Pedometer/Heart Rate Watch
USER MANUAL
Watch Activation
1. Before using your watch, remove the LCD
display sticker that is affixed to the watch face.
2. To conserve power, the watch has been set to
Power Off Mode. To activate the watch, simply
press any button (except the Light button).
Metal
Back
Light
Start/Stop
[S]
Sensor
Pedo/Reset
[P]
Mode
[M]
Heart Rate
Sensor Button
Back View
Front View
1
Table of Contents
4
Setting Your Personal Information.......................................
How to Use Your Pedometer...............................................5
Setting Pedometer Sensitivity Level................................. 5-6
How to Measure Your Heart Rate....................................6-7
About Relative Heart Rate................................................7-8
About the Heart Rate Target Zone and Alert....................... 8
Setting the Standard Heart Rate Target Zone......................9
Setting the Heart Rate Target Zone Manually.......................9
Setting the Heart Rate Alert Feature ON/OFF.....................10
Setting Resting Heart Rate.................................................10
Helpful Hints in Measuring Heart Rate................................11
Setting Time and Date........................................................12
Setting Alarm and Hourly Chime Alert............................12-13
How to Use Your Chronograph..........................................13
How to Set Your Countdown Timer....................................13
How to Use Your Countdown Timer...................................14
How to Set Dual Time.........................................................14
Care and Maintenance..................................................14-15
Specifications...............................................................15-16
Battery..........................................................................16-17
Power Off Mode................................................................17
How this Pedometer/Heart Rate Watch Works.............17-18
Patents...............................................................................18
Limited One (1) Year Warranty.....................................18-19
Limitations..........................................................................19
Disclaimer..........................................................................20
Contact Information......................................................21-22
2
Operation Overview
[S]
[M]
[M]
Heart Rate Alert
ON
Heart Rate Alert
OFF
Resting
Heart Rate
Daily Alarm
[M]
Heart Rate Target Zone/
Personal Info Mode
[M]
P
CHR
P
TMR
Countdown
Timer
Chronograph
Dual Time
Mode
Time Mode
[M]
[M]
[M]
[P]
CAL
STEP
Pedometer -
Distance Traveled
Pedometer -
Speed
Pedometer -
Exercise Timer &
Calories Burned
Pedometer -
Step Count
[M]
[M]
[M]
3
[M]
Setting Your Personal Information
In order to use your pedometer properly and ensure
accurate data, you must first set your personal information.
1. In Heart Rate Target Zone/Personal Info mode, hold
Mode for 3 seconds until the display flashes.
2. Press Mode to advance thru settings:
- Target Zone Upper Limit (Hi)
- Target Zone Lower Limit (Lo)
- Age
- Gender (male/female)
- Unit format (Imperial/Metric)
- Weight (lb/kg)
- Height (in/cm)
- Walk Stride Length (in/cm)
3. Edit these settings by using Start/Stop or Reset.
4. To save the new settings, hold Mode for 3
seconds.
( Calculate your average stride length when you walk so
the watch can accurately determine the distance and
speed traveled. To calculate your average stride length,
walk ten steps. Then measure the distance traveled (in or
cm) and divide it by ten. This is your average walking
stride length.
4
How to Use Your Pedometer
1. In Time mode, press Reset to switch to
Pedometer mode.
2. Press Start/Stop to start and stop the pedometer
count.
3. Press Mode to advance thru features:
- Step Count
- Exercise Timer & Calories Burned
- Distance Traveled
- Walking/Running Speed
4. To reset the pedometer count and data, advance
to the Step Count feature. Hold Reset for 3
seconds (the pedometer must be stopped). It will
ask if you wish to “Reset.” Select YES or NO by
pressing Start/Stop or Reset. Selecting NO
resumes Pedometer mode with all previous data.
Selecting YES resets the pedometer count to
zero and all data will be erased.
5. After YES or NO has been selected, press
Mode to continue and return to Pedometer mode.
6. When you are finished in Pedometer mode, press
Reset to switch back to Time mode.
Setting Pedometer Sensitivity Level
To set the sensitivity level (Hi or Lo), the pedometer must
be stopped.
5
1. In Pedometer mode, hold Mode for 3 seconds
until the display flashes.
2. Choose Hi or Lo by using Start/Stop or Reset.
3. To save the new settings, hold Mode for 3
seconds.
How to Measure Your Heart Rate
To get your heart rate reading, follow these three simple
steps:
1. Strap the watch snugly around your wrist.
2. Place your finger on the watch’s sensor (Heart
Rate Sensor Button) and press gently for 3-8
seconds.
