Issued January 2006 • Index No. DC/9.8
Multiple Arc
Welding System
Mark VI
Heavy Industrial Applications
Processes
Voltage Range CC: 20–315 A
CV: 10–30 V (with CC/CV Module)
Construction
Rental Fleets
Fab Shops
Stick (SMAW) CC
TIG (GTAW) CC
Max. Open-Circuit Voltage
Quick
Air Carbon Arc (CAC-A)
Cutting and Gouging CC
Flux Cored (FCAW) CV
MIG Spray Transfer (GMAW)
with Voltage-Sensing Feeder CV
CC: 75 VDC CV: 38 VDC
Petro Chemical
Shipbuilding
Training Facilities
Maintenance
CC/CV Low OCV Module: 26 VDC 2 V
Specs
Weight Mark VI: 1725 lb (784 kg)
Mark VI-2: 1575 lb (718 kg)
®
The Power of Blue.
Adjustable arc control lets you get in
tight without sticking the electrode. An
electrode compensation circuit ensures
arc control performance regardless of
the electrode size.
Multiple capabilities CC or CC/CV.
Versatility and outstanding arc
welding performances in both CV
(MIG) and CC (TIG and Stick). The
CC/CV module has a high quality
arc for welding with cored wires.
Miller does not recommend that
the CC/CV module be used for short
circuit transfer MIG welding. The CC
module has the same great arc
characteristic as the Gold Star 302.
Hot Start™ makes it easy to start difficult-
to-start Stick electrodes, such as E-6010
and E-7018.
Line voltage compensation keeps
output power constant even if primary
input power varies by 10%, ensuring
consistent weld performance.
Rugged and durable enclosure
steel frame protects system.
Operator identification label helps
operators remember who is using
which module.
Capable of four to six welding arcs,
Miller’s unique modules are designed
for easy removal and connection.
If you need only four arcs today,
purchase the Mark VI-2. If you
have a requirement for more arcs,
additional modules (CC or CV)
are available for purchase.
60 Hz models have two 115 V GFCI duplex
receptacles which supply 15 amps of
auxiliary power. 50 Hz models have one
220 V and one 115 V duplex receptacle.
14-pin receptacle provides quick, direct
connection to Miller wire feeders and
accessories.
Optional Low OCV in CC/CV modules reduces maximum
open-circuit voltage to 26 volts in CC and CV modes when
not welding.
Weighs less than one ton which
makes it portable when secured on a
flatbed, construction truck, or when
moved by one-ton hoist. Fits through
36 in (914 mm) door opening.
Work connections are electrically isolated
from the frame, and service panels in
chassis provide easy access to internal
parts for routine maintenance.
Welder is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
International Headquarters Web Site
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Performance Data
(continued)
50 Hz DUTY CYCLE CHART
60 Hz DUTY CYCLE CHART
2000
1800
1600
1400
1200
1000
2000
1800
1600
1400
1200
1000
800
600
300
800
300
Total Machine Output
750 A at 60% Duty Cycle
Total Machine Output
750 A at 100% Duty Cycle
200
Each Module Output
194 A at 100% Duty Cycle
Each Module Output
194 A at 100% Duty Cycle
200
100
100
10
20
30
40
50 60 70 80 90 100
10
20
30
40
50 60 70 80 90 100
% DUTY CYCLE
% DUTY CYCLE
Genuine Miller Accessories
Process Selector Control #042 872
Allows you to easily change weld processes
without changing cables—from MIG to TIG
or TIG to Stick. Also for use with dual wire
feeders and applications where electrical
isolation and/or polarity reversing of weld
current is required.
Wire Feeders
Remote Controls and Switches
Stick Hook-up Kit
RFCS-14 Foot Control #043 554
Heavy-duty foot current and contactor
control. Includes 20 ft (6 m) cord and
14-pin plug.
#173 851 50 ft (15.2 m) 2/0 cable
Includes electrode holder, weld cable
and work cable with clamp.
™
SuitCase 8RC #194 938
™
SuitCase 12RC #194 940
Compact, portable, constant-speed wire
feeder with remote voltage control. For
MIG Hook-Up Kit
.030 – 5/64 in (0.8 – 2 mm) hard and flux
cored wires. Holds up to an 8 in, 14 lb (8RC)
or 12 in, 44 lb (12RC) spool of wire.
