Record(DVD)
Prepare 5.
After all the connections are complete,
connect the AC power cord.
4.
f
n
i
o
For more info,
please contact 1-800-605-8610
Press [DVD] first.
1
Insert a recordable disc (refer to page
26 in the Owner's Manual on how to
insert a disc).
1
Insert two Size AA (R6) batteries.
2
Manual
Please read the supplied Owner's
Manual for the detailed instructions.
Press [STANDBY-ON ] to turn on the unit.
Turn on your TV.
3
4
5
Align the disc to
the disc tray guide.
Press the button on the TV’s remote control
that accesses the external input channel
repeatedly until you see "Initial Setup"
menu. (Please refer to your TV’s owner's
manual.)
Press [REC MODE] repeatedly to
select a recording mode.
Quick Guide
2
3
Digital Video Disc Recorder & Video Cassette Recorder with Digital Tuner
ZV457MG9 A
Select the appropriate external input
channel by pressing [SOURCE] or
[CHANNEL / ].
Press [DTV/TV] to select analog TV or
digital TV, then use [CHANNEL / ]
or [the Number buttons] and [ • ] (for
digital TV channels) to select a
desired channel to record.
Antenna
Connection
Initial Setup
Select
2. 3.
Connect
Prepare
4. 5.
Record (DVD)
1.
OSD Language
English
Français
Español
Select the language for Setup display.
Antenna Connection
1.
If the TV is connected by an HDMI cable,
it may take a while for the "Initial Setup"
menu to come up.
Press [REC] to start recording.
4
5
Your TV
RF coaxial
cable
Use [K/L] to select your desired
language, then press [OK].
6
7
Press [STOP C] to stop recording.
OUT
ANT. IN
rear of this unit
Use [K/L] to select the type of
broadcasting signal, then press [OK].
The title list will appear automatically after
writing to a disc completes.
HDMI OUT
OUT
This connection is for
TV loop through only
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT
VIDEO OUT
IN
Y
L
L
Channel Preset
IN
ANTENNA
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN --- VIDEO---OUT
ANTENNA
Make sure the antenna is
connected to “ANTENNA IN” jack.
PR
/CR
R
e.g.) DVD+R
VHF / UHF
antenna
Antenna
Please finalize the disc when the writing is
completed before playing back on other DVD
players.
Cable (Analog)
Cable (Analog / Digital)
Writing to Disc
90%
“Auto Presetting Now”
or
RF coaxial
cable
If a PBS (public broadcasting station) is
available in your area, clock setting will
automatically be performed and the correct
clock will be displayed following the channel
preset procedure.
Initial setting is then complete.
Press [RETURN] to exit.
cable TV
company
• Press [STOP C] to exit the title list.
You will need to finalize DVD+R, DVD-RW
or DVD-R to play them back on other DVD
players. Refer to page 54 in the Owner's
Manual on how to finalize a disc.
If a PBS (public broadcasting station) is not
available in your area, press [OK]. Then
proceed to step 5 in "Manual Clock Setting"
on page 32 in the Owner's Manual.
E9S80UD
Printed in China
1VMN26714 ★★★★★
|