Product and Cut-out Dimensions
Page 1 of 5
K 1901 Vi 36” Refrigerator (Integrated, right-hinge)
O
E
W
Caution
The appliance is very heavy.
Use caution when unpacking
and opening the door, danger
of tipping.
Location Codes
E- 5 foot – 120 Volt – 15 A 3-wire molded plug power supply connects lower left rear.
O- Standard NEMA 5-15 Outlet – locate less than 9” above finished floor
W- ¼” flexible water line – tape to floor (F1911Vi only)
Notes
Merging kit 38996010USA KSK1002 Side-by-side kit must be used when combining units. (Please review the manual)
RemoteVision Module needs to be installed prior to install.
All installations must be done in accordance with local codes.
Sides of adjoining cabinets should be filled (flush to frame) to insure proper fit and finish.
Drawing is not to scale
Specification Sheets OJS 11112011
Product and Cut-out Dimensions
Page 3 of 5
K 1901 Vi 36” Refrigerator (Integrated, right-hinge)
Door hinge cabinet front and door panel thickness dimensions, stop pinned at 90°
(refrigeration only) and fully opened at 115°.
Refrigeration only.
Greater door swing lower cabinet front thickness
Notes
The dimensions of the door fronts and handles will vary according to each individual kitchen.
Drawing is not to scale Specification Sheets OJS 11112011
Product and Cut-out Dimensions
Page 4 of 5
K 1901 Vi 36” Refrigerator (Integrated, right-hinge)
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale
Specification Sheets OJS 11112011
Product and Cut-out Dimensions
Page 5 of 5
90° Door pin to be used only with refrigerator when necessary
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale
Specification Sheets OJS 11112011
|