X-PLORA V8
X-V8 SERIES DAB/FM TUNER
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity X-PLORA V8 tuner.
This model uses the very latest DAB/FM radio text receiver to achieve excellent technical specification and
unparalleled broadcast sound quality, a perfect answer to digital and analogue tuner requirements in a
small, beautifully engineered package.
Used properly and carefully, it should give many years of outstanding musical reproduction.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they
may harm the surface finish.
If you have any questions about your audio system,
Please consult your dealer who is there to help and advise.
X-PLORA V8
GENERAL ADVICE
INSTALLATION PRECAUTIONS and USER INFORMATION
Your new X-PLORA V8 is designed and built to provide trouble-free performance, but as with all electronic devices it
is necessary to observe a few precautions:
Heed all warnings shown on the back of the product.
Only connect the X-PLORA V8 to a mains outlet having the same voltage as marked at the back of the unit.
Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched
off.
Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items
placed on them.
Do not use near water, or place water-filled containers on the X-PLORA V8, for example, a flower vase or
potted plants. If water does spill inside, immediately pull out the mains plug from the wall socket and
inform your dealer, who should then check the unit before further use. Entry of liquid into the X-
PLORA V8 is dangerous, and may cause electric shock or fire hazard.
Do not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.
Do not remove any covers or try to gain access to the inside. There are no internal adjustments or fuses you
can replace yourself. Refer all service work to an authorised Musical Fidelity agent.
Note: Unauthorised opening of the equipment will invalidate any warranty claim.
Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents - they may
harm the surface finish.
The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by
lightning. For protection of your audio system during electrical storms, remove the mains plugs and disconnect any
aerial lead.
If after-sales service is required, to help your dealer identify the X-PLORA V8 please quote the serial number located
on the rear panel of the unit.
Issue 3: 19th October 2006
Page 3 of 14
X-PLORA V8
ITEM DISPOSAL INFORMATION
`
DISPOSAL
AFVAL
The crossed out wheeled bin label that appears on the
Het label op de achterzijde van dit apparaat, een
afvalbak op wielen met een kruis doorgehaald, geeft aan dat dit
apparaat niet samen met gewoon huishoudafval mag worden
weggegooid. Om mogelijke schade aan onze leefomgeving te
voorkomen dient dit apparaat, gescheiden van gewoon
huishoudelijk afval, te worden afgevoerd zodat het op een
milieuvriendelijke manier kan worden gerecycled. Neem voor
beschikbare inzamelplaatsen contact op met uw gemeentelijke
reinigingsdienst of met uw elektronica leverancier.
back panel of the product indicates that the product must not be
disposed of as normal household waste. To prevent possible harm
to the environment please separate the product from other waste to
ensure that it can be recycled in an environmentally safe manner.
Please contact your local government office or your retailer for
available collection facilities.
DISPOSITION
La poubelle sur roulettes barrées X, qui apparaît en logo
sur le panneau arrière du produit, indique que celui-ci ne doit pas
être traité comme un déchet domestique commun. Afin de protéger
l'environnement, ce produit électronique devra être géré
séparément et donc recyclé selon les nouvelles normes
Européennes Rohs concernant les déchets d'appareils électroniques.
Prière de contacter les services concernés gouvernementaux ou
votre point de vente pour l'élimination et l'enlèvement de déchets
électroniques équipés de composants électroniques.
HÄVITTÄMINEN
Yliruksattua jäteastiaa kuvaava tarra tuotteen
takalevyssä kertoo, että tuotetta ei saa käsitellä normaalina
talousjätteenä. Ympäristön suojelemiseksi on tuote pidettävä
erillään muusta jätteestä ja se on kierrätettävä ekologisesti
kestävällä tavalla. Ota yhteyttä laitteen myyjään tai Pirkanmaan
Ympäristökeskukseen lähimmän kierrätyskeskuksen löytämiseksi.
