VS3002 HDMI Switcher
The number of source products and displays with HDMI in- and outputs are rapidly increasing
which requires more and more products that can handle these digital connections. Not having
enough HDMI inputs automatically limits you in using these digital connections. That’s were the
VS3002 steps in.
The VS3002 is designed to connect up to 6 HDMI sources and route them to a single HDMI output
connected to an LCD-screen or projector for instance. To prevent having to switch the output cable
manually, the VS3002 is equipped with 2 HDMI outputs.
Furthermore the VS3002 is equipped with an onboard signal equalizer that corrects the signal it
receives from the source products. This signal may become duller by the characteristic of the HDMI
cable connected between the two products and/or the cable length. The equalizer function re-shapes
the signal and outputs a high-quality HDMI signal.
VS3002 is fully HDCP compliant and can be controlled by the front panel, enclosed IR remote, RS-
232 or automatically, by linking it to an A/V receiver. Controlling is even easier by linking it via the
D-bus input to a Marantz receiver.
•
•
•
•
•
•
•
•
•
•
•
High reliability to pass through switching of HDMI TMDS signal.
6 inputs / 2 output HDMI ver1.3b selector.
Supports video resolutions up to 1080p , 60Hz ,12bit or 720p/1080i , 120Hz ,12-bit color depth.
2.25GHz video bandwidth for Deep Color.
Automatic Input Switching.
Select output signal emphasis to connected cable characteristic.
IR I/O and RS-232 for Flexible Control
Heavy-Duty All-Metal Construction
World wide power supply voltage (100-240 V)
Automatic IR-command function for marantz AVR and VP
Link to Marantz SR or VP products by RC5
Specifications
|