Model MF-46
MARK OF FITNESS FIVE YEAR WARRANTY
-U.S. Customers Only-
CONTENTS
Page
Page
WRAPPING THE CUFF . . . . . . . . . . . . . . . . . . 12
MEASUREMENT PROCEDURES . . . . . . . . . . . 13
MEMORY FUNCTIONS . . . . . . . . . . . . . . . . . . 13
DELETING STORED DATA . . . . . . . . . . . . . . . . 14
CARE AND MAINTENANCE . . . . . . . . . . . . . . 14
ERROR DISPLAYS AND TROUBLESHOOTING . . 15
Mark of Fitness, Inc., warrants this product to be free of defects in material and workmanship for a period of five years,
except cuff which has one year warranty.
Should any defects be discovered within five years of purchase, Mark of Fitness, Inc. will repair the defective product or parts
at no charge for labor or materials provided:
1. Said unit is returned postage paid to the factory for servicing, marked Attn: Service Department.
2. Proof of date of purchase is included with the product.
3. A letter accompanies the product and indicates the complaint or defect to be remedied.
4. A check or money order in the amount of $7.95 is included to cover the shipping and handling costs.
In the event the defect may be remedied without returning the unit, contact the firm by phone or mail first, and every effort
will be made to supply the replacement parts quickly and at no charge.
BASIC PRODUCT INFORMATION . . . . . . . . . . . 9
PRECAUTIONS FOR USE . . . . . . . . . . . . . . . . 10
TIPS ON TAKING YOUR BLOOD PRESSURE . . 10
IN STRUCTIO N S
EN GLISH
INSTALLING BATTERIES AND SETTING THE
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CORRECT MEASURING POSTURE . . . . . . . . . 12
This warranty does not apply to any unit that has been tampered with, abused, accidentally damaged or to damage incurred
through improper packing and mishandling in transit to or from the factory.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
IN STRUCTIO N S
EN GLISH
IN STRUCTIO N S
EN GLISH
Mark of Fitness, Inc.
621 Shrewsbury Avenue
Shrewsbury, New Jersey 07702
MAN UAL DE IN STRUÇO ES
Phone (732) 842-7200 Fax (732) 842-0558
Customer Service (888) 343-1558
PO RTUGUÊS
e-mail custserv@markfit.com
web site www.markoffitness.com
Download from Www.Somanuals.com. All MAa1n1XuXXaX-l1sA Search And Download.
13
14
3
MINUTE
MINUTE
MINUTOS
MINUTO
fig.2
fig.4
CORRECT MEASURING POSTURE p.12
POSTURA CORRECTA DE MEDICIÓN p.X
POSTURE DE MESURE p.X
POSTURA CORRECTA PARA MEDIÇÃO p.X
MEASUREMENT PROCEDURES p.13
CÓMO EFECTUAR LA MEDICIÓN p.X
MÉTHODE DE MESURE p.X
PROCEDIMENTOS DE MEDIÇÃO p.X
1
2
11
5
fig.3
WRAPPING THE CUFF p.12
COLOCACIÓN DEL BRAZALETE p.X
ENROULEMENT DU BRASSARD p.X
COLOCAÇÃO DA BANDA p.X
1
2
3
4
SYS
mmHg
DIA
mmHg
PUL
/min
1 inch
MEMORY BANK NUMBER
NUMÉRO INUTILISÉ DE LA
MÉMOIRE
NÚMERO DE BANCO DE MEMORIA
NÚMERO DO BANCO DE MEMÓRIA
- 4 -
- 5 -
fig.5
fig.6
MEMORY FUNCTIONS p.13
FUNCIONES DE MEMORIA p.X
FONCTIONNEMENT DE LA MÉMOIRE p.X
FUNÇÕES DA MEMÓRIA p.X
DELETING STORED DATA p.14
Average
number of total
stored data
1
2
1
2
1
2
SYS
moyenne
mmHg
Media
DIA
mmHg
médio
PUL
/min
MEMORY DATA NUMBER
NO. DES DONNÉES DE LA MÉMOIRE
NÚMERO DE REGISTRO DE MEMORIA
NUMERO DO RESULTADO
HEURE
HORA
TEMPO
latest data
Dernières données
medición más reciente
Últimos dados
DATE
FECHA
DATA
3
4
Oldest data
Données les plus anciennes
Dato más antiguo
Dados mais antigos
2nd latest data
30
30
Avant-dernières données
2º medición más reciente
Penúltimos dados
- 6 -
- 7 -
BASIC PRODUCT INFORMATION
This manual is intended to assist the user in the safe and efficient operation pressure against the cuff produced by the expansion and contraction of the
of the Model MF-46 Digital Blood Pressure Monitor. The product must be arteries in the arm in response to each heart beat. The amplitude of each
used in accordance with the procedures contained in this manual and pressure wave is measured, converted to millimeters of mercury, and
must not be used for purposes other than those described herein. It is displayed on the LCD as a digital value. Memory circuit stores the 30
important to read and understand the entire manual. In particular, please most recent measurement results for comparison.