AFSKAFNING
DISPOSAL
Logoet med en skraldespand med kryds over på bagsiden
af apparatet indikerer at dette produkt ikke må kasseres som normal
husholdningsaffald. For at forebygge mulig skade på miljøet, bedes
De separere dette produkt fra andet affald, og sikre at det bliver
genbrugt på en miljørigtig måde. Kontakt venligst de lokale
myndigheder eller din forhandler for oplysning om nærmeste
tilgængelige opsamlingssted for elektronikaffald.
La etiqueta cruzada hacia fuera del compartimiento que
aparece en el panel trasero del producto indica que el producto no
se debe reciclarse como basura normal de la casa. Para prevenir
daños posible al ambiente separe por favor el producto de otras
basura para asegurarse de que puede ser reciclada de una manera
ambientalmente segura. Entre en contacto por favor a su oficina
gubernamental local o a su minorista para las instalaciones
disponibles de la colección.
∆ΙΑ∆ΙΚΑΣΙΑ ΑΠΟΡΡΙΨΗΣ
ΤΟ
ΣΗΜΑ
ΜΕ
ΤΟΝ
∆ΙΑΓΕΓΡΑΜΜΕΝΟ
RIFIUTI
ΤΡΟΧΗΛΑΤΟ ΚΑ∆Ο ΑΠΟΡΡΙΜΑΤΩΝ ΣΤΗΝ ΠΙΣΩ ΟΨΗ
ΤΟΥ ΜΗΧΑΝΗΜΑΤΟΣ
L'etichetta del cassonetto barrato riportato sul retro
dell'apparecchio indica che il prodotto non deve essere smaltito
tramite la procedura normale di smaltimento dei rifiuti domestici.
Per evitare eventuali danni all'ambiente, separare questo prodotto
da altri rifiuti domestici in modo che possa venire riciclato in base
alle procedure di rispetto ambientale. Per maggiori dettagli
sulle aree di raccolta disponibili, contattate l'ufficio govenativo
locale od il rivenditore del prodotto.
∆ΗΛΩΝΕΙ ΟΤΙ ΤΟ ΠΡΟΙΟΝ ΑΥΤΟ ∆ΕΝ ΠΡΕΠΕΙ ΝΑ
∆ΙΑΧΕΙΡΙΣΘΕΙ ΣΑΝ ΣΥΝΗΘΙΣΜΕΝΟ ΟΙΚΙΑΚΟ ΑΠΟΒΛΗΤΟ.
ΠΡΟΣ ΑΠΟΦΥΓΗ ΕΝ∆ΕΧΟΜΕΝΗΣ ΕΠΙΒΑΡΥΝΣΗΣ ΤΟΥ
ΠΕΡΙΒΑΛΛΟΝΤΟΣ, ΞΕΧΩΡΙΣΤΕ ΤΟ ΠΡΟΙΟΝ ΑΠΟ ΤΑ
ΑΛΛΑ
ΑΠΟΡΡΙΜΑΤΑ ΩΣΤΕ ΝΑ ΕΞΑΣΦΑΛΙΣΘΕΙ Η ΑΝΑΚΥΚΛΩΣΗ
ΤΟΥ ΜΕ ΤΟΝ ΠΡΕΠΟΝΤΑ ΤΡΟΠΟ.
ΠΑΡΑΚΑΛΟΥΜΕ ΝΑ ΕΠΙΚΟΙΝΩΝΗΣΕΤΕ ΜΕ ΤΗΝ ΤΟΠΙΚΗ
FACHGERECHTE ENTSORGUNG:
ΥΠΗΡΕΣΙΑ ΑΝΑΚΥΚΛΩΣΗΣ
ΑΓΟΡΑΣ ΓΙΑ ΠΕΡΙΣΣΟΤΕΡΕΣ
Η
ΜΕ ΤΟ ΚΑΤΑΣΤΗΜΑ
ΛΕΠΤΟΜΕΡΕΙΕΣ.
