LG Electronics DVD Player LDA 511 User Manual

DF9921NH_HA1ULL_ENG  
DVD PLAYER  
OWNER’S MANUAL  
MODEL : LDA-511  
Before connecting, operating or adjusting this product,  
please read this instruction booklet carefully and completely.  
© Copyright 2005, LG Electronics U.S.A., Inc.  
 
Still Picture and Frame-by-Frame Playback . . .19  
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . .19  
Random . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . .19  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
3D Surround . . . . . . . . . . . . . . . . . . . . . .19  
Time Search . . . . . . . . . . . . . . . . . . . . . . . .19  
Contents  
Introduction . . . . . . . . . . . . . . . . . . .4  
Symbol used in this Manual . . . . . . . . . . . . . .4  
About the  
Symbol Display . . . . . . . . . . . .4  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .4  
Handling Discs . . . . . . . . . . . . . . . . . . . . . .4  
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .4  
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . .4  
Types of Playable Discs . . . . . . . . . . . . . . . . .5  
Regional code . . . . . . . . . . . . . . . . . . . . . . . .5  
Disc-related terms . . . . . . . . . . . . . . . . . . . . .6  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .9  
Remote Control Operation . . . . . . . . . . . . . .9  
Remote Control Battery Installation . . . . . . .9  
Zoom  
. . . . . . . . . . . . . . . . . . . . . . . . . . .20  
. . . . . . . . . . . . . . . . . . .20  
Marker Search  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Special DVD Features . . . . . . . . . . . . . . . . .20  
Checking the contents of DVD discs: Menus .20  
Title Menu . . . . . . . . . . . . . . . . . . . . . . . .20  
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . .20  
Camera Angle . . . . . . . . . . . . . . . . . . . . .20  
Changing the Audio Language . . . . . . . . . .20  
Subtitles  
. . . . . . . . . . . . . . . . . . . . . . . . .20  
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . .21  
Moving to another GROUP . . . . . . . . . . . . .21  
Viewing another PAGE . . . . . . . . . . . . . . . .21  
Playing an Memory Card . . . . . . . . . . . . . . .22  
Playing an Audio CD or MP3/WMA Disc . . .23  
Audio CD and MP3 / WMA Disc Features . .24  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Moving to another Track . . . . . . . . . . . . . .24  
Repeat Track/All/Off . . . . . . . . . . . . . . . . .24  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Random . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . .24  
3D Surround . . . . . . . . . . . . . . . . . . . . . . .24  
Programmed Playback . . . . . . . . . . . . . . . .25  
Repeat Programmed Tracks . . . . . . . . . . .25  
Erasing a Track from Program List . . . . . .25  
Erasing the Complete Program List . . . . . .25  
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . .26  
Slide Show . . . . . . . . . . . . . . . . . . . . . . . .26  
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .26  
Moving to another File . . . . . . . . . . . . . . . .26  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
To rotate picture . . . . . . . . . . . . . . . . . . . . .26  
To listen to MP3/WMA music watching  
Installation and Setup . . . . . . . . . .10  
Setting up the Player . . . . . . . . . . . . . . . . . .10  
DVD Player Connections . . . . . . . . . . . . . . .10  
Video and Audio Connections to Your TV . .10  
Audio Connection to Your TV . . . . . . . . . . .10  
HDMI connection . . . . . . . . . . . . . . . . . . . .11  
Audio Connection to Optional Equipment . .12  
On-Screen Display . . . . . . . . . . . . . . . . . . . .13  
Playback Status/Restrictions . . . . . . . . . . .13  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .14  
General Operation . . . . . . . . . . . . . . . . . . .14  
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . .14  
• Menu Language . . . . . . . . . . . . . . . . . . .14  
• Disc Audio / Subtitle / Menu . . . . . . . . . .14  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .14  
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . .14  
• Display Mode . . . . . . . . . . . . . . . . . . . . .14  
• Progresive Scan . . . . . . . . . . . . . . . . . . .15  
• TV output select . . . . . . . . . . . . . . . . . . . .15  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
• Dolby Digital / DTS / MPEG . . . . . . . . . . .15  
• Sample Freq. (Frequency) . . . . . . . . . . . .15  
• Dynamic Range Control (DRC) . . . . . . .16  
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .16  
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . .16  
• B.L.E. (Black Level Expansion) . . . . . . . .16  
• DivX(R) VOD . . . . . . . . . . . . . . . . . . . . . .16  
LOCK (Parental Control) . . . . . . . . . . . . . .17  
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . .17  
• Password (Security Code) . . . . . . . . . . . .17  
• Area Code . . . . . . . . . . . . . . . . . . . . . . .17  
picture . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Maintenance and Service . . . . . . . . . . . . . . .27  
Playing a DivX Movie Disc . . . . . . . . . . . . . .28  
Additional Features . . . . . . . . . . . . . . . . . . .29  
Last Scene Memory . . . . . . . . . . . . . . . . . .29  
Screen Saver . . . . . . . . . . . . . . . . . . . . . . .29  
Video Mode Setting . . . . . . . . . . . . . . . . . . . .29  
Controlling other TVs with the remote control . . .29  
Reference . . . . . . . . . . . . . . . . . . . .30  
Controlling Your TV with the Supplied Remote .30  
Language Codes . . . . . . . . . . . . . . . . . . . . . . .31  
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .32  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .33  
Operation . . . . . . . . . . . . . . . . . . . .18  
Playing a DVD or Video CD . . . . . . . . . . . . .18  
Playback Setup  
. . . . . . . . . . . . . . . . . . .18  
General Features . . . . . . . . . . . . . . . . . . . . .18  
Moving to another TITLE/GROUP . . . . . . .18  
Moving to another CHAPTER/TRACK . . . .18  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Changing the Audio Channel . . . . . . . . . .18  
3
 
Introduction  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain for future  
reference.  
About the  
Symbol Display  
” may appear on your TV display during  
operation and indicates that the function explained in  
this owner’s manual is not available on that specific  
DVD video disc.  
This manual provides information on the operation  
and maintenance of your DVD player. Should the unit  
require service, contact an authorized service location.  
Notes on Discs  
Symbol Used in this Manual  
Handling Discs  
Do not touch the playback side of the disc. Hold the  
disc by the edges so that fingerprints do not get on  
the surface. Never stick paper or tape on the disc.  
The lightning flash symbol alerts you to the  
presence of dangerous voltage within the  
product enclosure that may constitute a risk of  
electric shock.  
The exclamation point alerts you to the  
presence of important operating and  
maintenance / servicing instructions.  
Indicates hazards likely to cause harm to the  
unit itself or other material damage.  
Storing Discs  
After playing, store the disc in its case. Do not expose  
the disc to direct sunlight or sources of heat and never  
leave it in a parked car exposed to direct sunlight.  
Note:  
Indicates special notes and operating features.  
Cleaning Discs  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center out.  
Tip:  
Indicates tips and hints for making the task easier.  
A section whose title has one of the following symbols  
is applicable only to the disc represented by the  
symbol.  
DVD-V  
DVD and finalized DVD R/RW  
DVD-A  
DVD Audio discs  
VCD  
Video CDs  
CD  
Audio CDs  
MP3  
MP3 Discs  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
WMA  
WMA Discs  
JPEG  
JPEG Discs  
DivX  
DivX Discs  
M/C Memory Card  
4
 
