™
New Holland Boomer 1000 &T1000 Series
Sub-compact Tractor Specifications
Boomer 1020 Boomer 1025 T1010 T1030
MODEL
Boomer 1020/T1010
Boomer 1025/T1030
ENGINE
Gross engine hp (kW)
PTO hp (kW)
20 (14.9)
15.5 (11.6)
3000
26 (19.4)
19.7 (14.7)
3000
Rated speed, rpm
Cylinders
3
3
Displacement, cu. in. (L)
Fuel capacity, gal. (L)
58.2 (.95)
7.1 (26.9)
69.0 (1.1)
7.1 (26.9)
TRANSMISSIONS
Hydrostatic transmission
Min/Max forward speed
with R4 tires, mph (k/hr)
2-speed
2-speed
0-10.3 (16.6)
0-10.3 (16.6)
BRAKES
Location
Type
.........................................................Single LH side .........................................................
..............................................................Wet disc..............................................................
POWER TAKE OFF (PTO)
Rear
Mid
540
2200
540
2200
HYDRAULICS
Pump type
Gear
Gear
System type
...........................................................Open center ...........................................................
Pump capacity, gpm (lpm)*
Implement flow, gpm (lpm)
Steering priority flow, gpm (lpm)
3-point hitch lift capacity,
24 in. behind the lift balls, lb. (kg)
3 point hitch control
*@ rated speed
5.6 (21.2)
3.75 (14.20)
1.85 (7.0)
5.6 (21.2)
3.75 (14.21)
1.85 (7.0)
700 (318)
700 (318)
.....................................................Self centering valve .....................................................
AXLE OPTIONS
FWD
Sensitrak™ Auto FWD
Standard
NA
Standard
Optional
DIMENSIONS (with R4 tires)
Overall length witih 3-point hitch,
in. (mm)
96.3 (2445)
46.4 (1180)
55.1 (1400)
72.4 (1840)
7.3 (185)
96.3 (2445)
46.4 (1180)
55.1 (1400)
72.4 (1840)
7.3 (185)
Overall width (minimum), in. (mm)
Wheelbase, in. (mm)
Height to top of ROPS, in. (mm)
Ground clearance
Shipping weight w/R4 tires, lbs. (kg)
1455 (660)
1455 (660)
TIRE OPTIONS
Turf Tires
Front
.................................................18x8.5-8, 4 PR (R3) Turf.................................................
................................................26x12-12, 4 PR (R3) Turf ................................................
Rear
Industrial Tires
Front
Rear
..................................................18x8.5-8, 4 Pr (R4) Ind..................................................
.................................................26x12-12, 4PR (R4) Ind .................................................
STANDARD EQUIPMENT:
• Toolbox
OPTIONAL EQUIPMENT:
FRONT ATTACHMENTS
• Loader
MID-MOUNT ATTACHMENTS
• 60” mid-mount mower
• Grass catcher
REAR ATTACHMENTS
• Finishing mowers
• Rotary tiller
• Cup holder
• Foldable ROPS
• 12 Volt accessory power outlet
• Quick-attach snow blower
• Quick-attach rotary broom
• Quick-attach front blade
• Ballast box
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1 of 1
|