Operating Instructions
LVC-C300HM/HP/NM/NP LVC-C310HM/HP/NM/NP
LVC-C301HM/HP/NM/NP LVC-C311HM/HP/NM/NP
LVC-C302HM/HP/NM/NP LVC-C312HM/HP/NM/NP
LVC-C303HM/HP/NM/NP LVC-C313HM/HP/NM/NP
Before installing and using the camera,
please read these instructions throughly
and retain them for later reference.
Contents
Features............................................................................................................................................................................3
Cautions for Safe Operation ............................................................................................................................................4
Operating Controls and Their Functions.......................................................................................................................5
Power IN/CONTROL.........................................................................................................................................................6
External Key(A/D IN)........................................................................................................................................................7
MENU DESCRIPTIONS ....................................................................................................................................................8
CAMERA ID ..................................................................................................................................................................9
FOCUS MODE SET...............................................................................................................................................10-11
AWB SET...............................................................................................................................................................12-13
AE SET ..................................................................................................................................................................14-16
SPECIAL SET........................................................................................................................................................17-18
MOTION DET..............................................................................................................................................................19
F. OSD SET ................................................................................................................................................................20
E. SENSITIVITY..........................................................................................................................................................21
WDR SET....................................................................................................................................................................22
On-Screen Display....................................................................................................................................................23-24
Specifications ...........................................................................................................................................................25-26
FEATURES
The power zoom color video camera is designed for use in monitoring system.
•
•
•
•
•
•
•
•
High resolution and high sensitivity with a 1/4 inch CCD (Charge Coupled Device)
High magnitude of zoom lens with optical X 27, Digital X 270(MAX)
Auto Focus
Auto White balance
Auto exposure with DC Iris control
Day & Night function : LVC-C310
DSS(Digital Slow Shutter) is available : Optional
WDR(Wide Dynamic Range) is available : Optional
3
Cautions for Safe Operation
Power Supply
This camera must always be operated a 12V DC
UL Listed, Class 2 Power Supply only.
• Close to generators of powerful electromagnetic
radiation such as radio or TV transmitters.
Care of the unit
Handling of the unit
• Remove dust or dirt on the surface of the lens
with a blower.
• Use a dry soft cloth to clean the body. If it is very
dirty, use a cloth dampened with a small quantity
of neutral detergent, then wipe dry.
• Avoid the use of volatile solvents such as
thinners, alcohol, benzene, and insecticides.
They may damage the surface finish and/or
impair the operation of the camera.
Be careful not to spill water or other liquids on the
unit, or to get combustible or metallic material
inside the body. If used with foreign matter inside,
the camera is liable to fail, or to be a cause of fire
or electric shock.
Operating and storage location
Avoid viewing a very bright object (such as light fit-
tings) for an extended period. Avoid operating or
storing the unit in the following locations.
• Extremely hot or cold places (operating tempera-
°
°
ture 0 C-45 C)
• Damp or dust place
• Where it is exposed to rain
• Where it is subject to strong vibration
4
Operating Controls and Their Functions
1. Tripod adaptor
1
This adaptor can also be attached on the bottom of the camera.
2
2. Lens mount cap
3. TELE Key
When push the TELE KEY, picture is telephoto
4. WIDE Key
When push the WIDE KEY, picture is wide angle
5. Focus Near Key
In a manual situation, focus get near.
6. Focus Far Key
In a manual situation, focus get far.
7. Menu Key
If you want to set up a diverse function, you can push this button.
8. Video output (S-Video type)
Connect to the S-Video in connector of a monitor.
9. Interface of camera control JACK (6 Pin Din Jack Type)
• Connect to an external voltage controller
• You can supply a camera with power from this. (DC12V)
10. Video output(BNC type)
Connect to the video in connector of a monitor.
5
Power In / Control
You can adjust focus and zoom by a pin terminal on the back side
of the camera.