Types of Playable Discs  
Regional code  
This DVD player is designed and  
manufactured for playback of region “1”  
encoded DVD software. This unit can  
play only DVD discs labeled “1” or “ALL”.  
DVD  
1
(8 cm / 12 cm disc)  
DVD audio discs  
(8 cm / 12 cm disc)  
Notes on Regional Codes  
Video CD (VCD)  
(8 cm / 12 cm disc)  
• Most DVD discs have a globe with one or more  
numbers in it clearly visible on the cover. This  
number must match your DVD player’s regional  
code or the disc cannot play.  
Audio CD  
(8 cm / 12 cm disc)  
• If you try to play a DVD with a different region code  
from your player, the message “Check Regional  
Code” appears on the TV screen.  
In addition, this unit plays Memory Card, DivX file,  
DVD -R, DVD +R, DVD -RW, DVD +RW, SVCD, and  
CD-R / CD-RW that contains audio titles, MP3, WMA,  
and/or JPEG files.  
Notes on Copyrights:  
It is forbidden by law to copy, broadcast, show,  
broadcast via cable, play in public, or rent copyrighted  
material without permission. This product features the  
copy protection function developed by Macrovision.  
Copy protection signals are recorded on some discs.  
When recording and playing the pictures of these  
discs picture noise will appear. This product  
incorporates copyright protection technology that is  
protected by method claims of certain U.S. patents  
and other intellectual property rights owned by  
Macrovision Corporation and other rights owners. Use  
of this copyright protection technology must be  
authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
Notes:  
• Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD -R, DVD +R,  
DVD -RW, DVD +RW) disc itself, some CD-R/RW  
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs  
cannot be played on the unit.  
• Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
• Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal) since they may result in  
malfunctions.  
Notes on DVDs and Video CDs  
Some playback operations of DVDs and Video CDs  
may be intentionally programmed by software  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED THAT  
THE USER SWITCH THE CONNECTION TO THE  
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE  
QUESTIONS REGARDING OUR TV SET  
manufacturers. This unit plays DVDs and Video CDs  
according to disc content designed by the software  
manufacturer, therefore some playback features may  
not be available or other functions may be added.  
Manufactured under license from Dolby  
Laboratories. “Dolby”, “Pro Logic”, and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
COMPATIBILITY WITH THIS MODEL 525p DVD  
PLAYER, PLEASE CONTACT OUR CUSTOMER  
SERVICE CENTER.  
DTS and DTS Digital Out are trademarks of  
Digital Theater Systems, Inc.  
5
 
PBC: Playback Control (Video CD only)  
Playback control is available for Video CD (VCD)  
version 2.0 disc formats. PBC allows you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, still  
pictures of high resolution can be played if they are  
included in the disc. Video CDs not equipped with  
PBC (Version 1.1) operate in the same way as audio  
CDs.  
Disc-related terms  
DVD R / DVD RW  
DVD -R and DVD +R are two different standards for  
recordable DVD drives and discs. This format allows  
information to be recorded onto the DVD disc only  
once. DVD +RW and DVD -RW are two standards for  
re-writable media, meaning the DVD content can be  
erased and re-recorded.  
Title (DVD video discs only)  
VCD (Video CD)  
A title is generally a distinct section of a DVD disc. For  
example the main feature could be title 1, a  
documentary describing how the film was made could  
be title 2, and cast interviews could be title 3. Each  
title is assigned a reference number enabling you to  
locate it easily.  
A VCD holds up to 74 minutes (650 MB disc) or 80  
minutes (700 MB disc) of MPEG-1 full-motion video  
along with quality stereo sound.  
MPEG  
MPEG is an international standard for video and audio  
compression. MPEG-1 is used in encoding video for  
VCD and provides for multichannel surround sound  
coding such as PCM, Dolby Digital, DTS and MPEG  
audio.  
Chapter (DVD video discs only)  
A chapter is a segment of a title such as a scene in a  
film or one interview in a series. Each chapter is  
assigned a chapter number, enabling you to locate the  
chapter you want. Depending on the disc, chapters  
may not be recorded.  
MP3  
MP3 is a popular compression format used for digital  
audio files that yields very high near-CD quality.  
Group (DVD audio discs only)  
The main audio content or accompanying feature  
content or additional feature content, or music  
album.Each group is assigned a group reference  
number enabling you to locate it easily.  
WMA  
Windows media audio file. A type of coding / decoding  
developed by Microsoft Corp.  
JPEG  
Scene (VCD)  
Joint Pictures Expert Group. JPEG is a compressed  
file format that allows you to save images with no limit  
on the number of colors.  
On a video CD with PBC (playback control) functions,  
moving pictures and still pictures are divided into  
sections called “scenes”. Each scene is displayed in  
the menu screen and assigned a scene number,  
enabling you to locate the scene you want. A scene is  
composed of one or several tracks.  
DivX  
DivX is the name of a revolutionary new video codec  
which is based on the new MPEG-4 compression  
standard for video.You will be able to play DivX  
movies using this DVD player.  
Track  
A distinct element of audiovisual information, such as  
the picture or sound track for a specific language  
(DVD), or a musical piece on a video or audio CD.  
Each track is assigned a track number, enabling you  
to locate the track you want. DVD discs allow one  
track of video (with multiple angles) and several tracks  
of audio.  
6
 
Front Panel  
POWER  
Switches the player ON and OFF.  
PLAY ( N )  
Starts playback.  
STOP ( x ) Stops playback.  
RESOLUTION  
You can change the resolution depending on your TV.  
3D SOUND  
Selects 3DSURROUND during  
playback.  
MEMORY CARD  
Accesses the menu for memory card.  
OPEN / CLOSE ( Z )  
Opens or closes the disc  
MEMORY CARD Slot  
Insert a memory card.  
(CF, MD, MMC, SD, MS,  
MS-Pro or xD).  
Disc slot  
Insert a disc here.  
Display window  
Shows the current status  
of the player.  
Remote Sensor  
Point the DVD Player remote control  
here.  
7
 
Rear Panel  
COAXIAL (Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
AUDIO OUT (Left/Right)  
Connect to an amplifier, receiver,  
or stereo system.  
VIDEO OUT  
Connect to a TV with video inputs.  
OPTICAL (Digital audio out jack)  
Connect to digital (optical) audio equipment.  
COMPONENT VIDEO OUT / (480p / 720p / 1080i)  
Connect to a TV with Y Pb Pr inputs.  
AC Power Cord  
Plug into the power source.  
S-VIDEO OUT  
Connect to a TV with S-Video inputs.  
HDMI OUT  
HDMI output providing a high quality interface for  
digital audio and video.  
8
 
Remote Control  
OPEN / CLOSE  
TV Control Buttons  
Opens or closes the disc.  
TV POWER:  
POWER  
Turns the TV on or off.  
Switches DVD Player ON and OFF.  
TV PR/CH +/–:  
0-9 number buttons  
Selects TV’s channel.  
Selects numbered items in a menu.  
TV VOL +/–:  
CLEAR  
Removes a track number on the  
program list or a mark on the  
MARKER SEARCH menu.  
Adjusts TV’s volume.  
AV:  
Selects the TV’s source.  
SKIP (. / >)  
SCAN ( m / M )  
Search backward or forward.  
Go to next chapter or track.  
Returns to beginning of current  
chapter or track or go to  
previous chapter or track.  
PAUSE / STEP ( X )  
Pauses playback temporarily/ press  
repeatedly for frame-by-frame  
playback.  
STOP ( x )  
Stops playback.  
PLAY ( N )  
Starts playback.  
TITLE  
Displays title menu, if available.  
DVD MENU  
Accesses menu on a DVD disc.  
RETURN  
Removes the setup menu,  
displays the video CD with PBC.  
b B v V (left/right/up/down) •  
Selects an item in the menu.  
• MARKER  
Marks any point during  
playback.  
ENTER •  
Confirms menu selection.  
• SEARCH  
DISPLAY  
Displays MARKER SEARCH  
menu.  
Accesses On-Screen display.  
AUDIO •  
• PROGRAM  
Selects an audio language (DVD).  
Places a track on the program  
list.  
SUBTITLE •  
Selects a subtitle language.  
• ZOOM  
Enlarges video image.  
ANGLE •  
Selects a DVD camera angle if  
available  
• REPEAT  
Repeat chapter, track, title,  
group, all.  
SETUP •  
Accesses or removes setup menu.  
• A-B  
Repeat sequence.  
• RANDOM  
Plays tracks in random order.  
• * This button is not available.  
Remote Control Operation  
Remote Control Battery installation  
Point the Remote Control at the remote sensor and  
press the buttons.  
Detach the battery cover on the rear of the  
remote control, and insert two batteries  
(size AAA) with  
and  
aligned correctly.  
Do not mix old and new batteries and never  
mix different types of batteries such as  
standard, alkaline, etc.  
9
 
