FireBrigadeKeyBox
• Frames for flush mounting or for
installation into stainless steel
columns
• Various inner doors and accessories
for different locks
• Protective cover for installation on
outside facades
• Power supply for heating of the
outer door
Flush Mounting Frame EZ700-2
The Flush Mounting Frame EZ700-2 is used for
the easy flush mounting of the Fire Brigade Key
Boxes FSK700-2 and FSK700-2SX.
When the building is structurally complete, the
flush mounting frame is embedded in a wall and
then the facade is completed.
Afterwards, the fire brigade key box can be
inserted into the flush mounting frame and it can
be screwed on firmly by means of the two bolts.
Later on, disassembly is possible in the same
way.
Specifications
Dimensions W × H × D
Weight
275 × 245 × 160 (mm)
3.3kg
Order number
Order name
265751
Flush Mounting Frame EZ700-2
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
FSK-ZBH_DBL_LST_EN_0820.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Inner doors and accessories
Depending on which lock has been determined
by the responsible fire brigade, different inner
doors are available, which allow to accommodate
the respective locks.
The Inner Doors ITA-2 and ITA-3 are equipped
with a lock for the use of a 7-pin profile half
cylinder.
The Inner Door ITB-2 can accommodate the
double-bit locks type 2 and type 2005.
The Inner Door ITF-2 can hold the double-bit lock
type 70091/92.
The Auxiliary Cylinder PHZ700-2 can be installed
into the fire brigade key box instead of the profile
half cylinder for the building key. In this case, one
or more building keys are attached by means of
a chain link.
By means of the Mounting Bracket for Profile Half Cylin- can be easily upgraded from a two-key model to a
der PHZAW700-2, a Fire Brigade Key Box FSK700-2SX version for three or four building keys.
Specifications
Inner door for profile half cylinder 30.5mm
Dimensions W × H × D
Weight
108 × 150 × 5 (mm)
500g
Order number
Order name
265752
Inner Door for Profile Half Cylinder 30.5mm ITA-2
Inner door for profile half cylinder 35.5mm
Dimensions W × H × D
Weight
108 × 150 × 5 (mm)
500g
Order number
Order name
265748
Inner Door for Profile Half Cylinder 35.5mm ITA-3
Inner door for double-bit lock type 2/2005
Dimensions W × H × D
Weight
108 × 150 × 5 (mm)
400g
Order number
Order name
265753
Inner Door for Double-bit Lock Type 2/2005 ITB-2
Inner door for double-bit lock type 70091/92
Dimensions W × H × D
Weight
108 × 150 × 5 (mm)
400g
Order number
Order name
265757
Inner Door for Double-bit Lock Type 70091/92 ITF-2
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
FSK-ZBH_DBL_LST_EN_0820.PDF • PAGE 3
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Auxiliary cylinder
Order number
265744
Order name
Auxiliary Cylinder for FSK700-2/2SX PHZ700-2
Mounting bracket for profile half cylinder
Order number
Order name
265743
Mounting Bracket for Profile Half Cylinder PHZAW700-2
Power supply for heating NT700-1
The standard equipment of the Fire Brigade Key
Boxes FSK700-2 and FSK700-2SX includes a
heating device, which consists of several SMD
heating resistors that are placed on the drilling
protection board. The heating device prevents
the outer door from freezing in extreme weather
conditions, and at the same time it keeps the
interior of the safe dry.
The heating device of the fire brigade key box
can be easily powered by the Power Supply
NT700-1.
A built-in miniature circuit breaker protects the
line side of the device.
The power supply is accommodated in a surface-
mount housing which is also suitable for moun-
ting on a DIN rail.
Specifications
Operating voltage
Output voltage
Protection class
Ambient temperature
Dimensions W × H × D
Colour
230VAC +10/-15%, 50Hz
24VAC
IP30
0°C to +70°C
110 × 180 × 80 (mm)
grey white
Weight
900g
Order number
Order name
237700
Power Supply for FSK Heating NT700-1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
FSK-ZBH_DBL_LST_EN_0820.PDF • PAGE 4
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|