Das auf der Geräterückseite angebrachte Label deutet
darauf hin, dass das Produkt nicht mit konventionellem
Hauskehricht entsorgt werden darf. Um Schäden und
Verschmutzungen an Umwelt und Mensch zu vermeiden, muss das
Produkt fachgerecht entsorgt und von anderem Abfall getrennt
werden. Wenden Sie sich bei Fragen hierzu an Ihren Fachhändler
oder an eine öffentliche Informationsstelle.
Issue 3: 19th October 2006
Page 4 of 14
X-PLORA V8
INSTALLATION
INTRODUCTION
Congratulations on the purchase of your new X-PLORA
POWER CONNECTION
V8
The power lead should be connected to a Musical Fidelity
power supply unit designed for this product, such as the
TRIPLE-X (see your dealer for more information). The
connector from this tuner mates with the 4-way socket
labelled X-PLORAV8 on the rear of the power supply unit.
The connector should fit comfortably with a small click when
properly seated. Do not force the connector.
DAB/FM tuner.
The X-PLORA
V8
is an advanced DAB/FM receiver with
radio text features for FM. Its case design complements the X-
V8
series components which include an Integrated amplifier
and CD player all in the same convenient size.
The tuner is designed to bring DAB into the realms of hi-
fidelity sound reproduction to complement the very latest
technology DAB/FM receiver circuit. Great attention has been
paid to internal layout, isolating each circuit section to prevent
possible interaction. The result is a DAB/FM tuner which has
a smoother response than previously possible with none of the
“hardness” of other units.
The resultant performance achieved by this unit is among the
best in the world. It has excellent signal to noise ratio, low
distortion, extraordinary resolution and fine detail.
CLEANING
Before cleaning the unit, switch off power at the mains
switch and remove the mains plug from the wall socket.
Clean the cabinet and remote control unit using a moist cloth.
We do not advise using solvents, white spirit or thinners as
they could damage the surface finish.
UPGRADE PATH
Early in 2007 two interesting new X-V8 series products are
coming.
- The TRIPLE-X170 PSU is an upgrade Power Supply Unit.
It increases the power of your X-T100 to 85+85 wpc and
improves its peak current. The TRIPLE-X170 PSU will power
the X-T100, X-RAYV8 and X-PLORAV8 simultaneously. Any
product connected to it will sound better.
- The X-DACV8 is a super-performance Digital to Analogue
Converter with a tube output. Its performance is verging on
state-of-the-art and sounds extraordinary. The X-DACV8 is
self-powered and also has power supply outlets for the X-
RAYV8 and X-PLORAV8. When the X-RAYV8 is paired with
the X-DACV8, what you have is a mini KW25 system (the
KW25 Transport/DAC received incredible reviews which
recon it’s probably the best CD player ever).
INSTALLATION
Position the X-PLORA
V8
on a stable, horizontal surface
where there is no risk of it being knocked, or subjected to
vibration such as from loudspeakers.
AERIAL (ANTENNA)
For ease of installation, a tri-band aerial is supplied with the
unit. This covers the FM, DAB II, III and L-bands and picks
up sufficient signal for most domestic purposes. However, if
FM stereo background noise is obtrusive, radio text is
corrupted or DAB cut-out is experienced, or unit is to be used
in a fringe area, a rooftop DAB and FM aerial may be
required. Please contact an approved aerial contractor with
good local knowledge.
The tri-band aerial is plugged into the tri-band antenna F
connector at the rear of the unit, and should be securely
fastened by tightening the nut.
AUDIO CONNECTIONS
Outputs: Connect your amplifier’s left and right TUNER or
AUX (line level) inputs to the RCA sockets on the back panel
marked as LEFT and RIGHT outputs.
If desired, the unit can also be attached to an external DAC
of your choice. The unit outputs COAX and OPTICAL digital
signal stream at 48kHz.
NOTE: The digital output works for DAB and FM.