Installation and Setup  
S-Video: Connect the S-VIDEO OUT jack on the  
DVD Player to the S-Video in jack on the TV using  
the S-Video cable (S)  
Setting up the Player  
The picture and sound of a nearby TV, VCR, or radio  
may be distorted during playback. If this occurs,  
position the player away from the TV, VCR, or radio,  
or turn off the unit after removing the disc.  
Component Video : Connect the COMPONENT  
VIDEO OUT / (480p / 720p / 1080i) jacks on the  
DVD Player to the corresponding in jacks on the  
TV using an Y Pb Pr cable (C).  
DVD Player Connections  
• If your television is a high-definition or  
“digital ready” television, you may take  
advantage of displaying the highest video  
resolution possible.  
• If your TV does not accept your resolution  
setting, the picture will appear scrambled.  
Depending on your TV and other equipment there are  
various ways you can connect the player. Please refer  
to the manuals of your TV, stereo system or other  
devices as necessary for additional connection  
information.  
Resolution setting  
You can change the resolution for the COMPONENT  
VIDEO OUT / (480p / 720p / 1080i) video output by  
pressing RESOLUTION on the front panel. Available  
resolution settings are as shown below.  
OUTPUT  
CONNECTION  
HDMI  
VIDEO OUT  
COMPONENT  
VIDEO OUT  
VIDEO OUT  
S-VIDEO  
Available  
Resolution  
1080i/ 720p  
480p/ 480i  
1080i/ 720p  
480p/ 480i  
480i  
1
1
1
1
1
480i  
Notes:  
• For 720p and 1080i resolution, only non-copy  
protected discs can be played back. If the disc is  
copy protected, it will be displayed at the 480p  
resolution.  
• 1080i and 720p do not work with the analog video  
connections (VIDEO OUT & S-VIDEO).  
Video and Audio Connections to Your TV  
Make sure the DVD player is connected directly to the  
TV and not to a VCR, otherwise the DVD image could  
be distorted by the copy protection system.  
Audio: Connect the left and right AUDIO OUT  
jacks of the DVD Player to the audio left and right  
IN jacks on the TV (A) using the audio cables.  
Do not connect the DVD Player’s AUDIO OUT jack  
to the phone in jack (record deck) of your audio  
system.  
Video: Connect the VIDEO OUT jack on the DVD  
player to the video in jack on the TV using the  
video cable (V).  
10  
 
HDMI connection  
HDMI compatible TV  
If you have a HDMI TV or monitor, you can connect it  
to this player using a HDMI cable.  
HDMI  
1. Connect the HDMI OUT jack on the player to the  
HDMI jack on a HDMI compatible TV or monitor  
(H).  
H
2. Set the TV’s source to HDMI (refer to TV’s Owner’s  
manual).  
3. Press RESOLUTION repeatedly to select the  
resolution you wish to change to then press PLAY.  
Notes :  
Rear of DVD player  
• The arrow on the cable connector body should face  
up for correct alignment with the connector on the  
player.  
About HDMI  
HDMI (High Definition Multimedia Interface) supports  
both video and audio on a single digital connection for  
use with DVD Players, Set-Top Boxes, and other AV  
devices.  
HDMI was developed to provide the technologies of  
HDCP (High Definition Contents Protection). HDCP is  
used to protect digital content transmitted and  
received.  
HDMI has the capability to support standard,  
enhanced, or high-definition video plus standard to  
multi-channel surround-sound audio, HDMI features  
include uncompressed digital video, a bandwidth of up  
to 5 gigabytes per second, one connector (instead of  
several cables and connectors), and communication  
between the AV source and AV devices such as  
DTVs.  
• If there is noise or lines on the screen, please  
check the HDMI cable.  
• Not all HDCP-compatible DVI devices will work with  
this DVD player.  
-It’s impossible copy protected DVD title’s playback  
in non -HDCP devices (TV, Monitor etc.).  
Tip:  
HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI licensing LLC.  
When you use HDMI connection, you can change the  
resolution (480p, 720p, 1080i) for the HDMI output by  
pressing RESOLUTION on the front panel.  
You can only change the resolution within your TV’s  
and Monitor’s resolution capabilities.  
11  
 
Amplifier equipped with 2-channel analog stereo  
or Dolby Pro Logic ll / Pro Logic: Connect the left  
and right AUDIO OUT jacks on the DVD Player to the  
audio left and right IN jacks on your Amplifier,  
Receiver, or Stereo System, using the audio cables  
(A).  
Audio Connection to Optional Equipment  
Connect the DVD player to your optional equipment  
for audio output.  
Rear of DVD player  
Amplifier equipped with 2-channel digital stereo  
(PCM) or Audio / Video Receiver equipped with a  
multi-channel decoder (Dolby Digital™, MPEG 2,  
or DTS): Connect one of the DVD Player’s DIGITAL  
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the  
corresponding in jack on your Amplifier. Use an  
optional digital (optical O or coaxial X) audio cable.  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel Audio  
/ Video Receiver that supports one or more of the  
audio formats supported by your DVD Player such as  
MPEG 2, Dolby Digital and DTS. Check the Receiver  
manual and the logos on the front of the Receiver.  
X
A
O
Notes:  
If the audio format of the digital output does not  
match the capabilities of your Receiver, the Receiver  
produces a strong, distorted sound or no sound at all.  
L
R
COAXIAL  
OPTICAL  
DIGITAL INPUT  
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
• Six Channel Digital Surround Sound via a digital  
connection can only be obtained if your Receiver is  
equipped with a Digital Multi-channel decoder.  
To see the audio format of the current DVD in the  
on-screen display, press AUDIO.  
12  
 