1
6
5
2
3
4
is the color of the cable.(If it is offered)
Adjust voltage from 1 pin and 2 pin
*
6
External Key (A/D IN)
Schematic diagram of wired
remote-control
1) C300'S
2) C310'S
6.8K
8.2K
12K
18K
33K
68K
180K
7
MENU DESCRIPTIONS
page 9
page 10
page 12
page 14
page 17
page 19
page 20
page 21
page 22
Using TELE, WIDE, FOCUS+, FOCUS- button
• TELE and WIDE are used for UP and DOWN.
• FOCUS+ and FOCUS- are used for INCREASE and DECREASE the data.
8
CAMERA ID
1. CAMERA ID
To connect a large number of camera , It can be
assigned to identification number to each camera for
camera control easily.
(OFF, 0 - 255 : total numbers of ID are 256)
• It only can be set this function using ID commend.
To transfer ID Code of camera , In first byte at PC control.
Set the ID number of camera , and then the ID number
display continuously.
9
FOCUS MODE SET
2. Focus Set:
2-1. Focus Mode Set :
This function is for focus mode setting
A) Set up “FOCUS SET” in main menu using Menu key.
Select the “FOCUS MODE” in submenu using Tele/Wide
key. And then set the mode (Auto, Push auto, or Manual)
using Focus key.
PUSH
2-2. Focus Distance Set :
This function is for selection of minimum shooting
distance.
A) Select the “FOCUS DIST” in submenu using Tele/wide key.
B) Set the focus distance mode from 1cm to 5M. (1cm, 10cm,
50cm, 1M, 3M, 5M) using Focus key.
2-3. ZOOM START Set :
This function is for selection of zoom start position.
A) Select the “ZOOM START” in submenu using Tele/wide key.
B) Set the Zoom start mode from x1 to x27. using Focus key.
10
FOCUS MODE SET
2-4. ZOOM END Set :
This function is for selection of zoom end position.
A) Select the “ZOOM END” in submenu using Tele/wide key.
B) Set the Zoom end mode from (Zoom Start + 1) x 270 to X using
Focus key.
PUSH
2-5. ZOOM SPEED Set :
This function is for selection of zoom speed.
A) Select the “ZOOM SPEED” in submenu using Tele/wide key.
B) Set the Zoom speed, Slow, Middle , Quick using Focus key.
2-6. ZOOM TRACKING MODE Set :
This function is for selection of zoom tracking mode.
A) Select the “ZTRK” in submenu using Tele/wide Command,
B) Set the Zoom tracking mode to Auto or Manual.
* Zoom tracking means focused zooming state.
2-7. INITIAL SET :
If initial mode set to ON, All FOCUS SET function is
changed to the factory setting.
A) Select the “INITIAL SET” in submenu using Tele/wide key.
B) Set the initial set mode to ON or OFF using Focus key.
2-8. RETURN TO MAIN MENU :
This function is exit to main menu.
A) Select the “RETURN” in submenu using Tele/wide key.
B) Set the return mode using Focus key.
11
AWB SET
3. AWB SET
3-1. WB Mode Set :
This function is for changing the WB mode.
A) Set up “AWB SET” in main menu using Tele/wide key.
B) Select the “WB MODE” in submenu using Tele/wide key.
C) Set the mode Auto, Push auto , Manual, Outdoor, Indoor,
Special using Focus key.
*WBC MODE ; Use for changing White Balance Mode .
1) AUTO ; WB Range 2800 °K ~ 8000 °K .
2) PUSH AUTO ; Set the AWB mode to Push Auto, then WB
Mode is auto.
3) SPECIAL ; Under the special WB condition( Differ from curve of the
control color temperature ) , Adjust Red and Blue to perform a
desired Auto White Balance.
3-2. RED ADJUST Set :
This function is available for Special ,Push Auto,
Manual WB mode.
This mode is the adjustment of user option for special color.
A) Select the “RED ADJUST” in submenu using Tele/wide key.
B) Adjust the level from (-30 to 30 SPECIAL,
-128 to +127 PUSH AUTO, 0-255 MANUAL) using Focus key.
