings can be found in
Windows Control Panel, Regional Settings.
I cannot transfer images and ringtones from my phone to Nokia PC Suite
Copyright protections may prevent some images, ringtones and other content from being
copied, modified, transferred or forwarded.
I tried to copy files from the PC to the phone. I copied files to a Gallery folder in Nokia
Phone Browser, but the files are not copied to phone. What is wrong?
Copying files from the PC to the phone may take a while, depending on the size of the files.
Please ensure there is sufficient time for the copying before disconnecting the phone.
What is purpose of the "My Gallery" folder in Nokia Phone Browser?
It is a place for you to store your ringing tones, wallpaper images etc. Of course it is possible
to store files everywhere else, too, in Windows Explorer.
Why "Nokia 6800" is vanishing from Nokia Phone Browser?
Off-line editing is not possible for phone files. When the phone is disconnected from the PC,
then also the phone folder disappears.
18/20
7. APPENDIX A. USING DIFFERENT CONNECTION TYPES
7.1 USING AN INFRARED CONNECTION
You can use infrared to connect a compatible phone to a compatible PC. Note that in
Windows 2000 and Windows XP the infrared connection is called Wireless Link.
When connecting via infrared, there must be no obstructions between the two devices. The
IR ports of the two devices must point at each other. The preferable distance between the
two devices is one metre at most.
To be able to use an infrared connection with Windows 2000 and Windows XP, you must first
disable the Image Transfer application in the Wireless Link software.
To use an infrared connection
1. Activate the IR port of your phone.
2. Activate infrared communication on your PC.
3. Make sure that the phone’s infrared port faces the infrared port of the PC.
4. Open Nokia Connection Manager from Control Panel or by double-clicking the
Nokia PC Suite icon in the PC's Status area.
5. From the connection type buttons, select the connection type(s) you want to use. A
selected button has a green background and a non-selected button a grey
background. A non-selectable button is completely grey.
6. Select your phone from the list of phones. Click Apply.
7. Click OK to close Nokia Connection Manager.
7.2 USING A CABLE CONNECTION
If your phone supports cable connection, you can use a compatible connection cable to
connect the phone to a compatible PC.
Do not switch off the phone while the cable is connected. Make sure that there is sufficient
power in the phone's battery before connecting the phone to the PC.
To use a cable connection
1. Make sure that the phone is switched on.
2. Connect the cable to the PC.
3. Connect the other end of the cable to the phone.
4. Open Nokia Connection Manager from Control Panel or by double-clicking the
Nokia PC Suite icon in the PC's Status area.
5. From the connection type buttons, select the connection type(s) you want to use. A
selected button has a green background and a non-selected button a grey
background. A non-selectable button is completely grey.
19/20
6. If necessary, change the selected COM port by clicking the Advanced button, and
selecting the correct port from the COM port selection dialog (not with USB cable).
Click OK.
7. Select your phone from the list of phones. Click Apply.
8. Click OK to close Nokia Connection Manager.
7.3 USING A BLUETOOTH CONNECTION
You can use Bluetooth technology to connect a Bluetooth enabled Nokia phone to a
compatible PC. For a working connection, you need a Bluetooth enabled PC with appropriate
Bluetooth software.
When connecting via Bluetooth technology, the two devices must be within a 10 metre radius
of each other.
To use a Bluetooth connection
1. Activate the Bluetooth connection of your phone.
2. Open Nokia Connection Manager from Control Panel or by double-clicking the
Nokia PC Suite icon in the PC's Status area.
3. From the connection type buttons, select the connection type(s) you want to use. A
selected button has a green background and a non-selected button a grey
background. A non-selectable button is completely grey.
4. Select your phone from the list of phones. Click Apply.
5. If prompted, select the COM port in the Bluetooth Serial Port dialog.
6. Click OK to close Nokia Connection Manager.
7.4 USING YOUR PHONE AS A MODEM
1. Open Nokia Connection Manager from Control Panel or by double-clicking the
Nokia PC Suite icon in the PC's Status area.
2. From the connection type buttons, disable all connection types. A selected button has
a green background and a non-selected button a grey background. A non-selectable
button is completely grey. Click OK.
3. Connect your phone to the PC.
4. Create the data connection with the connection program of the PC (for example
"Network and Dial-up Connection” in Windows 2000 and “Network Connection” in
XP).
5. Select the modem you want to use according to the connection program’s instructions
and make the data call.
6. When you want to continue using other Nokia PC Suite applications, end the data call
and select the connection types you want to use in the Nokia Connection Manager
again.
To change the data call settings, use Nokia Modem Options.
20/20
|