• Remote setup and maintenance
of Fire Detection Control Panels
Series BC216 and BC016
• Module setup via configuration
software ConfigENM2
• Power supply through fire detection
control panel possible
• Serial data cable included
Description
The Ethernet Module ENM2-1 is connected to the Serial like any other device, e.g., PC or network printer.
Interface Module SIM216-1 of a Fire Detection Control The Ethernet Module ENM2-1 is set via the configu-
Panel Series BC216 or BC016 and converts the com- ration software ConfigENM2, which can be found on
munication between the control panel and a PC into the the CD-ROM containing the parameterisation software
IP protocol. That allows the parameterisation software PARSOFT.
PARSOFT to establish an easy remote access to the
Fire Detection Control Panels Series BC216 and BC016 The remote PARSOFT PC contacts the ethernet module
for the purpose of setup and maintenance.
via the set IP address. The operation of PARSOFT is the
The system administrator of the customer LAN integra- same for local access and for remote access.
tes the Ethernet Module ENM2-1 into the customer LAN
Specifications
Operating voltage
Current consumption at 24V
Ambient temperature
Relative humidity
Dimensions W × H × D
Weight
21 – 30VDC
45mA
+5°C to +50°C
max. 95% (no condensation)
100 × 90 × 25 (mm)
150g
Order number
223025
Order name
Ethernet Module ENM2-1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
ENM2-1_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|