12
AWB SET
3-3. BLUE ADJUST Set :
This function is available for Special ,Push Auto,
Manual WB mode.
This mode is the adjustment of user option for special
color.
A) Select the “BLUE ADJUST” in submenu using Tele/wide key.
B) Adjust the level from (-30 to 30 SPECIAL,
-128 to +127 PUSH AUTO, 0-255 MANUAL) using Focus key.
3-4. PUSH AUTO :
In case of PUSH AUTO WB mode.
Adjust the push auto mode ON, WB act automatically.
3-5. INITIAL SET :
If initial mode set to ON, All AWB function is changed
to the factory setting
A) Select the “INITIAL SET” in submenu using Tele/wide key.
B) Set the initial set mode to ON or OFF using Focus key.
3-6. RETURN TO MAIN MENU :
This function is exit to main menu.
A) Select the “RETURN “ in submenu. Using Tele/wide key.
B) Set the return mode using Focus key.
13
AE SET
4. AE SET
4-1. AE Mode Set :
This function is for changing to AE mode.
A) Set up “AE SET” in main menu using Tele/wide key.
B) Select the “AE MODE” in submenu using Tele/wide key.
C) Set the mode auto, IRIS MAN, AGC MAN, Manual, Auto using
Focus key.
4-2. IRIS ADJUST Set :
This function is available for IRIS MAN mode.
A) Select the “IRIS ADJUST” in submenu using Tele/wide key.
B) Adjust the level from ##MIN to ##MAX(MANUAL, IRIS MAN) using
Focus key.
* ## : Current level at Auto mode.
4-3. AGC ADJUST Set :
This function is available for AGC MAN mode.
A) Select the “IRIS ADJUST” in submenu using Tele/wide key.
B) Adjust the level from ##MIN to ##MAX(MANUAL, AGC MAN) using
Focus key.
* ## : Current level at Auto mode.
14
AE SET
4-4. BRIGHTNESS ADJUSTMENT Set :
A) Select the “BRIGHTNESS” in submenu using Tele/wide key.
B) Adjust the level from ##MIN to ##MAX. using Focus key.
* ## : Current level at Auto mode.
4-5. BACKLIGHT Set :
A) Select the “BACKLIGHT” in submenu using Tele/wide key.
B) Set the mode OFF, ON, or AUTO using Focus key.
* Auto BLC (Auto back light compensation)
When a back light condition occurs in area1,area2, area3, or area4.
the back light compensation is enable. When the back light
condition disappears in that area,
BLC is disable automatically. If do not want this mode, set to OFF
4-6. FLICKERLESS Set :
A) Select the “FLICKERLESS” in submenu using Tele/wide key.
Area1
B) Set the mode OFF, ON using Focus key.
Area3
Area2 Area0
Area4
* FLICKERLESS ; Use for removing the flicker of picture
ON : Remove the flicker ( In case of PAL System ; Shutter Speed
1/120 sec ).
Auto BLC
15
AE SET
4-7. SHUTTER SPEED Set :
A) Select the “SHUTTER” in submenu using Tele/wide key.
B) Set the mode NORMAL, 1/125 - 1/10000 using Focus key.
4-8. INITIAL SET :
A) Select the “INITIAL SET” in submenu using Tele/wide
Command,
B) Set the initial set mode to ON or OFF using Focus key.
4-9. RETURN TO MAIN MENU :
This function is exit to main menu.
A) Select the “RETURN “ in submenu using Tele/wide key.
B) Set the return mode using Focus key.
16
SPECIAL SET
5. SPECIAL SET
5-1. User Title Set :
This function is for custom title on screen display.
A) Set “SPECIAL SET” in main menu using Tele/wide key.
B) Select the “USER TITLE” in submenu using Tele/wide key.
C) Set the position of title and set data using Tele / Wide,
Focus key.
5-2. SHARPNESS ADJUST Set :
A) Select the “SHARPNESS” in submenu using Tele/wide key.
