English
Français
EsPaÑOl
Integrated Amplifier
PM6005
Getting Started
Mise en route
Antes de empezar
Setup
Install batteries in the
remote control unit
There are six steps to the setup process.
1
Install batteries in the remote control unit
1
Connect the speakers to the amplifier
2
Connect the CD player to the amplifier
3
Plug the power cord into a power outlet
4
R03/AAA batteries
Turn the amplifier’s power on
5
Begin playback
6
2
Connect the speakers to the amplifier
2
Connecting the speaker cables
qPeel off about 3/8 inch (10 mm)
of sheathing from the tip of the
speaker cable, then either twist
the core wire tightly or apply
solder to it.
(R)
(L)
w
q
w
q
wTurn the speaker terminal
counterclockwise to loosen it.
eInsert the speaker cable’s core
wire to all the way into the
speaker terminal.
rTurn the speaker terminal
clockwise to tighten it.
3
Connect the CD player to the amplifier
3
L
R
CD player
AUDIO
OUT
L
R
L
R
4
Plug the power cord into a power outlet
4
Connect to household
power outlet
(AC 120 V, 60 Hz)
Power cord (supplied)
5
Turn the amplifier’s power on
5
1
Reduce the volume to the minimum level.
2
Press the power operation button.
1
2
6
Begin playback
6
1
2
Set the input source to “CD”.
Play the CD player.
1
3
1
3
Adjust the volume.
3
7
Owner’s Manual
The included CD-ROM contains an Adobe PDF version of the full owner’s manual for the amplifier.
Please reference this manual for more details about the setup and operation of the amplifier and it’s features.
1
2
Insert the disc into your PC.
Follow the screen or double click on the
PDF file.
8
D&M Holdings Inc.
Printed in China 5411 11112 00AM
|