read carefully and become familiar with the section entitled “TIPS ON
TAKING YOUR BLOOD PRESSURE”.
Accuracy was evaluated during clinical studies in which results with the MF-
46 system were compared with simultaneous auscultatory measurements
obtained with a standard sphygmomanometer. In these studies, the onset
The user is cautioned that the system may fail to yield specified measurement
accuracy if operated or stored in temperature or humidity conditions outside of the fourth (or fifth) Korotkoff sound was taken as the diastolic pressure
the limits stated in the specifications section of this manual. Also, an for the purpose of determining overall efficacy. A copy of this study is available
inaccurate reading may result if this instrument is used on a child's arm.
Consult your physician if you wish to take a child's blood pressure.
from the manufacturer on request. To insure that accuracy is maintained,
compare readings obtained with the MF-46 system with values measured
by a trained observer using a manual sphygmomanometer at least every
6 months.
Indications for Use
The MF-46 system is intended for the non-invasive measurement of systolic
and diastolic blood pressure and determination of heart rate in adult patients,
Blood pressure measurements determined with this device are equivalent
i.e., age 15 and above. The product is recommended for use by patients to those obtained by a trained observer using the cuff stethoscope
with labile blood pressure or known hypertension in a home care environment auscultation method, within the limits prescribed by the American National
as an adjunct to medical management. The cuff will accommodate an Standard, Electronic or Automated Sphygmomanometers.
upper arm circumference range of approximately 8.7 to 12.6 inches (22 The MF-46 system has the ability to function according to its specifications
to 32 centimeters). Pressure is measured over a range of 0 to 300 mmHg in the presence of common arrhythmias such as atrial or ventricular
and heart rate over a range of 40 to 160 beats/minute.
premature beats or atrial fibrillation.
Method of Measurement
This product employs the oscillometric method for measurement of blood
pressure and heart rate. The cuff is connected to the main unit and wrapped
CAUTION!
Do not use cuffs other than the original cuff
around the arm. Circuits within the monitor sense the small oscillations in included with this product.
SPECIFICATIONS
Model
: MF-46
Power Consumption : 4W (max.)
Memory : 30 measurement results x 2, computation
of the average of stored Data
Operating Principle
Indicator
: Oscillometric method
: 13 digits LCD display
Operating environment : +50˚F to+104˚F, 15 to 90% relative humidity
Storage environment : -4˚F to+122˚F, 15 to 95% relative humidity
Pressure indicating Range : 0 to 300 mmHg (Cuff pressure)
Measuring Range
: 50 to 250 mmHg (systolic)
40 to 180 mmHg (diastolic)
40 to 160 pulse/min. (pulse rate)
Cuff
: Coverage arm circumference ; 8.7 to 12.6 in.
[22 to 32 cm]
Accuracy
: ±3 mmHg (Cuff pressure)
±5% of reading (pulse rate)
Main Unit
: Weight ;Approx. 13.4 oz. [370 g] (without
batteries)
Size ; 6.4 x 7 x 3.2 in [163 x 180 x 83 mm]
(W x D x H) when CUFF HOLDER attached
Inflation
: Automatic inflation
Deflation
Exhaust
: Electric control valve
: Automatic exhaust valve
Power Supply
: 4 pcs. 1.5 volt "AA" (R6P/LR6) type batteries
or AC adapter
Specifications are subject to change without notice due to improvements
in performance.
- 9 -
1
14
Refer to "PARTS NAMES AND PRODUCT COMPONENTS" on page 2 for circled numbers:
~
PRECAUTIONS FOR USE
TIPS ON TAKING YOUR BLOOD PRESSURE
Do not use this instrument without consultation with your doctor if you are under dialysis
therapy or on anticoagulants, antiplatelets or steroids. Use of this instrument under such
conditions could cause internal bleeding.
