8
Switch Settings, Adjustments and Indicators
Marshall Electronics
Tally Indicators
1910 East Maple Ave.
El Segundo, CA 90245
Illuminate when active
Input 1: 525i/60Hz 4x3
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
Email: [email protected]
Note: Tapping any active
input signal toggles BLUE
GUN On/Off. Signal selection
is active when Blue Gun is
on. Tap active selection to
turn off.
Dry Erase Label
Image Adjustment Controls
Note: Tint only functions when NTSC
Video or S-Video are selected
Power On/Off switch
Illu
s
Screen aspect ratio switch 4:3 or 16:9 selector and indicators
Ill
wh
Pixel to Pixel On/Off
Lights when active
V-R82DPP-HDSDI
Blue Gun, On/Off
Lights when active
Users Guide
4:3 Aspect
16:9 Aspect
9
Pixel to Pixel Function
As the native LCD display is 800 pixels wide by 600 pixels high, it is necessary to change the size of the image to fill the whole screen. Pixel to Pixel mode bypasses
the enlargement or scaling function and displays the native incoming format.
For 625/525- based images, pixel to pixel will appear as a 480x640 (4:3 aspect) or 480x720 (16:9 aspect) display.
For 720P/1080i/1080P based images, pixel to pixel will appear as an enlargement displaying the center 800x600 pixel grouping.
10
Menu Functions
Turn On/Off with Menu button.
Use Up (P-P), Dn (Blue), and Select (Ratio) for menu navigation functions.
Color Temperature – Select D65 or User. User mode will automatically be turned on if Gain or Bias are adjusted.
Adj Color Gain – Select to adjust RGB gains. Adj Color Bias – Select to adjust RGB bias
OSD – Toggle OSD on/off. Version Number – Display only
Gain Adjustment
Press Up (P-P), Dn (Blue), to navigate.
Press Select (Ratio) to activate.
Press Select to toggle R, G, or B
Press Up, Dn, to change value.
Press Menu to exit
Chart legend: Left Line
= Increase of gain
Center Line = D65 (Default)
Right Line = Decrease of gain
Product Overview
Features
1
2
3
Bias Adjustment
Chart legend: Right Line = Increase of Bias
Center Line = D65 (Default)
Press Up (P-P), Dn (Blue), to navigate.
Press Select (Ratio) to activate.
Press Select to toggle R, G, or B
Press Up, Dn, to change value.
Press Menu to exit
Electrical Specifications
Mechanical Specifications
Digital Screen Formats and Frame Rates
Operational Setup
Left Line = Decrease of Bias
4
5
6
OSD Adjustment
Press Up (P-P), Dn (Blue), to navigate.
Press Select (Ratio) to toggle OSD On/Off
Connectors
7
8
9
10
11
11
Warranty
Switch Settings, Adjustments and Indicators
Pixel to Pixel Function
Menu Functions
Marshall Electronics warranties to the first consumer, that this V-R82DP-HDSDI Dual 8.4-inch LCD rack mounted monitor set will, under normal use, be free from
defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with
a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construction,
voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the
duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing
area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.
Due to constant effort to improve products and product features, specifications may change without notice.
Warranty
|