3. Once detected, a beep tone sounds and your
heart rate will be displayed in beats per minute
(bpm). It’s that easy!
6
The Pedometer/Heart Rate Watch is a sensitive monitoring
device that reads your heart rate signals and reading times
may vary. If you don’t get a reading in 3-8 seconds, wait a
couple of minutes and try again. This gives the watch a
chance to settle in and pick up your electrical signals.
Your heart rate will be displayed once measured, and will
remain displayed for 6 seconds after you release the
Heart Rate Sensor Button. You can receive a continu-
ous heart rate reading if you continue to hold down the
Heart Rate Sensor Button after your initial reading.
(The watch buttons and heart rate function are not
intended for use in or under water.
About Relative Heart Rate
Relative Heart Rate is your current heart rate divided by
your maximum heart rate, and can be a useful reference to
manage how hard you are working during your exercise.
• Maximum Heart Rate is calculated as: 220 minus your
age (220 – your age).
• Your Relative Heart Rate will be displayed as a
percentage when displaying your heart rate.
7
(Example of Relative Heart Rate:
Tom is 30 years old.
Maximum Heart Rate: 220 – age 30 = 190 bpm.
His current heart rate measured at: 133 bpm.
133/190 = 70% is Tom’s Relative Heart Rate.
About the Heart Rate Target Zone and Alert
The Heart Rate Target Zone feature helps you compare
your acquired heart rate with your targeted heart rate
zone.
• If your heart rate is within the target zone, the
watch will beep once and display your heart rate.
• If your heart rate is lower than your target zone
lower limit, the watch will beep twice and your heart
rate will be displayed with an “L” (L = Low).
• If your heart rate is higher than your target zone
upper limit, the watch will beep twice and your heart
rate will be displayed with an “H” (H = High).
(Example: Debbie’s target zone is 80 bpm - 120 bpm.
After 5 minutes of walking, Debbie measures her heart
rate.
If Debbie’s heart rate is “L 72”, she can decide to pick up
her pace so her next reading falls within her target zone.
8
Setting the Standard Heart Rate Target Zone
By entering your age and gender, the watch will
automatically calculate your standard heart rate range.
1. In Heart Rate Target Zone/Personal Info mode,
hold Mode for 3 seconds until the display
flashes.
2. Press Mode to advance thru settings:
- Age
- Gender (male/female)
3. Edit these settings by using Start/Stop or
Reset.
4. To save the new settings, hole Mode for 3
seconds.
Setting the Heart Rate Target Zone Manually
You can manually override the standard heart rate settings
to those of your own preference.
1. In Heart Rate Target Zone/Personal Info mode,
hold Mode for 3 seconds until the display
flashes.
2. Press Mode to advance thru settings:
- Target Zone Upper Limit (Hi)
- Target Zone Lower Limit (Lo)
3. Edit these settings by using Start/Stop or
Reset.
4. To save the new settings, hold Mode for 3
seconds.
9
Setting the Heart Rate Alert Feature ON/OFF
While in Heart Rate Target Zone/Personal Info mode, press
Start/Stop to toggle the Heart Rate Alert function ON or
OFF.
(When OFF, your upper and lower limits will be
‘hidden’ and your Heart Rate Alert function will be
disabled.
(When ON, your upper and lower limits will appear
in the display and your Heart Rate Alert function will
be enabled.
Setting Resting Heart Rate
The Resting Heart Rate feature can be used as a
reference to inform you of your progress. The lower your
resting heart rate becomes, the healthier you become.
1. In Resting Heart Rate mode, hold the Heart Rate
Sensor Button for 3-8 seconds until your heart
rate is acquired.
2. A beep tone sounds and your resting heart rate
will be displayed and recorded.
( It is recommended to obtain your resting heart rate
when waking up from sleep. This will ensure the most
accurate reading for a resting heart rate.
10
Helpful Hints in Measuring Heart Rate
If you are having difficulty measuring your heart rate, you
may want to try the following steps. Try each of these in
succession until you are able to measure your heart rate:
1. Make sure the watch is snugly strapped to your wrist.
A loose fit makes it more difficult to properly measure
your heart rate. Stop if OK or
†
2. When pressing on the sensor, make sure you are using
the soft, flat pad of your finger, not the tip of your
finger. OK or
†
3. Press gently with enough pressure to activate the
heart rate measure mode. Muscle ‘noise’ from
pressing too hard can make it difficult to measure your
heart rate. OK or †
4. Make sure the metal back of the watch is laying flat on
your skin. OK or †
5. Make sure your wrist and fingers are clean and free
from dirt, oils, or lotions. OK or †
6
Stay still, and relax your arms on a stable surface while
taking your heart rate. OK or †
7. Clean the front sensor and back metal plate with a mild
soap and water or similar cleaning solution. OK or
8. Moisten, with water, the pad of the finger you are using
to contact the sensor on the face of the watch. OK
or †
†
9. Moisten, with water, the surface between the back
metal plate of the watch and the skin on your wrist.