Example: On-Screen Display during  
playing DVD Video  
On-Screen Display  
You can display the general playback status on the TV  
screen. Some items can be changed using the menu.  
To use the on-screen display:  
Items  
Selection Method  
b
/
B
ENTER  
, Numbers  
Title Number  
1 / 3  
1. Press DISPLAY during playback.  
b
/
B
ENTER  
, Numbers  
Chapter Number  
Time search  
1 / 12  
2. Press v / V to select an item.  
The selected item is highlighted.  
Numbers, ENTER  
0:20:09  
3. Press b / B to change the setting. You can also  
use the number buttons if appropriate (e.g.  
inputting the title number). For some functions,  
press ENTER to execute the setting.  
Audio language  
and Digital Audio  
Output mode  
b
AUDIO  
/
B
or  
b
/
B
or  
Subtitle language  
Angle  
ABC  
1 ENG  
1 / 3  
SUBTITLE  
Notes:  
Some discs may not provide all of the features  
shown below.  
b
ANGLE  
/
B
or  
3D SUR  
Sound  
• If no button is pressed for 10 seconds, the on-  
screen display disappears.  
b
/
B
Playback Status/Restrictions  
Example: On-Screen Display during  
playing VCD  
Title  
Repeat title  
A - B  
Repeat sequence  
Items  
Selection Method  
1 / 9  
Enter a Marker  
b
/
B, Numbers  
Track Number  
(or PBC mode)  
1 / 3  
ENTER  
MARKER SEARCH  
Marker Search menu  
Numbers  
ENTER  
Time search  
0:20:09  
Resume play from this point  
Action prohibited or not available  
b
AUDIO  
/
B
or  
Audio Channel  
Sound  
3D SUR  
b
/
B
Example: On-Screen Display during  
playing DVD Audio  
Example: On-Screen Display during  
playing divx movie disc  
Items  
Selection Method  
Items  
Selection Method  
b
/
B
ENTER  
, Numbers  
b
/
B
ENTER  
, Numbers  
Track Number  
1 / 3  
Group Number  
b
/
B
ENTER  
, Numbers  
Numbers, ENTER  
Time search  
0:20:09  
Track Number  
Time search  
Display only  
or  
0:20:09  
Audio language  
and Digital Audio  
Output mode  
1
b
/
B
or  
MP3  
AUDIO  
DVD Audio  
b
/
B
Output mode  
AUDIO  
b
/
B
or  
Subtitle language  
Sound  
ENG  
ABC  
SUBTITLE  
Subtitle language  
Page (or Angle)  
ABC  
OFF  
Display only  
3D SUR  
b
/
B
b
/
B
or  
or  
ANGLE  
1 / 3  
13  
 
LANGUAGE  
Initial Settings  
LANGUAGE  
By using the Setup menu, you can make various  
adjustments to items such as picture and sound. You  
can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see pages 14 to 17.  
English  
Original  
Off  
Menu Language  
Disc Audio  
Disc Subtitle  
Disc Menu  
Original  
To display and exit the Menu:  
Move  
Select  
Press SETUP to display the menu. A second press of  
SETUP will take you back to initial screen.  
Menu Language  
Select a language for the Setup menu and on-screen  
display.  
To go to the next level:  
Press B on the Remote Control.  
To go back to the previous level:  
Press b on the Remote Control.  
DVD-V  
DVD-A  
Disc Audio / Subtitle / Menu  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
General Operation  
Original: Refers to the original language in which the  
disc was recorded.  
1. Press SETUP. The Setup menu appears.  
2. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well as  
alternate setting(s).  
Other: To select another language, press number  
buttons then ENTER to enter the corresponding 4-digit  
number according to the language code list in the  
reference chapter. If you enter the wrong language code,  
press CLEAR.  
3. Use v / V to select the second desired option then  
press B to move to the third level.  
4. Use v / V to select the desired setting then press  
ENTER to confirm your selection. Some items  
require additional steps.  
5. Press SETUP or PLAY to exit the Setup menu.  
14  
 
DISPLAY  
DVD-V  
DVD-A  
Sample Freq. (Frequency)  
DISPLAY  
If your Receiver or Amplifier is NOT capable of  
handling 96 kHz signals, select 48 kHz. When this  
choice is made, this unit automatically converts any 96  
kHz signals to 48 kHz so your system can decode  
them.  
TV Aspect  
16  
:
9
Display Mode  
Widescreen  
If your Receiver or Amplifier is capable of handling 96  
kHz signals, select 96 kHz. When this choice is made,  
this unit passes each type of signal through without  
any further processing.  
Move  
Select  
DVD-V  
DVD-A  
Check the documentation for your Amplifier to verify  
its capabilities.  
TV Aspect  
4:3: Select when a standard 4:3 TV is connected.  
16:9: Select when a 16:9 TV is connected.  
Dynamic Range Control (DRC)  
DVD-V  
DVD-A  
DivX  
DVD-V  
DVD-A  
Display Mode  
With the DVD format, you can hear a program’s  
soundtrack in the most accurate and realistic  
presentation possible, thanks to digital audio  
technology. However, you may wish to compress the  
dynamic range of the audio output (the difference  
between the loudest sounds and the quietest ones).  
This allows you to listen to a movie at a lower volume  
without losing clarity of sound. Set DRC to On for this  
effect.  
Display Mode setting works only when the TV Aspect  
mode is set to “4:3”.  
Letterbox: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
Panscan: Automatically displays the wide picture on the  
entire screen and cuts off the portions that do not fit.  
DVD-V  
Vocal  
AUDIO  
Set to On only when a multi-channel karaoke DVD is  
playing. The karaoke channels on the disc mix into  
normal stereo sound.  
Each DVD disc has a variety of audio output options.  
Set the player’s AUDIO options according to the type  
of audio system you use.  
AUDIO  
Dolby Digital  
DTS  
Bitstream  
Bitstream  
PCM  
MPEG  
Sample Freq.  
48 kHz  
DRC  
On  
On  
Vocal  
Move  
Select  
DVD-V  
DVD-A  
DivX  
Dolby Digital / DTS / MPEG  
Bitstream: Select “Bitstream” if you connect the  
DVD Player’s DIGITAL OUT jack to an Amplifier or  
other equipment with a Dolby Digital, DTS or  
MPEG decoder.  
PCM: Select when connected to a two-channel  
digital stereo amplifier. DVDs encoded in Dolby  
Digital or MPEG will be automatically downmixed  
to two-channel PCM audio.  
Off (for DTS): If you select “Off”, the DTS signal is  
not output through the DIGITAL OUT jack.  
15  
 
OTHERS  
DivX  
DivX(R) VOD  
The PBC, Auto Play, B.L.E. and DivX(R) VOD settings  
can be changed.  
You can display the DivX DRM (Digital Rights  
Management) Registration code for your unit.  
OTHERS  
PBC  
On  
Auto Play  
B.L.E.  
Off  
On  
DivX(R) VOD  
Select  
The Registration code is used for VOD (Video-On-  
Demand) service agent. You can purchase or rent an  
encrypt movie file.  
Select  
Move  
PBC VCD  
Notes:  
Set Playback Control (PBC) to On or Off.  
If you rent the DivX VOD file, it has several options of  
viewing limits as shown below.  
On: Video CDs with PBC are played according to  
the PBC.  
Display the number which you can watch the file.  
Off: Video CDs with PBC are played the same way  
as Audio CDs.  
DVD-V  
Auto Play  
You can set up the DVD Player so a DVD disc  
automatically starts playing whenever the DVD is  
inserted.  
If Auto Play mode is set to On, this DVD player will  
search for title that has the longest playback time and  
then play back the title automatically.  
The rental has been expired.  
On: Auto Play function is active.  
Off: Auto Play function is not active.  
Note:  
The Auto Play function may not work for some DVDs.  
Display the authorization error.  
B.L.E. (Black Level Expansion)  
To select the black level of playback pictures. Set your  
preference and monitor’s ability.  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
Note:  
The B.L.E. function can be operated only in NTSC  
system.  
16  
 
