Specifications & Capacities
Rear Blades
RBT35 Series
RBT3584
84”
RBT3596
96”
Blade Width
Approximate Weight (lbs.)
with manual links
709#
745#
Maximum Engine Horsepower
Maximum G.V.W. (lbs.)
Hitch Type
80 HP for 2 Wheel Drive and 65 HP for 4 Wheel Drive
9500
Cat. 1 & 2
Fits Land Pride Quick-Hitch
Blade Angle
Manual:
hydraulic:
9 positions in 10 degree increments (1 center, 4 clockwise & 4 counterclockwise).
Up to 50 degrees in either direction.
Angle Cylinder
Blade Tilt
3 1/2” X 14” X 1 1/4”
Up to 20 degrees
Tilt Cylinder
2” X 6” X 1 1/4”
Blade Offset
Up to 30 inches left and right
3 1/2” X 14” X 1 1/4”
Offset Cylinder
Moldboard Height
17” tall
Moldboard Thickness
Moldboard King Pin
Cutting Edge
5/16” reinforced, 3/16” tapered reinforcement channel
3" diameter
1/2” x 6” Heat reversible blade
Fully Welded Tubular Construction
Retractable
Main Frame Construction
Parking Stand
Accessories
Skid Shoes
End Plates
Gauge Wheel
Cushion Valve
26808
Top View
Side View
Designs, specifications, features and information are subject to change without notice.
67
2/16/09
301-251S
|