HEARTH PRODUCTS
KITS AND ACCESSORIES
POLISHED BRUSHED
STAINLESS HOOD TRIM KITS
750,219M
04/2006
INSTALLATION INSTRUCTIONS FOR BRUSHED STAINLESS HOOD TRIM KITS
(MODELS: ODGHK36 & ODGHK42) FOR USE WITH 36 & 42 OUTDOOR GAS FIREPLACES
GENERAL INFORMATION
These brushed stainless hood trim kits (36" hood kit - Catalog no. H4818 and 42" hood kit - Catalog no. H4819) may be used with outdoor gas
fireplaces. These kits contain one brushed stainless hood, two (2) screws and these instructions.
INSTALLATION INSTRUCTIONS
To install the hood trim kit, refer to Figure 1 and follow the steps outlined below:
Step 1. Turn off the fireplace and allow it to cool before proceeding.
Step 2. Place the hood lip under the face top opening, as shown in Figure 1 - Step 1. Attach the hood with two (2) screws, one each side, as
shown in Figure 1 - Step 2. Completed installation is shown in Figure 1 - Step 3.
Face Top
Place The Hood
Lip Up And
Under The Face
Top Opening
Attaching Screw
(Seen From Below)
Hood Lip
Step-1
Step-2
Step-3
Figure 1
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.
LHP
Printed in U.S.A. © 2006 by LHP
1110 West Taft Avenue
P/N 750,219M REV. N/C 04/2006
Orange, CA 92865
|