Password (Security Code)  
LOCK (Parental Control)  
You can enter or change password.  
LOCK  
Rating  
Unlock  
New  
1. Select Password on the LOCK menu then press B.  
Password  
Area Code  
U S  
2. Follow step 2 as shown left (Rating). “Change” or  
“New” is highlighted.  
3. Enter the new 4-digit code, then press ENTER.  
Input it again to verify.  
Move  
Select  
4. Press SETUP to exit the menu.  
DVD-V  
Rating  
If you forget your Security Code  
Some movies contain scenes that may not be suitable  
for children to view. Many of these discs contain  
parental control information that applies to the  
complete disc or to certain scenes on the disc. Movies  
and scenes are rated from 1 to 8, depending on the  
country. Some discs offer more suitable scenes as an  
alternative.  
If you forget your security code you can clear it using  
the following steps:  
1. Remove any disc from the unit.  
2. Press SETUP to display the Setup menu.  
3. Input the 6-digit number “210499” and the security  
code is cleared.  
The parental control feature allows you to block  
access to scenes below the rating you input, thereby  
preventing your children from being able to view  
material you believe is unsuitable.  
4. Enter a new code as described above.  
DVD-V  
Area Code  
1. Select “Rating” on the LOCK menu then  
press B.  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list in  
the reference chapter.  
2. To access the Rating, Password and Area Code  
features, you must input the 4-digit security code  
you created. If you have not yet entered a security  
code you are prompted to do so.  
1. Select “Area Code” on the LOCK menu then  
press B.  
Input a 4-digit code and press ENTER. Enter it  
again and press ENTER to verify. If you make a  
mistake before pressing ENTER, press CLEAR.  
2. Follow step 2 as shown left (Rating).  
3. Select the first character using v / V buttons.  
4. Press ENTER and select the second character  
3. Select a rating from 1 to 8 using the v / V buttons.  
using v / V buttons.  
Rating 1-8: Rating one (1) has the most  
restrictions and rating eight (8) is the least  
restrictive.  
5. Press ENTER to confirm your area code selection.  
Unlock  
If you select unlock, parental control is not active  
and the disc plays in full.  
Note:  
If you set a rating for the player, all disc scenes with  
the same rating or lower are played. Higher rated  
scenes are not played unless an alternate scene is  
available on the disc. The alternative must have the  
same rating or a lower one. If no suitable alternative is  
found, playback stops. You must enter the 4-digit  
password or change the rating level in order to play  
the disc.  
4. Press ENTER to confirm your rating selection, then  
press SETUP to exit the menu.  
17  
 
Operation  
General Features  
Playing a DVD or Video CD  
Note:  
Unless stated otherwise, all operations described use  
the Remote Control. Some features may also be  
available on the Setup menu.  
Playback Setup  
1. Turn on the TV and select the video input source  
connected to the DVD Player.  
Moving to another TITLE/GROUP  
2. Turn on the Audio System (if applicable) and  
select the input source connected to the DVD  
player.  
DVD-V  
DVD-A  
When a disc has more than one title/group, you can  
move to another title/group. Press DISPLAY while  
playback is stopped then the appropriate number (0-9)  
or use b / B to move to another title/group.  
You can play any title by inputting its number while  
playback is stopped.  
3. Insert your chosen disc to the disc slot with the  
playback side down. Playback starts automatically.  
If playback does not start, press PLAY.  
In some cases, the disc menu might appear  
instead:  
DVD-V  
Moving to another CHAPTER/TRACK  
Use the b B v V buttons to select the title/chapter  
you want to view, then press ENTER to start.  
Press TITLE or DVD MENU to return to the menu  
screen.  
DVD-V  
DVD-A  
VCD  
DivX  
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to  
another chapter/track as follows:  
DVD-A  
Use the 1 2 3 4 buttons to select an option you  
want, then press ENTER to view the option.  
Press SKIP . or > briefly during playback to  
select the next chapter/track or to return to the  
beginning of the current chapter/track.  
VCD  
Use the number buttons to select the track you  
want to view and press RETURN to return to the  
menu screen. Menu settings and operating  
procedures may differ. Follow the instructions on  
the each menu screen. You also may set PBC to  
Off (See “PBC” on page 16).  
Press SKIP . twice briefly to step back to the  
previous chapter/track.  
To go directly to any chapter during DVD playback,  
press DISPLAY and press v / V to select the  
chapter/track icon. Then, input the chapter/track  
number or use b / B.  
Notes:  
• If parental control is set and the disc is not within  
the rating settings you must input the password.  
(See “Lock Menu” on page 17.)  
DVD-V  
DVD-A  
VCD  
DivX  
Search  
1. Press SCAN (m or M) during playback.  
• DVDs may have a region code. Your player does  
not play discs that have a region code different from  
your player. The region code for this player is 1  
(one).  
2. Press SCAN (m or M) repeatedly to select the  
required speed.  
DVD, DivX disc; X2, X4, X16 or X100  
Video CD; X2, X4 or X8  
3. To exit SEARCH mode, press PLAY.  
Note:  
When using a DVD audio disc that includes pictures,  
this operation may be permitted in some picture  
segments.  
Changing the Audio Channel VCD  
Press AUDIO repeatedly during playback to hear a  
different audio channel (Stereo, Left, or Right).  
18  
 
Still Picture and Frame-by-Frame Playback  
DVD-V  
DVD-A  
VCD  
DivX  
Repeat  
DVD-V  
DVD-A  
VCD  
DivX  
You can play a title/chapter/all/track/group on a disc.  
Press REPEAT during playback to select a desired  
repeat mode.  
1. Press PAUSE/STEP on the remote control during  
playback. Advance the picture frame-by-frame by  
pressing PAUSE/STEP repeatedly.  
DVD Video Discs - Repeat Chapter/Title/Off  
• Chapter: repeats the current chapter.  
• Title: repeats the current title.  
2. To exit still motion mode, press PLAY.  
Note:  
• Off : does not play repeatedly.  
When using a DVD audio disc that includes pictures,  
this operation may be permitted in some picture  
segments.  
Video CDs, DivX discs - Repeat Track/All/Off  
• Track : repeats the current track  
• All : repeats all the tracks on a disc.  
• Off : does not play repeatedly.  
DVD-V  
DVD-A  
VCD  
DivX  
Slow Motion  
DVD Audio Discs - Repeat Track/Group/Off  
• Track: repeats the current track.  
• Group: repeats the current Group.  
• Off : does not play repeatedly.  
1. Press PAUSE/STEP (X) during playback.  
The DVD player will now go into PAUSE mode.  
2. Use the SCAN (m or M) to select the required  
speed: t 1/16, t 1/8, t 1/4, or t 1/2  
(backward), or T 1/16, T 1/8, T 1/4, or T 1/2  
(forward).  
Notes:  
• On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the repeat function (See “PBC” on  
page 16).  
With a DivX Disc or Video CD, the Slow speed  
changes: T 1/16, T 1/8, T 1/4 or T 1/2  
(forward).  
• If you press SKIP (>) once during Repeat Chapter  
(Track) playback, the repeat playback cancels.  
3. To exit Slow Motion mode, press PLAY (N).  
DVD-V  
VCD  
DivX  
3D Surround  
Notes:  
To produce a 3D surround effect that simulates multi-  
channel audio from two stereo speakers (instead of  
the five+ speakers normally required for multi-channel  
audio from a home theater system).  
Slow motion playback in reverse is not possible with  
Video CDs and DivX Discs.  
When using a DVD audio disc that includes pictures,  
this operation may be permitted in some picture  
segments.  
1. Press DISPLAY during playback.  
2. Use 3 or 4 to select the sound option.  
VCD  
Karaoke DVD  
Random  
The sound option will be highlighted.  
1. Press RANDOM during playback. The unit  
automatically begins random playback and  
RANDOM appears on the TV screen.  
3. Use 1 or 2 to to select “3D SUR”.  
To turn off the 3D Surround effect, select “Normal”.  
2. Press RANDOM again to normal.  
DVD-V  
VCD  
DivX  
Time Search  
Tip:  
To start playing at any chosen time on the disc:  
By pressing SKIP > during random playback, the unit  
1. Press DISPLAY during playback. The time search  
box shows the elapsed playing time.  
selects another title (track) and resumes random playback.  
Note:  
2. Press v / V to select the time clock icon  
On a Video CD with PBC, You must set PBC to Off on the  
setup menu to use the random function  
(See “PBC” on page 16).  
and “-:--:--” appears.  
3. Input the required start time in hours, minutes, and  
seconds from left to right. If you enter the wrong  
numbers, press CLEAR to remove the numbers  
you entered. Then input the correct numbers.  
DVD-V  
DVD-A  
VCD  
DivX  
Repeat A-B  
To repeat a sequence.  
4. Press ENTER to confirm. Playback starts from the  
selected time.  
1. Press A-B at your chosen starting point. “ A  
appears briefly on the TV screen.  
*
2. Press A-B again at your chosen end point.  
“A B” appears briefly on the TV screen and the  
repeat sequence begins.  
3. Press A-B again to cancel.  
19  
 
