Serial Device Server Solutions
NPort 5410, 5430, 5430I
World’s First LCM Display Serial Device Server
Features
• Easy-to-use LCM (Liquid Crystal Module) interface for setting
up IP address
• Auto-detecting 10/100 Mbps Ethernet
• 4 ports with RS-232 or RS-422/485 interface
• Surge protection for all serial signals (15 KV ESD)
• Supports TCP Server, TCP Client, UDP, and Real COM Modes
• Supports web, telnet, console
NPort 5410
• Supports SNMP MIB-II for network management
• NPort 5430I has 2 KV isolation protection
NPort 5430
Make Up to 4 RS-232 or RS-422/485
Serial Devices Internet Ready
The NPort 5400 series provides a convenient and transparent NPort 5400 series can transparently transmit data bi-direc-
way to connect serial devices to an Ethernet, with basic tionally between the serial and Ethernet interfaces.You can
configuration all that’s needed to network your existing simultaneously centralize your serial device management
serial devices. Protect your current hardware investment, and distribute management hosts over the network.
but also ensure future network expandability. Moreover,the
Easy-to-use Serial Device Server
The built-in LCM human-machine interface displays all con- and gateway address. Furthermore, you can also monitor
figuration parameters,and includes 4 buttons for inputting server status and data transmission, eliminating the need
data, or for selecting the operation mode, making it easy to prepare additional PCs during installation.
to set up server parameters,including IP address,netmask,
Real COM/TTY Port
The NPort 5400 series works like an add-on multiport the Windows operating system, or Real TTY ports by Linux
serial board to the Windows host, but with one major environments. Basic transmit/receive data functions are
advantage—the TCP/IP network.
provided, as well as RTS, CTS, DTR, DSR, and DCD (input)
With NPort’s Real COM/TTY drivers,the serial ports on NPort control signals.
5400 series products are recognized as Real COM ports by
4 Independent Serial Ports Can be Configured
for Different Operation Modes
Versatile operation is ensured since different modes can be network. For example, you can configure NPort 5400’s port
used for different serial ports.NPort 5400 Series products are 1 for driver mode, port 2 for TCP server mode, and ports 3
suitable for connnecting different devices for remote data and 4 for TCP client mode.
polling, event handling, or data multicasting via the TCP/IP
2-8
Serial Device Server Solutions
An Amazingly Simple and Exquisite Device Server
Power input
Terminal block 12-48 VDC
Ethernet
RJ45 10/100 Mbps
Reset Button
LEDs
LAN and Serial status
LCM Display Panel
Push Button
DB9 Male connector
RS-232 with 15 KV ESD protection
DIN-Rail or Panel mounting
Optional DIN-Rail (35 mm) Mounting Kit
Specifications
LAN
Built-in HMI
Power Requirments
Ethernet: 10/100 Mbps, RJ45
Protection: Built-in 1.5 KV magnetic
isolation
Serial
Interface:
LCM display with four push buttons
Built-in Buzzer
Power Input: 12 to 48 VDC
Power Consumption:
Built-in Real Time Clock
Built-in Watch Dog Timer
Serial Communication Parameters
Parity: None, Even, Odd, Space, Mark
Data bits: 5, 6, 7, 8
5410: 385 mA (at 12V max.)
5430: 380 mA (at 12V max.)
5430I: 600 mA (at 12V max.)
Mechanical Specifications
Material: SECC sheet metal (0.8 mm)
Gross Weight:
5410: 0.5 kg (1.10 lb)
5430: 0.5 kg (1.10 lb)
5430I: 0.5 kg (1.10 lb)
NPort 5410:
RS-232, DB9 Male
RS-232:TxD, RxD, RTS, CTS,
DTR, DSR, GND
NPort 5430, NPort 5430I:
RS-422:Tx+,Tx-, Rx+, Rx-, GND
Stop bit: 1, 1.5, 2
Flow control: RTS/CTS, XON/XOFF
Speed: 50 bps to 230.4 Kbps
Software Features
RS-485 (4-wire):Tx+,Tx-, Rx+, Rx-, GND Protocols: ICMP, IP,TCP, UDP, DHCP,
Environmental
RS-485 (2-wire): Data+, Data-, GND
Serial line protection:
15 KV ESD for all signals
2 KV Isolation for NPort 5430I
Power Line protection:
BootP,Telnet, DNS, SNMP, HTTP, SMTP,
SNTP
Utilities: NPort Administrator for
Windows 95/98/ME/NT/2000/XP
Operating Temperature:
0 to 55˚C (32 to 131˚F), 5 to 95% RH
Storage Temperature:
-20 to 85˚C (-4 to 185˚F), 5 to 95% RH
Real COM/TTY Drivers: Windows 95/ Agency Approvals
4 KV Burst (EFT), EN61000-4-4
2 KV Surge, EN61000-4-5
98/ME/NT/2000/XP Real COM drivers,
Linux real tty driver
EMC: FCC Class A, CE Class A
Safety: UL, CUL,TÜV
RS-485 data direction: Patented
Automatic Data Direction Control
Configuration: Web browser, telnet
console, or Windows utility
(ADDCTM
)
2-10
Total Solution for Industrial Device Networking
4-Port RS-232 or RS-422/485 Serial Device Server
Ease Your Installation with the User
Friendly LCM Display Panel
NPort 5400 series products have 4 push buttons for inputting data and
for selecting the operation mode.The LCM display panel first shows the
“Server Name,”“Serial Number,” and “IP Address.” Use the LCM display
panel and push buttons to configure the IP address, netmask, gateway,
as well as all other parameters quickly and easily.
Dimensions
Unit: mm (inch)
NPort 5410’s Pin Assignment
1 2 3 4 5
6 7 8 9
Pin
RS-232
1
2
3
4
5
6
7
8
9
DCD (in)
RxD (in)
TxD (out)
DTR (out)
GND
DSR (in)
RTS (out)
CTS (in)
---
Ordering Information
NPort 5410: 4-Port RS-232 Serial
All Items include:
• 4-port serial device server
Optional Accessory
DK-35A: DIN-Rail Mounting Kit
(35 mm)
Device Server
NPort 5430: 4-Port RS-422/485 Serial • Quick Installation Guide
Device Server
NPort 5430I: NPort 5430 with 2 KV
isolation
• NPort Document and Software
CD-ROM
2-11
|