Take blood pressure measurement with the correct posture and do not move nor
speak during measurement.
Avoid exercise, eating, drinking alcohol, smoking and other activities that affect your
blood pressure right before a measurement.
To avoid any possibility of accidental strangulation, keep this unit away from children and
10
do not drape AIR HOSE around your neck.
Take your blood pressure every day at the same time.
For specific information on your blood pressure, contact your physician. Never make any
judgment on measurement results on your own.
The ambient temperature sould be approximately 68˚F (20˚C) when you take your
blood pressure.
Use of this device in areas near portable phones, microwave ovens or other devices with
strong electromagnetic field may cause malfunctions.
page 3
INSTALLING BATTERIES AND SETTING THE CLOCK
see fig.1
TIPS ON TAKING YOUR BLOOD PRESSURE
7
1
2
3
Turn the unit over and remove CUFF HOLDER
from the unit.
CAUTION! Do not use rechargeable
batteries.
Blood pressure changes shown below.
Blood pressure is a measurement of the force exerted by the heart in pumping the blood
through the arteries and the resistance by the veins in this flow.
Blood pressure changes easily as influenced by mental and physical factors
and is never constant.
Upper arm blood pressure date.
Open the battery cover.
200
180
Systolic
Never forcefully remove CUFF HOLDER or the battery cover.
160
Diastolic
battery replacement indication
140
120
100
80
Causes for Changes in Blood Pressure
Install four “AA” type batteries into the
compartment as indicated. Make sure that the
polarities correspond to the (+) and (-) marks.
Replace all the batteries when the battery replacement
indication appears on the display or nothing is displayed
• Body movement
• Drinking Alcohol
• Temperature
• Conversation
• Smoking
• Mental Tension
• Recent Urination or Bowel Movement
• Emotions • Meals
60
40
2
even if ON/OFF BUTTON is depressed.
20
12 13 14 15 16 17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
9
10 11
• Changes in the surroundings such as movement or noise, etc.
Time
In general, blood pressure is highest during the working hours and gradually decreases during
the afternoon and evening hours. It is low during sleep and slowly increases at a relatively fast
rate after arising from bed.
Blood pressure measured at home tends to be lower than when measured
in a hospital, clinic or doctor's office.
When blood pressure is measured in a hospital, it could be higher than when measured at
home. This is because you are tense at the hospital and relaxed at home. It is important to
know your stable normal blood pressure at home.
Let a qualified physician interpret your blood pressure readings.
Depending on your age, weight and general condition, blood pressure can be slightly different.
Consult with your doctor on determining what blood pressure is normal for you.
Close the battery compartment cover.
Year flashes on the display.
Use alkaline batteries to increase battery life. Use of regular Carbon-
Zinc batteries will necessitate more frequent replacement. The
enclosed batteries are for monitoring, and their life may be shorter
than that of commercial batteries.
4
(severe)
180~
(moderate)
(mild)
160~179
140~159
130~139
120~129
Clock can be set only after the batteries are reinstalled. Adjust the
clock so that measurement results are stored with correct date and
time.
Since neither the device nor batteries are household
waste, follow your local recycling rules and dispose
of them at appropriate collection sites.
High Normal
Normal
3
5
6
Use M1 to increase the flashing number
~120
4
and M2
to decrease the number.
Operation with an AC adapter
6
AC ADAPTER JACK is located on
2
Press ON/OFF BUTTON to confirm and move
to next step.
SYS
80 85 90 100 110
84 89 99 109
mmHg
the right side of the unit. Do not
use any adapters other than
the one specified below.
80
DIA
Blood pressure classification by WHO (1999)
Month flashes.
Specifications of the AC adapter to be selected are:
Rest for approximately five minutes and take your blood pressure while relaxed in a
quiet environment.
7
8
Adjust month with M1 and M2 buttons.
Press ON/OFF BUTTON and day flashes.
Output voltage
Input voltage range : Standard voltage ±15%
Maximum electric load : 600mA or higher
: 6 VDC ±5%
- 10 -
- 11 -
1
14
Refer to "PARTS NAMES AND PRODUCT COMPONENTS" on page 2 for circled numbers:
~
page 5
INSTALLING BATTERIES AND SETTING THE CLOCK
MEASUREMENT PROCEDURES
see fig.4
Output plug polarity : Center Negative
9
Adjust day with M1 and M2 buttons.
