New Holland
Rotary Tiller Specifications
105A
MODEL
40-inch
40 (1016)
52-inch
52 (1320.8)
60-inch
60 (1524)
Approximate working width, in. (mm)
Tilling depth adjustment with guide shoes, in. (mm) ................................................................................0 to 4.5 (0 to 114.3) ................................................................................
Maximum tilling depth with guide shoes, in. (mm) .........................................................................................7.25 (184.2).......................................................................................
Hitch category............................................................................................................................................................I................................................................................................
Offset adjustment to right, in. (mm)..................................................................................................................11 (279.4) ........................................................................................
PTO hp rating............................................................................................................................................................45...............................................................................................
Rotor drive type......................................................................................................................................................Chain ............................................................................................
Drive protection..................................................................................................................................................Slip clutch ........................................................................................
Rotor speed @ 540 rpm PTO
Number of blades
Blade tip speed (fpm) @ 540 rpm
Weight, lbs. (kg)
231
231
236
20
24
28
1,043
352 (159.7)
1,043
431 (195.5)
1,063
495 (224.5)
MODEL
72-inch
72-inch HD
72 (1828.8)
0 to 5 (0 to 127.0)
7 (177.8)
80-inch HD
80 (2032)
Approximate working width, in. (mm)
Tilling depth adjustment with guide shoes, in. (mm)
Maximum tilling depth with guide shoes, in. (mm)
Hitch category
72 (1828.8)
0 to 4.5 (0 to 114.3)
7.25 (184.2)
I
0 to 5 (0 to 127.0)
7 (177.8)
I or II
I or II
Offset adjustment to right, in. (mm)..................................................................................................................11 (279.4) ........................................................................................
PTO hp rating
Rotor drive type
45
Chain
60
Gear
60
Gear
Drive protection..................................................................................................................................................Slip clutch ........................................................................................
Rotor speed @ 540 rpm PTO
Number of blades
Blade tip speed (fpm) @ 540 rpm
Weight, lbs. (kg)
236
36
1,063
596 (270.3)
211
211
36
40
944
944
765 (347)
810 (367)
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
|