Issue 3: 19th October 2006
Page 5 of 14
X-PLORA V8
POWER SUPPLY OPTIONS & WIRING
3-component setup, standard power supply
4-component setup, upgraded power supply
X-PLORA V8
X-PLORAV8
X-RAYV8
X-DACV8
TRIPLE-X
X-RAY V8
XT-100
Figure 1
The standard 3-component setup using the original
TRIPLE-X PSU (bottom left) is shown in figure 1.
XT-100
The power connector from the X-PLORAV8 mates with
the 4-way socket labelled X-PLORAV8 on the rear of the
TRIPLE-X PSU. The connector should fit comfortably
with a small click when properly seated.
TRIPLE-X170
Figure 3
The recommended power supply wiring for the four-
component setup, including upgrade power supply and
X-DACV8, is shown in figure 3.
The power connector from the X-RAYV8 mates with the
5-way socket labelled X-RAYV8 on the rear of the
TRIPLE-X PSU. The connector should fit comfortably
with a small click when properly seated.
The power connector from the X-PLORAV8 mates with
the 4-way socket labelled X-PLORAV8 on the rear of
the X-DACV8. The connector should fit comfortably
with a small click when properly seated.
The power connector from the XT-100 Integrated
amplifier mates with the 6-way socket labelled XT-100
on the rear of the TRIPLE-X PSU. The connector should
fit comfortably with a small click when properly seated.
The power connector from the X-RAYV8 mates with
the 5-way socket labelled X-RAYV8 on the rear of the
X-DACV8.The connector should fit comfortably with a
small click when properly seated.
3-component setup, upgraded power supply
The XT-100 integrated amplifier should be powered
from the upgrade TRIPLE-X170 power supply unit.
Connect your XT-100 to this supply through the 6-way
XLR socket at the back. The X-PLORAV8 and X-
RAYV8 are now supplied from the X-DACV8. This frees
up reserve supply for the power amplifiers in the
XT100.
X-PLORAV8
TRIPLE-X170
X-RAYV8
XT-100
This is by no means an exhaustive list, as it is possible
to use the original TRIPLE-X power supply, say, to
supply the CD player alone further isolating it from the
DAC and other circuits. The beauty of this system is its
incredibly flexible allowing considerable tweaking to
obtain optimum audio performance.
Figure 2
The upgraded 3-component setup using the TRIPLE-
X170 PSU (bottom left) is shown in figure 2.
The wiring is identical to that given under the standard
setup shown above. Simply remove the TRIPLE-X PSU
and use the TRIPLE-X170 PSU in its place.
Issue 3: 19th October 2006
Page 6 of 14
X-PLORA V8
FACILITIES AND CONNECTION
FRONT PANEL
1
2
3
1. BAND, SEARCH buttons and IR lens
3. TUNE UP/DOWN, SEARCH buttons
2. DISPLAY window
REAR PANEL
4
5
6
7
4. DIGITAL OUTPUTS RCA coaxial and optical
6. DAB/FM aerial F-TYPE
5. LEFT AND RIGHT RCA Phono outputs
7. POWER CABLE for connection to Triple-X psu only
Issue 3: 19th October 2006
Page 7 of 14
X-PLORA V8
REMOTE CONTROL
The remote control shown below enables functions to be operated from a convenient distance. Equivalent buttons on the remote
control have the same functions as those on the front panel of the unit. Other functions are only available by remote control.
As the handset uses an invisible infra-red light beam, the front edge must be pointed directly towards the receiver window at the
front of the player, without visual obstruction between them.
If the range of the remote control greatly decreases, replace the batteries with new ones. Do not mix old and new batteries - two are
required, size AAA, LR03 or SUM-4.
Please dispose of used batteries in accordance to local regulations.