Special DVD Features  
DVD-V  
DVD-A  
VCD  
DivX  
Zoom  
Use zoom to enlarge the video image.  
Checking the contents of DVD discs: Menus  
DVDs may offer menus that allow you to access  
special features. To use the disc menu, press DVD  
MENU. Input the corresponding number or use the  
b B v V buttons to highlight your selection.  
Then press ENTER.  
1. Press ZOOM during playback or still playback to  
activate the Zoom function. The square frame  
appears briefly in the right bottom of the picture.  
2. Each press of the ZOOM button changes the TV  
screen in the sequence: 100% size 400% size  
1600% size screen fit mode 100% size  
DVD-V  
DVD-A  
Title Menu  
Screen fit mode:  
You can change the way the image appears on  
the screen when you’re playing a DVD movie.  
Press 3/4 to select between Normal, Enhanced,  
and Maximum.  
1. Press TITLE. If the current title has a menu, the  
menu appears on the screen. Otherwise, the disc  
menu may appear.  
2. The menu offers features such as camera angles,  
spoken language and subtitle options, and  
chapters for the title.  
3. Use the b B v V buttons to move through the  
zoomed picture.  
4. To resume normal playback, press CLEAR.  
3. Press TITLE to exit.  
Notes:  
• Zoom may not work on some DVDs.  
DVD-V  
DVD-A  
Disc Menu  
• Screen fit mode is available for playing the DVD disc and  
movie file.  
Press DVD MENU and the disc menu is displayed.  
Press DVD MENU again to exit.  
DVD-V  
VCD  
DivX  
Marker Search  
DVD-V  
DVD-A  
Camera Angle  
To enter a Marker  
If the disc contains scenes recorded at different  
camera angles, you can change to a different camera  
angle during playback. Press ANGLE repeatedly  
during playback to select a desired angle. Note that  
the number of the current angle appears on the  
display.  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears on  
the TV screen briefly. Repeat to enter up to nine  
markers.  
To Recall or Clear a Marked Scene  
Tip:  
1. During disc playback, press SEARCH. The marker  
search menu appears on the screen.  
The angle indicator will blink on the TV screen during scenes  
recorded at different angles as an indication that angle  
switching is possible.  
2. Within 10 seconds, press b / B to select a marker  
number that you want to recall or clear.  
Changing the Audio Language  
3. Press ENTER and playback starts from the  
marked scene. Or, Press CLEAR and the marker  
number is erased from the list.  
DVD-V  
DVD-A  
DivX  
Press AUDIO repeatedly during playback to hear a  
different audio language or audio track.  
4. You can play any marker by inputting its number  
on the marker search menu.  
DVD-V  
DivX  
Subtitles  
DVD-V  
DVD-A  
VCD  
DivX  
Pause  
Press SUBTITLE repeatedly during playback to see  
the different subtitle languages.  
1. Press PAUSE/STEP during playback.  
2. To return to playback, press PLAY.  
Note:  
If there is no information or there is a code that can not read  
in the DivX file, “ 1 ” etc are displayed.  
20  
 
DVD Audio Discs  
Moving to another GROUP  
DVD Audio is a new disc format building on the  
success of DVD to provide high quality,  
uncompressed, multi-channel audio for a new  
experience in audio quality. A DVD Audio disc can be  
identified by the DVD audio logo on the disc jacket or  
on the disc itself.  
Some DVD Audio discs divide content into different  
groups. Your player enables you to quickly access  
different groups during playback via the on-screen  
display.  
1. Press DISPLAY during playback on in stop mode.  
2. Press 3/4to select Group icon.  
DVD Audio can provide higher quality stereo than  
Audio CDs with a sampling rate of up to 192kHz  
(compared to 44.1kHz for CDs). DVD Audio digital  
sound can be delivered with up to 24 bits of data  
(compared to 16 bits for a standard CD).  
3. Press 1/2 or the numbered buttons (0-9) to select  
a group number.  
Note:  
Sometimes the author of the disc creates hidden  
content that can only be accessed by entering a  
password. If the lock icon appears on the TV screen,  
enter the password (sometimes you’ll find it on the  
disc’s jacket cover or on a web site). This password  
control isn’t dictated by your DVD Player — it is a  
function of the disc.  
A typical DVD Audio disc contains up to seven times  
the data capacity of a CD. This additional space is  
used for music, either Advanced Resolution multi-  
channel sound quality that is closer to the artist’s  
master recording or for longer recordings. Many DVD  
Audio discs contain on-screen text, such as artist  
biographies, playlists, or lyrics. Some DVD Audio  
discs contain photo galleries or video clips.  
Since the authoring of DVD Audio Discs varies, some  
of the on-screen display choices might not be  
available for the disc you’re playing.  
Viewing another PAGE  
Since DVD Audio discs can hold a lot of content, there  
are various ways to see what’s available on the disc.  
1. Press DISPLAY during playback.  
2. Press 3/4to select Page icon.  
3. Press 1/2 to select a page number.  
What appears on the screen will vary from disc to  
disc because the information available depends  
upon the way the disc was created.  
Note:  
Since the authoring of DVD Audio Discs varies, some  
of the on-screen display choices might not be  
available for the disc you’re playing.  
21  
 
Cards capable of displaying  
Playing an Memory Card M/C  
You can play Photo, Music, and MOVIE files in  
Memory Cards with this DVD player.  
Readable Cards  
• Compact Flash Card (CFC)  
• Micro Drive (MD)  
• Secure Digital Card (SD)  
• Multi Media Card (MMC)  
• Memory Stick (MS)  
• Memory Stick Pro (MS-Pro)  
• eXtreme Digital picture Card (xD)  
- Compatible with: FAT 12, FAT 16, or FAT 32  
- Only use the memory cards recommended.  
1. Insert a Memory Card until it fits into place.  
2. Press MEMORY CARD on the front panel.  
The Memory Card slot choice menu appears on  
the TV screen.  
1
2
Regarding Write Protect  
For cards that have a write protect switch, if the switch  
is on it will not be possible to write or erase the  
contents of the card.  
Note:  
If both slots are connected with Memory Card,  
use b / B to select the desired Memory Card slot.  
Notes:  
• Keep the memory card out of reach of children.  
If swallowed, seek medical advice immediately.  
• This player can not format a memory card.  
• If you insert two memory cards simultaneously into  
the MS, MMC, SD, MS-Pro and xD memory cards  
compatible slot, files in the memory cards cannot be  
played.  
• The reading time depends on file size or resolution.  
• If a folder in your memory cards have more than  
645 files, the whole files are not available to read.  
3. Press ENTER.  
The menu appears.  
MUSIC  
PHOTO  
0:00:00  
List  
Program  
List  
Preview  
Music1  
Music2  
Music3  
Music4  
Music5  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
1
2
3
4
5
>>>  
Clear All  
DISPLAY Info  
PROGRAM Edit  
MUSIC Menu  
PHOTO Menu  
Caution  
Before you extract your memory cards, you should  
press the MEMORY CARD button to display the DVD  
menu screen. Otherwise you will lose your data in  
your memory card or the memory card can be  
damaged.  
MOVIE  
0:00:00  
List  
Movie Folder  
Movie Folder  
Movie Folder  
1
2
3
MOVIE Menu  
4. Press MEMORY CARD or RETURN to exit the  
menu.  
For details on each operation item,  
refer to relevant page.  
22  
 