11
Setting Time and Date
1. In Time mode, hold Mode for 3 seconds until the
display flashes.
2. Press Mode to advance thru settings:
- Seconds
- Minutes
- Hours
- Year
- Month
- Day
- Month/Day format
- 12/24 hr format
- Key Beep
3. Edit these settings by using Start/Stop or
Reset.
4. To save the new settings, hold Mode for 3
seconds.
Setting Alarm and Hourly Chime Alert
1. In Alarm mode, hold Mode for 3 seconds until the
display flashes.
2. Press Mode to advance thru settings:
- Minutes
- Hours
3. Edit these settings by using Start/Stop or
Reset.
12
4. To save the new settings, hold Mode for 3
seconds.
( In Alarm mode, press Start/Stop to toggle the Alarm
alert ON/OFF; press Reset to toggle the Hourly
Chime alert ON/OFF.
How to Use Your Chronograph
1. In Chronograph mode, press Start/Stop to begin
timing.
2. Press Start/Stop again to stop timing.
3. To reset the chronograph, press Reset (the
chronograph must be stopped).
How to Set Your Countdown Timer
1. In Countdown Timer mode, hold Mode for 3
seconds until the display flashes.
2. Press Mode to advance thru settings:
- Seconds
- Minutes
- Hours
3. Edit these settings by using Start/Stop or
Reset.
4. To save the new settings, hold Mode for 3
seconds.
13
How to Use Your Countdown Timer
1. In Countdown Timer mode, press Start/Stop to
begin the timer.
2. Press Start/Stop again to stop the timer.
3. To reset the countdown timer, press Reset (the
timer must be stopped).
How to Set Dual Time
Dual Time is the watch’s secondary form of time.
1. In Dual Time mode, hold Mode for 3 seconds until
the display flashes.
2. Press Mode to advance thru settings:
- Hours
- Minutes
3. Edit these settings by using Start/Stop or
Reset.
4. To save the new settings, hold Mode for 3
seconds.
Care and Maintenance
To ensure proper function of your Pedometer/Heart Rate
Watch:
14
• Avoid rough usage or severe impacts to the watch
• Keep the front sensor and back metal plate free from
dirt, oils, or other contaminants.
• Periodically clean the watch with a soft cloth, mild
soap and water, or similar cleaning solution.
• Keep the watch out of extreme heat or cold.
• Do not expose the watch to intense direct sunlight for
long periods of time.
• Do not expose the watch to chemicals such as
gasoline, alcohol, or solvents.
Specifications
Pedometer
Displayable Step Range: 0-999999 steps
Exercise time: 99 hours, 59 minutes, 59 seconds
Maximum Distance: 0-400 km/ 0-248.55 miles
Maximum Speed: 36 km/hour/ 22 mph
Calorie Range: 0-99999 calories
Pedometer Sensitivity: 2 levels
Heart Rate
Heart Rate Range: 43-200 BPM
Upper and lower limit heart rate zones/alerts
Percentage of maximum heart rate
Time
AM, PM, hour, minute, second
12/24 hour format
Calendar: month, date, day display with auto leap year
adjustment
Dual time
15
Alarm
One (1) alarm time
Hourly chime
Alarm duration: 30 seconds
Chronograph
Resolution: 1/100 second
Measuring range: 99 hours, 59 minutes, 59 seconds
Countdown Timer
Resolution: 1 second
Measuring Range: 99 hours, 59 minutes, 59 seconds
Other
Electroluminescent (EL) backlight
Water resistant up to 50 meters
Key beep ON/OFF
( The watch buttons and heart rate function are not
intended for use in or under water.
Battery
Battery replacement will be required from time to time, and
should occur when:
• The display fades in part or completely
• The Heart Rate function will not activate
The battery life will vary depending on usage of the light,
heart rate and pedometer features (which require high
power consumption).
16
To replace the battery of your Pedometer/Heart Rate
Watch, we recommend this be done by a watch repair
service center. This will ensure the water resistance will
be retained after battery replacement.
