New Holland
600TL Series Front-End Loader Specifications
610TL 620TL
LOADER MODEL
TRACTOR COMPATIBILITY
610TL
TT45A
610TL
TT50A
620TL
TT60A
620TL
TT75A
2WD
2WD
2WD
4WD
2WD
4WD
Max. lift height, in. (mm)
Dump clearance, in. (mm)
Digging depth, in. (mm)
109.0 (2769)
111.7 (2837)
114.5 (2908) 118.0 (2997)
114.5 (2908) 118.0 (2997)
90.3 (2294)
6.0 (152)
93.0 (2362)
5.5 (140)
92.5 (2350)
5.0 (127)
93.0 (2362)
5.5 (140)
92.5 (2350)
5.0 (127)
93.0 (2362)
5.5 (140)
Lift capacity @ 500 mm from
bucket pivot pin, lb. (kg)
1320 (599)
NA
1320 (599)
NA
NA
2210 (1002)
NA
NA
2150 (975)
NA
NA
2210 (1002)
NA
NA
2150 (975)
NA
Lift capacity @ 800 mm from
bucket pivot pin, lb. (kg)
Breakout force @ 500 mm from
bucket pivot pin, lb. (kg)
3400 (1542)
3400 (1542)
Breakout force @ 800 mm from
bucket pivot pin, lb. (kg)
Reach @ max. lift height, in. (mm)
Bucket rollback angle, degrees
Bucket dump angle, degrees
NA
24.3 (617)
20
NA
24.3 (617)
20
4791 (2173) 4520 (2050)
4791 (2173) 4520 (2050)
34.0 (864)
26.0 (660)
34.0 (864)
26.0 (660)
23
45
26
47
23
45
26
47
42
42
Loader specifications may vary with tractor model, hydraulic system, tire, size, etc.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2007 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
|