Playing an Audio CD or MP3/WMA  
Disc  
MP3 / WMA disc compatibility with this player is  
limited as follows:  
• Sampling frequency: within 8 - 48 kHz (MP3),  
within 32 - 48kHz (WMA)  
• Bit rate: within 8 - 320kbps (MP3),  
32 - 192kbps (WMA)  
The DVD player can play MP3/WMA formatted  
recordings on CD-ROM, CD-R, or CD-RW discs.  
• The player cannot read an MP3/WMA file that has  
a file extension other than “.mp3” / “.wma”.  
• CD-R physical format should be ISO 9660  
• If you record MP3 / WMA files using software that  
cannot create a file system (eg. Direct-CD) it is  
impossible to playback MP3 / WMA files. We  
recommend that you use Easy-CD Creator, which  
creates an ISO 9660 file system.  
• File names should have a maximum of 8 letters  
and must incorporate an .mp3 or .wma extension.  
• They should not contain special letters such as /  
? * : “ < > l etc.  
Audio CD  
Once you insert an audio CD a menu appears on the  
TV screen. Press v / V to select a track then press  
PLAY or ENTER and playback starts.  
AUDIO CD  
0:52:07  
List  
1 / 12  
Program  
Track1  
Track2  
Track3  
Track4  
Track5  
Track6  
Track7  
Track8  
Clear All  
PROGRAM Edit  
• The total number of files on the disc should be  
less than 650.  
MP3 / WMA  
This DVD Player requires discs and recordings to  
meet certain technical standards in order to achieve  
optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are  
many different types of recordable disc formats  
(including CD-R containing MP3 or WMA files) and  
these require certain pre-existing conditions (see  
above) to ensure compatible playback.  
1. Press v / V to select a folder, and press ENTER  
to see the folder contents.  
2. Press v / V to select a track then press PLAY or  
ENTER. Playback starts.  
MUSIC  
0:00:00  
1 / 12  
List  
Program  
1-Music1  
2-Music2  
3-Music3  
4-Music4  
5-Music5  
6-Music6  
7-Music7  
Customers should note that permission is  
required in order to download MP3 / WMA files  
and music from the Internet. Our company has  
no right to grant such permission. Permission  
should always be sought from the copyright  
owner.  
Clear All  
DISPLAY Info  
PROGRAM Edit  
ID3 TAG  
• When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY.  
[ Title, Artist, Album, Year, Comment ]  
• If there is no information, “No ID3 TAG” appear on  
the display.  
Tips:  
• If you are in a file list on the MUSIC menu and want  
to return to the Folder list, use the v / V to highlight  
and press ENTER.  
• Press DVD MENU to move to the next page.  
• On a CD with MP3/WMA and JPEG you can switch  
MP3/WMA and JPEG. Press TITLE and MUSIC or  
PHOTO word on top of the menu is highlighted.  
23  
 
CD  
MP3  
M/C  
WMA  
Audio CD and MP3 / WMA Disc  
Features  
Random  
1. Press RANDOM during playback. Random  
Playback begins immediately and RANDOM  
appears on the menu screen.  
CD  
MP3  
M/C  
WMA  
Pause  
2. To return to normal playback, press RANDOM  
repeatedly until RANDOM disappears from the  
menu screen.  
1. Press PAUSE/STEP during playback.  
2. To return to playback, press PLAY, ENTER or  
press PAUSE/STEP again.  
Tip:  
By pressing SKIP > during random playback, the unit  
selects another track and resumes random playback.  
Moving to another Track  
CD  
MP3  
M/C  
WMA  
CD  
Repeat A-B  
1. Press SKIP (. or >) briefly during playback  
to go to the next track or to return to the beginning  
of the current track.  
1. To repeat a sequence during disc playback press  
A-B at your chosen starting point. The Repeat icon  
and “A” appear on the menu screen.  
2. Press SKIP . twice briefly to go back to the  
previous track.  
2. Press A-B again at your chosen end point. The  
Repeat icon and “A-B” appear on the menu  
screen, and the sequence begins to play  
repeatedly.  
3. You can play any track by inputting its number.  
(AUDIO CD only)  
Repeat Track/All/Off  
3. To exit the sequence and return to normal play,  
press A-B again. The Repeat icon disappears from  
the menu screen.  
CD  
MP3  
M/C  
WMA  
You can play a track/all on a disc.  
1. Press REPEAT when playing a disc. The repeat  
icon appears.  
CD  
3D Surround  
To produce a 3D surround effect that simulates  
multi-channel audio from two stereo speakers (instead  
of the five+ speakers normally required for  
2. Press REPEAT to select a desired repeat mode.  
• Track: repeats the current track  
• All: repeats all the tracks on a disc.  
• Off(No display): does not play repeatedly.  
multi-channel audio from a home theater system).  
1. Press AUDIO during playback.  
“3D SUR.” appears on the menu screen.  
Note:  
If you press SKIP (>) once during Repeat Track playback,  
2. To return to normal playback, press AUDIO  
repeatedly until “3D SUR.” disappears from the  
menu screen.  
the repeat playback cancels.  
CD  
MP3  
M/C  
WMA  
Search  
1. Press SCAN (m or M) during playback.  
2. Press SCAN (m or M) repeatedly to select the  
required speed: X2, X4, X8 backward or forward.  
3. To exit SEARCH mode, press PLAY.  
24  
 
5. Press PLAY or ENTER to start. Playback begins in  
the order in which you programmed the tracks.  
Playback stops after all of the tracks on the  
“Program” list have played once.  
Programmed Playback  
The program function enables you to store your  
favorite tracks from any disc in the player memory.  
A program can contain 30 tracks.  
6. To resume normal playback from programmed  
playback, select a track of AUDIO CD (or MUSIC)  
list and then press PLAY.  
1. Insert a disc.  
Audio CD or MP3/WMA Discs:  
AUDIO CD or MUSIC menu appears.  
2. Press PROGRAM.  
E
Repeat Programmed Tracks  
1. Press REPEAT when playing a disc. The repeat  
icon appears.  
The  
mark will appear to the right of the word  
“Program” on the right side of the menu screen.  
2. Press REPEAT to select a desired repeat mode.  
Note:  
• Track: repeats the current track  
• All: repeats all the tracks on programmed list.  
• Off(No display): does not play repeatedly.  
E
Press PROGRAM again, then the  
mark will  
disappear to exit the Program Edit mode.  
Note:  
MUSIC  
0:00:00  
AUDIO CD  
0:52:07  
1
/
12  
1
/
12  
If you press > once during Repeat Track playback,  
List  
List  
E
E
Program  
Track5  
Program  
2-Music2  
Track1  
Track2  
Track3  
Track4  
Track5  
the repeat playback cancels.  
Track7  
Track4  
Track1  
4-Music4  
1-Music1  
2-Music2  
3-Music3  
4-Music4  
5-Music5  
6-Music6  
7-Music7  
6-Music6  
1-Music1  
Track6  
Track7  
Track8  
Erasing a Track from “Program” List  
Clear All  
Clear All  
PROGRAM Edit  
DISPLAY Info  
PROGRAM Edit  
1. Use v V B to select the track that you wish to  
erase from the Program list.  
AUDIO CD Menu  
MUSIC Menu  
2. Press CLEAR. Repeat to erase additional tracks  
on the list.  
Video CD: Press PROGRAM while playback is  
stopped. The program menu appears. Press  
PROGRAM again to exit the menu.  
Erasing the Complete Program List  
1. Press B to move to the “Program” list.  
Note:  
On a Video CD with PBC, you must set PBC to Off on  
the setup menu to use the programmed playback  
(See “PBC” on page 16).  
2. Use v / V to select “Clear All”, then press ENTER.  
Note:  
The programs are also cleared when the disc is  
removed.  
VIDEO CD  
List  
Track1  
E
Program  
Track5  
Track2  
Track3  
Track4  
Track5  
Track2  
Track3  
Track1  
Clear All  
VIDEO CD Menu  
3. Select a track on the “List”, then press ENTER to  
place the selected track on the “Program” list.  
Repeat to place additional tracks on the list.  
4. Press B.  
Select the track you want to start playing on the  
“Program” list.  
25  
 