B) Adjust the level from 0 to 15 using Focus key.
5-3. MIRROR Set :
A) Select the “MIRROR” in submenu using Tele/wide key.
B) Select the mode ON, OFF using Focus key.
5-4. COLOR Set :
This mode is for B/W mode.
A) Select the “COLOR” in submenu using Tele/wide key.
B) Select the mode ON, OFF using Focus key.
17
SPECIAL SET
5-5. NEGATIVE Set :
This mode is to change color and luminance to negative.
A) Select the “COLOR” in submenu using Tele/wide key.
B) Select the mode ON, OFF using Focus key.
5-6. WIDE BURST Set :
This mode is to change color burst width for long dis-
tance application.
A) Select the “WIDEBURST” in submenu using Tele/wide key.
B) Select the mode ON, OFF using Focus key.
5-7. INITIAL SET :
If initial mode set to ON, All SPECIAL functions are changed to the factory setting
A) Select the “INITIAL SET” in submenu using Tele/wide key.
B) Set the initial set mode to ON or OFF Using Focus key.
5-8. RETURN TO MAIN MENU :
This function is exit to main menu.
A) Select the “RETURN” in submenu using Tele/wide key.
B) Set the return mode Using Focus key.
18
MOTION DET
6. MOTION DETECTION SET
6-1. DETECTION Mode Set :
A) Set “MOTION” in main menu using Tele/wide key.
B) Select the “DETECTION” in submenu. Using Tele/wide key.
C) Set the mode ON, OFF using Focus key.
6-2. LEVEL ADJUST Set :
This function is available for DETECTION ON mode.
A) Select the “LEVEL SET” in submenu. Using Tele/wide key.
B) Adjust the level to some sensitivity using Focus key.
6-3. INITIAL SET :
If initial mode set to ON, All MOTION functions are
changed to the factory setting
A) Select the “INITIAL SET” in submenu using Tele/wide key.
B) Set the initial set mode to ON or OFF Using Focus key.
6-4. RETURN TO MAIN MENU :
This function is exit to main menu.
A) Select the “RETURN” in submenu using Tele/wide key.
B) Set the return mode Using Focus key.
19
F. OSD SET
7. F. OSD SET
7-1. FUNCTION Set :
A) Set “F. OSD” in main menu using Tele/wide key.
B) Select the mode what you want in submenu using Tele/wide key.
C) Set the display mode of OSD using Tele / Wide, Near/Far key.
*INITIAL SET and RETURN are the same as before procedure.
20
E. SENSITIVITY SET
8. E. SENSITIVITY SET: (OPTION)
8-1. E. SENSITIVITY SET
A) Select the “E.SENSITIVITY” in submenu using Tele/wide key.
B) Select the sensitivity mode what you want in submenu using
Focus key.
* Mode sequence : OFF-X2 AUTO-X4 AUTO-X8 AUTO-
X10AUTO-X16 AUTO- X32 AUTO
-OFF- X2 FIX-X4 FIX -X8 FIX -X10 FIX -X16 FIX - X32 FIX-OFF
8-2. INITIAL SET :
If initial mode set to ON, E.SENSITITY functions are
changed to the factory setting
A) Select the “INITIAL SET” in submenu using Tele/wide key.
B) Set the initial set mode to ON or OFF Using Focus key.
8-3. RETURN TO MAIN MENU :
This function is exit to main menu.
A) Select the “RETURN” in submenu using Tele/wide key.
B) Set the return mode Using Focus key.
21
WDR SET
9. WDR SET (OPTION)
9-1. WDR SET
A) Select the “WDR” in main menu using Tele/wide key.
B) Select the “WDR CONTROL” in submenu using Tele/wide key.
C) Select the WDR mode what you want in submenu using Focus key.
* Mode sequence : OFF -- ON -- AUTO
WDR
* WDR Auto mode is working at the condition of high light
back light.