Tuner Buttons:
INFO – To access broadcast information
MENU – to choose options
BAND – Selects DAB or FM
AUTO TUNE – finds previous/next
broadcast
STORE – Stores station as preset
MONO/STEREO – Option for weaker
FM stations
SELECT – To choose preset/DAB
station
DAC Buttons:
PRESET ↑ ↓ selects preset
DIG 1 – Selects DAC digital input 1
DIG 2 - Selects DAC digital input 2
DIG 3 - Selects DAC digital input 3
USB - Selects DAC USB input
TUNE ↑ ↓ steps up/down band
VOLUME UP/DOWN – sets
volume level
Amplifier Buttons:
MUTE – Mutes unit until pressed
again
PHONO – Selects Phono input
AUX 1 – Select Source AUX1 or PDI
AUX 2 – Select source AUX 2
AUX 3 – Select source AUX 3
DISPLAY – Dims display
CLEAR – Clears selected pre
programmed track
CD Buttons:
TIME – Displays Track Time/Time
remaining
A/B Sets repeat start/end to repeat
section of track
0-9 Buttons – Used to select track
numbers
SHUFFLE – Plays back tracks in
random order
CHECK – Check pre programmed
tracks
TRACK – Next/previous track
PAUSE/PLAY – Stop/start CD
playback
PROGRAM – Programs selection and
order of tracks
INTRO – Player plays first 10 seconds
of each track
REPEAT – Repeats whole disk or
selected tracks
SEARCH – Fast forward/backward
through track
STOP – Stop playing/Eject CD
Issue 3: 19th October 2006
Page 8 of 14
X-PLORA V8
DAB FUNCTION BUTTONS
DAB TUNER BUTTONS
PRESET UP and PRESET DOWN (remote control)
When the power is turned ON, the station you were
previously receiving will be selected automatically.
The name of the station appears in the display.
PRESET UP/DOWN buttons are used to select one of
ten DAB preset memory locations. Press select when the
desired preset is displayed.
STORE (remote control)
BBCWorld Service
BBC National DAB
It is possible to store favourite stations in preset memory
locations using the STORE button as follows:
Tune to the station required:
All settings, and stored stations, will be retained in
memory while the unit is turned off. On selection, the
last band (DAB/FM) and station is remembered.
BBCWorld Service
BBC National DAB
BAND
This button alternates the tuner between receiving DAB
and FM stations
Press PRESET UP/DOWN buttons until the desired
preset. is displayed.
BBCWorld Service
<Empty preset
SEARCH
1>
To update your tuner with locally available DAB
stations Press the SEARCH button (AUTO TUNE on
remote).
Press and hold the STORE to accept this preset. The
display will indicate the preset is saved,
BBCWorld Service
AUTO TUNE
Preset
1
saved
QUICK SCAN
The tuner will search through all the ensembles and
pick out all the locally available stations.
then reverts to the selected station
Note: this will overwrite any station stored previously
on this preset.
Briefly pressing the button will display current preset
without storing.
™™™™™™™™™™™™™™™™ 0
Searching...
There are 10 presets available for programmes on the
DAB band (in addition to the 10 provided for FM).
Presets are remembered even if the unit is switched off.
When a station is found, the name is briefly displayed
and the station tally at the top right increments. Note: if
there are stations already stored, the tally does not start
from 0, but from the number of stations previously
MONO/STEREO(remote control)
™™™™™™™™™™™™™™™™ 1
BBC Radio 1
This button has no function when in DAB mode
INFO
stored. In this manner, the station list is updated.
Once all the locally available bands have been
scanned, the unit reverts to the first station found by
name (in alphabetical order), or the previous broadcast
being listened to, if applicable.
Displays the current broadcast information in the
following order:
- DAB programme text
- Music Type
- Network name
TUNE UP/DOWN
- Date and time (as transmitted by network)
- Transmission mode and bit rate
- Ensemble and frequency
- Signal Strength
To select a station, simply press the TUNE ↑ or ↓
buttons to cycle through the list of receivable
broadcasts in your area. When the required station is
displayed, press the SELECT button to listen
See the section on the PRESET buttons to store
favourite stations for easy recall
- Returns to top of this list
Issue 3: 19th October 2006
Page 9 of 14
X-PLORA V8
DAB FUNCTION BUTTONS
MENU (DAB options, remote control)
Press MENU to access menu options whilst in DAB
mode.
