EDS500-1, ÜMB500-1
• ADM loop technology with
System Sensor/200 protocol
• Confirmation of the valve position or
integration of contact detectors into
the ADM loop
• Status LED
fig. A
• Setting of address by means of
push button
fig. B
• Small design
Position Switch EDS500-1
The Position Switch EDS500-1 (fig. A) is an addressable plastic case. Due to the use of optoelectronic compon-
module and serves for the confirmation of the position ents the module is especially durable and fail-safe. The
of mechanical devices, such as slides or valves, via the mounting terminals are designed according to DIN 912
bidirectional communication on the ADM loop with Sys- M5. The module address is entered using a push button
tem Sensor/200 protocol. The module is fitted into a and can be verified by means of an LED.
Specifications
Operating voltage
Current consumption
Ambient temperature
Dimensions L × W × H
Colour
Supply through loop voltage
approx. 300µA (quiescent)
-20°C to +60°C
59 × 32 × 63 (mm)
red/black
Protection class
Weight
IP65
80g
Order number
Order name
249090
Position Switch/Anal./500/SS EDS500-1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
EDS-UMB500-1_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|