9-2. LEVEL ADJUST Set :
This function is the gain adjustment of WDR
A) Select the “SENSITIVITY” in submenu using Tele/wide key.
B) Adjust the level to some sensitivity using Focus key.
9-3. INITIAL SET :
If initial mode set to ON, All WDR functions are
changed to the factory setting
A) Select the “INITIAL SET” in submenu using Tele/wide key.
B) Set the initial set mode to ON or OFF Using Focus key.
9-4. RETURN TO MAIN MENU :
This function is exit to main menu.
A) Select the “RETURN” in submenu using Tele/wide key.
B) Set the return mode Using Focus key.
22
On Screen Display
FUNCTION
OSD Format
Description
Some of these functions will
be displayed every time the
camera is operated and
then disappeared after 5
seconds.
1. Focus Mode
Non display
Auto Mode
Manual / push Auto Mode
Back Light OFF
2. Back Light
Non display
“BL”display
Non display
“Ff”display
1/125
BLC ON / Auto BLC Mode
Normal Shutter ( PAL: 1/50)
Flickerless Mode
3. Shutter Speed
1
2
3
6
1/10,000
4. STAND-BY
5. CAMERA ID
Indicate the camera stand-by during the
camera’s power turning ON.
STAND-BY
According to write the identification number to
each camera, Multi-point control is available
(PC Control 000~255).
5
7
4
23
On Screen Display
FUNCTION
OSD Format
Description
6. WBC Mode
White Balance AUTO
Special Auto White Balance; Adjustment Mode according to
change of external illuminant. RED ADJUST and BLUE
ADJUST (0~255) are available. After changing R/B value, The
mainternance mode is “AUTO”.
S
W
WB Preset for INDOOR (3200°K)
Wb Preset for OUTDOOR (5100°K)
M
W
Manual WB Adjustment; In manual mode the HUE control is
available (0 ~ 99).
Push Auto White Balance; Turn this mode ON, the white trace
automatically. Turn this mode OFF, preserve the white of final
auto tracing action (Manual).
P
W
7. ZOOM Display
DX 270
X 27
Digital Zoom mode
Optical Zoom mode
24
Specifications
Image device
1/4" interline transfer CCD
NTST, High resolution : 811(H) X 508(V) 410K
NTST, Normal resolution : 537(H) X 505(V) 270K
PAL, High resolution : 795 (H) X 596 (V) 470K
PAL, Normal resolution : 537(H) X 597(V) 320K
Sync system
Internal sync
Approx.480 Line (NTSC, High resolution)
Horizontal resolution
320 Line (NTSC, Normal resolution)
470 Line (PAL, High resolution)
320 Line (PAL, Normal resolution)
(at center of screen)
Lens
X 27 Zoom (F 1.5 (W), F 3.8 (T) f= 3.25 ~ 88.0 mm), Video AF
X 10 (Total Zoom Ratio X 270)
Digital Zoom Ratio
Minimum illumination
Normal Mode : 1 Lux (30 IRE)
Electronic Shutter Speed Mode :
0.01 Lux (X32 Field Accumulate)
Night Mode : 0 Lux (Infrared ON)
S/N
More than 48dB
2:1 Interlace
Scanning System
Scanning Frequency(H)
Scanning Frequency(V)
15.734 kHz (NTSC), 15.625 kHz (PAL)
60Hz (NTSC), 50Hz (PAL)
25
Specifications
Focal Length
3.24mm (WIDE), 86mm (TELE)
OSD(On Screen Display) English
Power requirement
Video output
12V DC UL Listed, Class 2 Power Supply only
Composite Output 75Ω Terminated / Y,C Separated
5.3W
Power consumption
operating temperature
Operating Humidity
Storage temperature
Dimensions
0°C - 45°C
0% RH - 60% RH
-20°C - 60°C, 0% RH - 85% RH
57mm(W) X 62.4mm(H) X 98.5mm(D)
Weight
500g
Specifications are subject to change without notice.
26
P/NO: MFL30580130
|