The watch uses one (1) standard lithium replacement
battery: CR2032
Power Off Mode
To conserve the battery’s lifetime during long periods of
inactivity, hold the “Mode”, “Start/Stop” and “Reset”
buttons for 3 seconds. The watch will turn off and enter
Power Off Mode. To activate the watch again, simply press
any button (except the Light button).
( CAUTION: Entering Power Off Mode will reset the
watch and all of its data.
How this Pedometer/Heart Rate Watch Works
The S-Pulse™ technology measures the electronic signals
that pass through your body as a result from the beating of
your heart. This measurement is obtained by the watch’s
two sensors. The back metal plate of the watch is actually
the primary sensor that measures these electronic signals
off your arm.
17
The heart rate measurement is done when you place your
finger from one hand on the sensor button on the watch
attached to your opposite arm. This creates a loop across
your body the watch can now read.
The digital pedometer is powered by a motion-sensing
accelerometer, considered the most accurate and reliable
way to track your steps.
Patents
The Pedometer/Heart Rate Watch and S-Pulse™
technology are a result of, and protected by, the following
Salutron, Inc. patents:
US: 5,738,104 & 5,876,350
Europe: EPO 0861045B1
Limited One (1) Year Warranty
Your Pedometer/Heart Rate Watch is warranted for a
period of one (1) year from the date of purchase from an
authorized retailer.
If defective, return the watch with the original receipt, or
copy, to your original retailer or to Life Fitness for a
replacement watch.
18
This warranty covers defects in materials and
workmanship only. It does not cover the battery, damage
due to abuse or misuse, accidents, or any commercial use.
Limitations
The warranty stated above is the only warranty applicable
to this product. All other warranties, expressed or implied,
including all implied warranties of merchantability or fitness
for a particular purpose, are hereby disclaimed. No verbal
or written information given by Life Fitness, its agents or
employees shall create a guarantee or in any way
increase the scope of this warranty.
Repair or replacement as provided under this warranty is
the exclusive remedy of the consumer. Life Fitness shall
not be liable for incidental or consequential damages
resulting form the use of this product or arising out of any
breach of any express or implied warranty on this product.
Except to the extent prohibited by law, any implied
warranty of merchantability or fitness for a particular
purpose on this product is limited to the applicable
warranty period set forth above. Consumer rights may
vary from state to state.
19
Disclaimer
The Pedometer/Heart Rate Watch is not a medical device,
nor intended for use in medical or patient monitoring
applications. It is not intended for use in any commercial
application.
Always consult a physician before starting any physical
activity.
The features/images of your watch may vary slightly from
those described in this Instruction Manual. The information
in this manual is intended to be for information purposes
only, and is subject to change without notice.
S-Pulse is trademark of Salutron, Inc.
20
Contact Information
For Product Service in the US:
Life Fitness US
Telephone (+1) 847.451.0036
Fax: (+1) 847.288.3702
Toll-Free Telephone: 800.351.3737
For Product Service Internationally:
Life Fitness Europe GmbH
Telephone: (+49) 089.317.751.66
Fax: (+49) 089.317.751.38
Life Fitness (UK) LTD
Telephone: (+44) 1353.665507
Fax: (+44) 1353.666018
Life Fitness Atlantic BV
Life Fitness Benelux
Telephone: +31 (0) 180.64.66.66
Fax: +31 (0) 180.64.66.99
Life Fitness Italia S.R.L.
Telephone: (+39) 0472.835.470
Fax: (+39) 0472.833.150
Toll-Free Telephone: 800.438836
21
Contact Information
For Product Service Internationally:
Life Fitness Vertriebs GmbH
Telephone: (+43) 1615.7198
Fax: (+43) 1615.7198.20
Life Fitness Asia Pacific Ltd
Telephone: (+852) 2891.6677
Fax: (+852) 2575.6001
Life Fitness Latin America and Caribbean
Telephone: (+1) 847.288.3964
Fax: (+1) 847.288.3886
Life Fitness Brazil
Telephone: (+55) 11.7295.2217
Fax: (+55) 11.7295.2218
Life Fitness Japan
Telephone: (+81) 3.3359.4306
Fax: (+81) 3.3359.4307
Life Fitness Iberia
Telephone: (+34) 93.672.4660
Fax: (+34) 93.672.4670
22
Copyright © 2009 Life Fitness. All rights reserved.
Duplication or copying of all or part of this manual without
the express written consent of Life Fitness is prohibited.
|