Murphy Switch WD100 User Manual

WD-8198B  
Revised 03-06  
Catalog Section 30  
(00-02-0088)  
Swichgage® Kits for Engines  
WD100 Series  
Universal Mounting  
Panel  
Guard against low oil  
pressure or high  
running temperature  
For farm or  
construction  
equipment  
WD185  
Engine Kit  
Description  
Kit Combinations  
These kits are available for virtually any engine application, any  
engine type, or can be custom ordered to meet a specific use.  
The WD100 Series Swichgage kits provide engine monitoring that  
shuts down farm, construction, or other engine powered  
equipment, when dangerous pressures or temperatures occur. Kit WD100 includes: A, and B  
The control center for each of these kits is the compact and Suitable for use on distributor ignition engines or on diesels  
adjustable, Universal Mounting Panel. This panel holds two having a shutdown solenoid in the fuel pump.  
®
Shipping Weight: 4.75 lbs (2.2 kg)  
Swichgage(s) and a Tattletale magnetic switch, and shut down  
Shipping Dimensions: 9-3/4 in. x 9-1/4 in. x 5-3/4 in. (248 mm x 235 mm x 146 mm)  
device where appropriate.  
Kit WD150 includes: A, B, C, and E  
Specifications  
Suitable for most liquid cooled diesel engines.  
Shipping Weight: 6.15 lbs (2.8 kgs.)  
Murphy Swichgage products are two-instruments-in-one: (1) an  
Shipping Dimensions: 9-3/4 in. x 9-1/4 in. x 5-3/4 in. (248 mm x 235 mm x 146 mm)  
accurate indicating gauge with (2) a built-in, adjustable, limit switch.  
Kit WD175 includes: A, B, C, and E  
518PH Tattletale magnetic switch is designed to shut down  
engines; operates as a circuit breaker to interupt the ignition circuit  
to a distibutor or to close a solenoid fuel valve on diesels.  
Suitable for air cooled diesel engines; 10 mm 1.5 adaptor and  
special head temperature bulb. Includes SV-Series fuel valve.  
Shipping Weight: 6.15 lbs (2.8 kgs.)  
Temperature capillary tubes are 6 ft. (1.8 m) standard, but can  
Shipping Dimensions: 9-3/4 in. x 9-1/4 in. x 5-3/4 in. (248 mm x 235 mm x 146 mm)  
be ordered in any length.  
Kit WD185 includes: A, B, C, D, and E  
*
Standard Swichgage ranges :  
Suitable for engines with gear driven transfer pump. (SV-Series is  
not required on engines with built-in shutdown in the injector  
Pressure: 0-100 psi (0-689 kPa) [0-6.89 bar]  
Temperature: 100-250°F (37-121°C)  
pump.)  
Shipping Weight: 6.20 lbs (2.8 kgs.)  
*Other ranges are available on request.  
Shipping Dimensions: 9-3/4 in. x 9-1/4 in. x 5-3/4 in. (248 mm x 235 mm x 146 mm)  
WD100 Series Kits  
Depending upon the kit selected, the following components are  
supplied:  
A Universal Mounting Panel which consists of:  
• 20P, oil pressure Swichgage instrument  
• 20T, temperature Swichgage instrument with 6 ft. (1.8 m)  
capillary, or 20TH, temperature Swichgage instrument for  
WD175 kit.  
A
E
• 518PH Tattletale magnetic switch  
B
B Bracket mounting bolts, washers and nuts.  
C CKV2336, fuel reverse flow/check valve.  
D PRV50, fuel pressure relief valve  
D
E SV-Series, fuel shut-off solenoid valve (1/4 NPT X 1/4 NPT)  
C
Specify 12VDC or 24VDC.  
—Especially designed for adaption to a wide variety of engines.  
WD-8198B page 1 of 2  
 

Minelab Metal Detector XS 2APro User Manual
Murray Lawn Mower MX17542LT User Manual
National Instruments Electronic Accessory CFP RLY 421 User Manual
NETGEAR Network Hardware WG102NA User Manual
Omega Engineering Stud Sensor LVU30 User Manual
Omega Speaker Systems Network Card wi Series User Manual
Onkyo Stereo Receiver TXNR525 User Manual
Palsonic CD Player CD6588DM3 User Manual
Panasonic Camera Accessories CF VZS251A User Manual
Parkside Saw PFS 710 A1 User Manual