See Lit. Index No. M/6.5.
#173 856 25 ft (7.6 m) 2/0 cable
Includes gas hose assembly, lugged weld
cable assembly and work cable with clamp.
RCC-14 Remote Contactor and
Current Control #151 086
Rotary-motion fingertip control. Fastens to
TIG torch using two Velcro strips. Allows
complete current and contactor control at
operator’s fingertips. Includes 28 ft (8.5 m)
cord and plug.
™
SuitCase 8VS Wire Feeder #194 890
™
™
SuitCase X-TREME 12VS
HF-251D-1 High-Frequency Arc
Starter/Stabilizer #042 388
Wire Feeder #195 500
Lightweight, portable, voltage-sensing
wire feeders include secondary contactor
and gas valve. Require drive roll kit.
See Lit. Index Nos. M/6.4 and M/6.41.
This portable 250 A, 60% duty cycle unit
adds high frequency to the welding circuit to
help start the arc when using the TIG (GTAW)
process. Operates on 115 VAC 50/60/100 Hz.
See Lit. Index No. AY/5.1.
RCCS-14 Remote Contactor and
Current Control #043 688
Up-and-down rotary-motion fingertip
control. Great for applications that require
a finer amperage control. Includes 28 ft
(8.5 m) control cord.
3
Genuine Miller Accessories
Remote Controls and Switches
(continued)
Extension Cables for 14-Pin Plugs to
14-Pin Sockets
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
Extension cords make a direct connection
between the power source and the
accessory control. No messy splicing or
adapting required.
RHC-14 Hand Control
#129 340
Miniature hand control
for remote current and
contactor control.
RMLS-14 #129 337
Momentary- and maintained-contact rocker
switch for contactor control. Push forward
for maintained contact and back for momen-
tary contact. Includes 20 ft (6 m) cord and
14-pin plug.
Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x
82 mm). Includes 20 ft (6 m) cord and
14-pin plug.
Ordering Information
Power Source and Options
Stock No.
#903 588
Description
230/460/575 V, 60 Hz
Qty.
Price
Mark VI-2 (Four Modules)
#903 588-01-1 With Tweco connectors
Mark VI CC (Six Modules)
#903 512
#903 569
230/460/575 V, 60 Hz
380/400/415/440-460 V, 50/60 Hz
Mark VI CC/CV (Six Modules)
#903 645
#903 660
230/460/575 V, 60 Hz
380/400/415/440–460 V, 50/60 Hz
#903 645-01-1 Low OCV modules
#903 645-02-1 With Cam-Lok connectors and Low OCV
Single CC Module
#903 661
CC module, 50/60 Hz
Single CC/CV Modules
#903 646
#903 659
#903 899
CC/CV module, 60 Hz
CC/CV module, 50/60 Hz
CC/CV, Low OCV modules
Stick Accessories
Stick Hook-up Kit
Stick Electrodes
#173 851
#042 388
2/0 cable, 50 ft. Includes electrode holder, weld cable and work cable with clamp
HF arc starter/stabilizer
TIG Accessories
HF-251D-1
Torch and Consumables
Tungsten
MIG Accessories
SuitCase™ 8RC
#194 938
#194 940
#194 890
#195 500
#173 856
See Lit. Index No. M/6.5
See Lit. Index No. M/6.5
See Lit. Index No. M/6.4
See Lit. Index No. M/6.41
SuitCase™ 12RC
SuitCase™ 8VS
SuitCase™ X-TREME™ 12VS
MIG Hook-Up Kit
2/0 cable, 25 ft. Includes gas hose, weld cable, work cable w/ clamp, and regulator/flowmeter
Remote Controls
RFCS-14
RCC-14
RCCS-14
RHC-14
#043 554
#151 086
#043 688
#129 340
#129 337
Foot control
Fingertip control
Fingertip control
Hand control
RMLS-14
Momentary- and maintained-contact switch
Extension Cords
#122 973
#122 974
#122 975
25 ft (7.6 m)
50 ft (15.2 m)
75 ft (22.9 m)
Miscellaneous
Process Selector Control
Primary Power Cord
Gas Cylinder
#042 872
Gas Hose and Fittings
Date:
Total Quoted Price:
Distributed by:
Litho in USA
|