Use the TUNE up/down buttons to cycle through the
options, and the SELECT button to choose displayed
option.
Menu options available for DAB are:
Manual Tune: Allows manual search of ensembles and
DAB frequencies
Canadian L band: Enables Canadian L-Band
European L Band: Enables European L band
Service Base: Factory use only
Customer Version: Software version reference
System reset: RESETS all presets and performs a new
scan of DAB band
Issue 3: 19th October 2006
Page 10 of 14
X-PLORA V8
FM FUNCTION BUTTONS
AUTO-TUNE (remote)
To auto search stations, press the AUTO TUNE
button. The tuner will search upwards through the FM
band and pick out the next station for you.
PS:
Preset
FM
saved
1
and then revert to selected station.
105.80MHz
FM
PS:
FM
Radio 1
SEARCH
This button functions in a similar manner to AUTO
TUNE, however if pressed and held for more than a
second, the tuner will scan back down the band to the
previous station (the scan-down function is not
available on the remote).
Note: this will overwrite any station stored previously
on this preset.
Briefly pressing the button will display current preset
without storing. There are 10 presets available for
programmes on the FM band (in addition to the 10
provided for DAB). Presets are remembered even if the
unit is switched off.
BAND
This button alternates the tuner between receiving FM
and DAB stations
MONO/STEREO (remote control)
This button enforces mono reception when inadequate
aerial signal strength results in noisy stereo reception.
MONO ‘forces’ mono at all times until the button is
pressed again for AUTO. In AUTO mode, the tuner
automatically switches according to signal strength.
TUNE UP/DOWN
To manually tune to a station, press the TUNE ↑ or ↓
buttons to cycle through the FM band. Turning slowly
gives fine-tuning steps (50kHz).
When the required station frequency is displayed, the
station should be heard, and after a few seconds radio
text information is displayed, if available.
INFO (remote control)
Displays the current broadcast information in the
following order:
PS:
FM
PI: Programme identification*
PTY: Programme type*
Radio 1
RT: Radio text*
See the section on the PRESET buttons to store
CT: Clock date and time (as transmitted by network)*
MS: Music/Speech (info only)*
DI: Decoder information*
Signal Strength with bar graph
Audio mode
favourite stations for easy recall
PRESET UP and DOWN (remote control)
PRESET UP/DOWN buttons are used to select one of
ten FM preset memory locations. Press select when the
desired preset is displayed.
AF: Alternate frequency*
- Returns to top of this list
* Relies on FM RDS. Not displayed if no or insufficient
RDS signal.
STORE (remote control)
It is possible to store favourite stations in preset
memory locations using the STORE button as follows:
Tune to the station required:
MENU (FM options, remote control)
Press MENU to access menu options whilst in FM
mode.
Use the TUNE up/down knob to cycle through the
options, and the SELECT button to choose displayed
option.
Menu options available for FM are:
System reset: RESETS all presets and tuning to
87.50MHz (beginning of FM Band)
Customer Version: Current software version
PS:
FM
Radio 1
Press PRESET UP/DOWN buttons until the desired
preset is displayed.
PS:
Preset
FM
empty
1
Press and hold STORE to accept this preset. The
display will indicate the preset has saved
Issue 3: 19th October 2006
Page 11 of 14
X-PLORA V8
TUNER PROBLEMS?
Basic problem-solving with a tuner is similar to troubleshooting other electrical or electronic equipment. Always check
the most obvious possible causes first, such as the following examples:
Problem
No power / display
Probable Cause
Remedy
Power plug is not inserted into psu
correctly
Plug in securely fully into power
supply’s X-PLORAV8 rear socket
No audio output
Insufficient DAB signal.
Check aerial. Advice: page 5 AERIAL
(ANTENNA)
Check output connecting leads
Leads incorrectly connected
Check amplifier connections and select
correct input
Wrong input selected on amplifier
Excessive background noise (hiss or Position of aerial incorrect.
