VE-120
6.Slide the Range Switch to the Long position if the
Remote Unit location is a long distance away; slide
the switch to the Short position if the Remote
Unit location is a short distance away
Specifica tions
Function
Connectors Input
O utput
VE-120L
15 pin HDB Male
15 pin HDB Female
RJ-45 Receptacle
1 Power
640 x 480 @ 130 m (430') - 1600 x 1200 @ 100 m (333')
VGA, SVGA, Multisync
Category 5 STP
VE-120R
RJ-45 Receptacle
15 pin HDB Female
VE-122
RJ-45 Receptacle
5 pin HDB Female
RJ-45 Receptacle
7.Plug the other end of the Category 5 twisted pair
LEDs
VGA Res
Signal Type
cable into the Remote Unit's Remote I/O port*
Note: See the Cable Length table in the Appendix
for typical resolution/refresh rate/distance
ratios.
Cable
Type
Distance 130 m (430')
Power Consumption
Housing
AC 9V 130mA (max.)
Metal
240 g
AC 9V 180mA (max.)
235g 210g
8.Plug the remote monitor's VGA cable into the
Weight
Remote Unit's Monitor port
Dimensions (L x W x H) 119 x 86 x 58 mm
9.Plug the second power adapter (supplied with this
package) into an AC source; plug the adapter's
power cable into the Remote Unit's AC 9V Power
Jack
Lim ite d Wa rra nty
VE-120R
IN NO EVENT SHALL THE DIRECT VENDOR'S
LIABILITY FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT,
DISK, OR ITS DOCUMENTATION EXCEED THE
PRICE PAID FOR THE PRODUCT.
10.Power On the computer and monitors
130m
* If Category 5 cable was supplied as part of this
package, it is quite short and primarily intended for
testing purposes. For practical use, you will
probably want to purchase a longer cable.
VE-120L
Remote Monitor
VGA
Te c hnic a l De ta ils
The direct vendor makes no warranty or
representation, expressed, implied, or statutory with
respect to the contents or use of this documentation,
and especially disclaims its quality, performance,
merchantability, or fitness for any particular purpose.
Troubleshooting
Symptom
Action
No Video Make sure that all cables are securely
plugged into their sockets.
Local Monitor
Ca ble Length Ta ble
TP Pin Assignments
Pin Assignment
The direct vendor also reserves the right to revise or
update the device or documentation without
obligation to notify any individual or entity of such
revisions, or update. For further inquiries, please
contact your direct vendor.
Resolution
Distance
1
2
3
4
5
6
7
8
V O UT G
/ V O UT G
V O UT B
V O UT R
/ V O UT R
/ V O UT B
GND
@ 60 Hz @ 75 Hz @ 85 Hz
640 x 480
800 x 600
1024 x 768
1280 x 1024
130
100 m
100 m
100 m
100 m
U SER'S M A N U A L
1600 x 1200 100 m
80 m
GND
Ra dio & TV Interference
TP Wiring Dia gra m
Re a d this guide thoroughly a nd follow the insta lla tion a nd o pe ra tion
proc e dure s c a re fully to pre ve nt a ny da m a ge to the units a nd/or a ny of the
de vic e s the y c onne c t to.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
PAIR 3
PAIR 1
Th e VE-120 pa c k a g e c o n t a in s:
*
*
*
*
*
VE-120L
VE-120R
VGA Cable
Category 5 STP Cable (optional)
Power Adapter
x 1
x 1
x 1
PAIR 2
PAIR 4
x 2
x 1
1
2
G
3
4
5
6
O
7
8
W-G
W-O BL W-BL
W-BR BR
*
User's Manual
JACK POSTIONS
©Copyright 1999 ATEN® Interna tiona l Co., Ltd.
Manual Part NO. PAPE -1141-100
T568B
AT&T 258A
All brand names and trademarks are the registered property of their respective owners.
4
5
|