H 6180 BP
H 6180 BP
–
Do not dispose of this appliance with
your household waste.
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Before discarding an old appliance
ensure that it presents no danger to
children while being stored for disposal.
Unplug it from the outlet, cut off its
power cord and remove any doors to
prevent hazards.
75
CAUTION:
Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually "tripping" the circuit
breaker.
The oven is equipped with a power
cord approx. 7' 2" (2.2 m) in length with
a NEMA 14-30 P plug ready for
connection to the power supply:
– 120/208 V, 30 A, 60 Hz
or
Installation, repair and maintenance
work must be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.
– 120/240 V, 30 A, 60 Hz
The voltage can be adjusted (see
"Settings - ").
'
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
(NEMA 14-30P, L1, L2, N, G, 30 amp
208/240 VAC)
Only operate the appliance after it
has been installed into cabinetry.
The plug must be plugged into an
appropriate outlet that is installed
and grounded in accordance with all
local codes and ordinances.
76
Miele ovens can be installed flush or proud. Discuss your installation
requirements with your architect, designer and installer.
24"
28 1/4"
(610 mm)
(718 mm)
23 3/4" (603 mm)
16 15/16" (430 mm)
28 7/16"
(722 mm)
4"
(100 mm)
28 1/2"
(724 mm)
26 3/8"
(670 mm)
28 5/8"
(727 mm)
27 13/16"
(707 mm)
29 13/16"
(757 mm)
7/8" (22*/23** mm)
Cut-out (4" x 28" / 100 mm x 720 mm) in the bottom of the cabinet for power
cord and ventilation
Power cord with plug
*
Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.
! Please note: For flush mount installations, please take the depth and location of the electrical utility box
into consideration prior to planning your design. For more information please contact our Customer Care
Centre. !
77
24"
(610 mm)
28 1/4"
(718 mm)
23 3/4" (603 mm)
4"
(100 mm)
16 15/16" (430 mm)
28 7/16"
(722 mm)
28 1/2"
(724 mm)
26 3/8"
(670 mm)
28 5/8"
(727 mm)
27 13/16"
(707 mm)
29 13/16"
(757 mm)
7/8" (22*/23** mm)
Cut-out (4" x 28" / 100 mm x 720 mm) in the bottom of the cabinet for power
cord and ventilation
Power cord with plug
*
Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.
78
It is recommended that you remove
the door before installing the
The oven must not be operated
until it has been properly installed
within cabinetry.
appliance (see "Cleaning and Care -
Removing the door") and all oven
accessories from the cavity. This will
make for easier installation into the
niche and will not tempt you to use
the handle to carry it.
The oven must have an adequate
supply of cool air for proper
operation. The required air must not
be heated excessively by other heat
sources, e.g. wood burning stove.
If there are side handles, please
remove them.
Observe the following when
installing:
Build into cabinetry with no back
wall.
Make sure that the shelf that the
appliance sits on does not touch the
wall.
Push the oven into the cabinetry and
align it.
Open the door (if it was not removed
previously).
Do not install insulation strops on the
side walls of the cabinet housing.
Before connecting the oven to the
power supply, first disconnect the
power supply from the oven isolator
switch.
Connect the power cord to the
Use the supplied screws to secure
the oven to the side walls of the
cabinetry through the holes in the
trim.
electrical supply.
Do not carry the oven by the door
handle. The door can be damaged.
Use the handles on each side of the
oven to carry it.
Reinstall the door, if necessary (see
"Cleaning and care - Installing the
door").
79
Please have the model and serial number
of your appliance available before
contacting Technical Service.
U.S.A.
Canada
Miele, Inc.
Importer
Miele Limited
National Headquarters
9 Independence Way
Princeton, NJ 08540
Headquarters and Miele Centre
161 Four Valley Drive
Vaughan, ON L4K 4V8
800-843-7231
609-419-9898
609-419-4298
Phone:
Fax:
Customer Care Centre
Phone:
800-565-6435
905-532-2272
Technical Service & Support
Nationwide
800-999-1360
888-586-8056
Phone:
Fax:
Germany
Manufacturer
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
80
H6180BP; H6280BP
–
|