Take deep breaths and relax.
Do not move, chat or strain your arm or hand
during measurement.
Stopping Measurement
Press ON/OFF BUTTON
monitor will stop inflation, discharge
air rapidly, and then turn off.
Output plug shape
: External diameter
: Internal diameter
: Length
5.5ø±0.1 mm
2.1ø±0.1 mm
9.5±0.3 mm
10 Press ON/OFF BUTTON and hour flashes.
2
and the
The clock operates in 24-hour mode.
An approved adapter is the RadioShack PN 273-1761, with
adaptaplug "M" PN 273-1716.
11 Adjust with M1 and M2 buttons.
12 Press ON/OFF BUTTON and minute flashes.
13 Adjust with M1 and M2 buttons.
1
2
11
5
Insert TUBE PLUG into AIR CONNECTOR .
Remove the batteries when operating the
unit with AC adapter for extended period
of time.
2
Press ON/OFF BUTTON
.
Do not take repeated measurements.
blood can be forced into tissues
beyond the cuff, which would result
in incorrect measurements. Let your
arm rest for at least 5 minutes.
Beep sounds and the monitor automatically starts inflation.
The inflation stops as beep sounds and the displayed value (pressure)
decreases.
14 Press ON/OFF BUTTON, the clock is set and
the unit is turned off.
When batteries are removed or AC adapter is
unplugged, the clock returns to the default
value.
The pulse is indicated by heart mark " " with synchronizing beep.
The clock is displayed while the unit is turned off.
Long beep sounds as the measurement
completes and maximum and minimum
blood pressures and pulse rate are displayed.
Deflation mark appears and the unit automatically exhausts the air
from the cuff.
page 4
CORRECT MEASURING POSTURE
see fig.2
Automatic Repressurization
If the pressure applied is judged insufficient in the early
phase of measurement or if movement of arm or hand
occurs during measurement, the unit will inflate again to a
level about 40 mmHg higher. Automatic Repressurization
is repeated until a measurement is made. However, this
does not indicate a problem.
To manually control pressurization, hold down ON/OFF
BUTTON immediately after the start of inflation and
release it when the pressure reaches the level 50 mmHg
higher than the expected maximum systolic pressure. If
the pressure value has exceeded 180 mmHg, the inflation
will stop when the key is released. Pressure can be
increased to approximately 300 mmHg.
Sit at the table and let the table support your arm as you take the blood pressure measurement.
Make sure that the measurement location on the upper arm is at approximately the same height as the heart,
and that the forearm is extended naturally on the table and does not move.
You may lie on your back and take the measurement. Look at the ceiling, stay calm, and do not move your neck or body during the
measurement. Again, make sure that the measurement location on the arm is at approximately the same height as the heart.
3
4
Press either one of MEMORY BUTTONs,
3
4
M1 or M2 , and the result is stored in
the selected bank.
The selected memory bank number is shown on the display. The
result is stored in the bank which is selected when the unit is turned
off. When a measurement resulted in an error, it will not be stored.
page 4
WRAPPING THE CUFF
see fig.3
Press ON/OFF BUTTON to turn off the power.
If you forget to turn off the unit, it will be automatically turned off
after 3 minutes.
1
2
3
With the tube of the cuff positioned in the direction of the fingertips, place it on your
left arm.
Wrap the cuff around the arm with the edge of the cuff approximately 1 inch (2.5 cm)
above the elbow.
page 6
MEMORY FUNCTIONS
see fig.5
Press the surface of the cuff to make sure that it is attached securely.
Measured result is stored in either M1 or M2. Each of two memory banks can hold up to 30 results and their average. When the number of
measurements exceeds 30, the oldest data will be deleted to record new data. You may decide which bank to store your measurement
results to avoid data mixture with someone else's, or may use two banks to save data measured in the morning and evening separately.
When wrapping the cuff, wrap it loosely enough around the arm so that two fingers can be placed between
the cuff and the arm. If the cuff is wrapped more tightly or loosely than this, inaccurate blood pressure
readings may result.
Recalling measured data
If you are wearing a shirt that might restrict circulation in your upper arm or you roll your sleeve up over
the upper arm, the blood flow will be restricted, preventing accurate measurement.
3
4
1
Press MEMORY BUTTON M1 or M2
to see stored data.
- 12 -
- 13 -
|