Reposition aerial.
crackle on FM)
Local signal strength insufficient.
Consider a rooftop DAB/FM aerial
page 5 AERIAL (ANTENNA)
Audio cuts out on DAB
Tuner does not display FM RDS
station name and/or text
Tuned station does not transmit the
RDS feature
RDS information feature therefore
unavailable.
Local signal insufficient to receive
RDS properly
Try repositioning the whip aerial if
used. Improve the aerial.
Remote control does not work
One or more batteries fitted the
wrong way round
Insert batteries correctly
Change batteries – do not mix old and
new ones
Batteries are flat
Remote control is not pointed directly Ensure there is no obstruction between
towards the front panel of the tuner
the remote control and player tuner
Remote control range has greatly
reduced
Batteries are running out
Change batteries for a new set
If none of these actions affect a cure, please contact your dealer, or an authorised Musical Fidelity service agent.
Remember; never open the case of the X-PLORA V8 yourself, as this will invalidate the guarantee.
Issue 3: 19th October 2006
Page 12 of 14
X-PLORA V8
TUNER SPECIFICATIONS
TUNER:
DAB Specifications
Supported DAB modes:
I, II, III, and IV VHF 174 240 MHz RF frequency range
L-Band (standard and Canada) 1452 1492 MHz
VHF sensitivity
L-Band sensitivity
-96 -97 dBm
-95 -96.5 dBm
(Measured to EN50248)
(Measured to EN50248)
L-band after error correction
Band III after error correction
Adjacent Channel Selectivity
Far-off selectivity
-15 dBm Maximum Input Signal for Pseudo channel BER with real value 0.02
0 dBm
32 33 dBm
48 dBm
(Measured to EN50248)
(Measured to EN5024845)
Acquisition sensitivity
Input Impedance
101 dBm
50Ω F type connector (to VHF/L-Band diplexer)
FM Specifications
RF Frequency Range
RF Sensitivity
87.5-108 MHz
RF Limiting Sensitivity
(S+N)/N Ultimate s/n ratio
THD
Stereo Channel Separation
RDS data
0.5 µV
63 dB (90MHz@200mV/22.5KHz Dev. Fmod=1 KHz)
0.5% (90MHz@200mV/75KHz Dev. Fmod=1 KHz)
30 dB
CENELEC EN50067 compliant
WHIP AERIAL:
Operating Frequency
FM Band 88-108MHz
Band III 174-240MHz
L-Band 1452-1492MHz
2dBi
Gain
FM & Band III
L-Band
5dBi
Impedance
75Ω
S.W.R.
Polarization
Connector
<2.0:1 at res. freq.
Vertical
F-type
Operating temperature
Storage temperature
Length
-20 to +65°C
-30 to +75°C
Sleeve 36mm
Retracted 153±10mm
Extended 646±10mm
180° swivel joint on plug with locking nut
Mechanical Fixing
CONNECTIONS:
Digital outputs
1 optical (Toslink), 48kHz
1 S/PDIF (RCA connector), 48Hz
1 pair RCA
Line level outputs:
Power requirement:
For use only with suitable Musical Fidelity power supply e.g. Triple-X.
Weight:
4.0 kg, 8.8 lbs
5.25 kg, 11.5 lbs
unit only, unboxed
in shipping carton
Dimensions:
219 mm, 8.6 inches
wide
88 mm, 3.5 inches
340 mm, 13.4 inches
high including feet
deep including terminals
Standard accessories:
Tri-Band Whip aerial
Musical Fidelity reserves the right to make
improvements which may result in specification
or feature changes without notice.
Issue 3: 19th October 2006
Page 13 of 14
X-PLORA V8
MANUAL REVISION
RELEASE
DATE
6th September 2006
18th Ocober 2006
19th October
CHANGES
Issue 1
Issue 2
Issue 3
[1st release]
Added power supply
wiring options
Improved P.7
Issue 3: 19th October 2006
Page 14 of 14
|