JPEG  
M/C  
Viewing a JPEG Disc  
Zoom  
Use Zoom to enlarge the photo image.  
(see page 20)  
Using this DVD Player you can view discs with JPEG  
files.  
To rotate picture  
1. Insert a disc. The PHOTO menu appears on the  
TV screen.  
Press v / V during showing a picture to rotate the  
picture clockwise or counter clockwise.  
PHOTO  
List  
Preview  
To listen to MP3/WMA music watching picture  
JPEG  
JPEG Folder 1  
JPEG Folder 2  
JPEG Folder 3  
JPEG Folder 4  
JPEG Folder 5  
JPEG Folder 6  
JPEG Folder 7  
JPEG Folder 8  
>>>  
You can display files while listering to MP3/WMA  
music files recorded on the same disc.  
1. Insert the disc containing the two types of file in  
the player.  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears. If you are in a  
file list and want to return to the previous Folder  
list, use the v / V buttons on the remote to  
2. Press TITLE to display PHOTO menu.  
3. Press v / V to select a photo file.  
4. Use B to select  
icon then press ENTER.  
highlight  
and press ENTER.  
Playback starts. The playback will continue until  
STOP is pressed.  
3. If you want to view a particular file, press  
v / V to highlight a file and press ENTER or PLAY.  
Viewing the file proceeding starts.  
Tip:  
To listen to only the desired music watching picture,  
programmed the desired tracks from the “MUSIC”  
menu and then proceed as above.  
While viewing a file, you can press STOP to move  
to the previous menu (PHOTO menu).  
Tips:  
Note:  
• Press DVD MENU to move to the next page.  
The files on a memory card are not available for this  
function.  
• There are three Slide Speed options  
(Normal) and > (Slow).  
: >>> (Fast), >>  
Use v V b B to highlight the Speed. Then, use b / B to  
select the option you want to use then press ENTER.  
JPEG disc compatibility with this player is  
limited as follows:  
• On a disc with MP3/WMA and JPEG you can switch  
MP3/WMA and JPEG. Press TITLE and MUSIC or  
PHOTO word on top of the menu is highlighted.  
• Depending upon the size and number of JPEG  
files, it could take a long time for the DVD player  
to read the disc’s contents. If you don’t see an on-  
screen display after several minutes, some of the  
files may be too large — reduce the resolution of  
the JPEG files to less than 2M pixels as 2760 x  
2048 pixels and burn another disc.  
• Press RETURN, information of file is hidden.  
JPEG  
M/C  
Slide Show  
Use v V b B to highlight the  
(Slide Show) then  
press ENTER.  
• The total number of files and folders on the disc  
should be less than 650.  
JPEG  
M/C  
Still Picture  
1. Press PAUSE/STEP during slide show.  
The player will now go into PAUSE mode.  
• Some discs may be incompatible due to a  
different recording format or the condition of disc.  
2. To return to the slide show, press PLAY or press  
PAUSE/STEP again.  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
JPEG  
M/C  
Moving to another File  
• If the files have “.jpe” or “.jpeg” extensions, please  
rename them as “.jpg” file.  
Press SKIP (. or >) or cursor (b or B) once  
while viewing a picture to advance to the next or  
previous file.  
• File names without “.jpg” extension will not be  
able to be read by this DVD Player. Even though  
the files are shown as JPEG image files in  
Windows Explorer.  
26  
 
Maintenance and Service  
Refer to the information in this chapter before  
contacting a service technician.  
Handling the Unit  
When shipping the unit  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide  
spray near the unit.  
Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution.  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
Maintaining the Unit  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or  
worn, the picture quality could be diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
For details, please contact your nearest authorized  
service center.  
27  
 
Playing a DivX Movie Disc  
DivX disc compatibility with this player is limited  
as follows:  
Using this DVD Player you can play DivX disc.  
• Available resolution size of the DivX file is under  
720x576 (W x H) pixel.  
1. Insert a disc. The MOVIE menu appears on  
the TV screen.  
• The file name of the DivX subtitle is limited to  
characters.  
MOVIE  
0:00:00  
List  
• If there is impossible code to express in the DivX  
file, it may be displayed as " _ " mark on the  
display.  
Movie Folder 1  
Movie Folder 2  
Movie Folder 3  
Movie Folder 4  
Movie Folder 5  
Movie Folder 6  
Movie Folder 7  
Movie Folder 8  
• If the number of the screen frame is over 30  
frames per second, this unit may not operate  
normally.  
2. Press v / V to select a folder, and press  
ENTER. A list of files in the folder appears. If  
you are in a file list and want to return to the  
Folder list, use the v / V buttons on the  
• If the video and audio structure of recorded  
file is not interleaved, either video or audio is  
outputted.  
If the file is recorded with GMC, the unit  
supports only 1-point of the record level.  
remote to highlight  
and press ENTER.  
GMC?  
*
3. If you want to view a particular file, press  
v / V to highlight a file and press ENTER or  
PLAY.  
GMC is the acronym for Global Motion Compensation. It  
is an encoding tool specified in MPEG4 standard. Some  
MPEG4 encoders, like DivX or Xvid, have this option.  
There are different levels of GMC encoding, usually  
called 1-point, 2-point, or 3-point GMC.  
4. Press STOP to exit.  
Tips:  
Playable DivX file  
• Press DVD MENU to move to the next page.  
z ".avi ", ".mpg ", ".mpeg "  
• On a CD with MP3/WMA, JPEG and MOVIE file, you can  
switch MUSIC, PHOTO and MOVIE menu. Press TITLE  
and MUSIC, PHOTO and MOVIE word on top of the menu  
is highlighted.  
Playable Subtitle format  
z SubRip(*.srt/*.txt)  
SAMI(*.smi)  
SubStation Alpha(*.ssa/*.txt)  
MicroDVD(*.sub/*.txt)  
SubViewer 2.0(*.sub/*.txt)  
TMPlayer(*.txt)  
Dvd Subtitle System(*.txt)  
VobSub (*.sub) b Sub/idx, stream based format.  
• The disc subtitle may not be displayed properly, if a DivX  
subtitle is downloaded through the internet.  
• If the Disc Subtitle setup menu does not have the DivX  
subtitile language you are going to play, the subtitle may  
not be displayed properly.  
Playable Codec format  
Note:  
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",  
When the bitrate of video signal on a DivX file stored  
in a memory card is over 2Mbps, it can be displayed  
like a still image.  
"MP43 ", "3IVX ".  
Playable Audio format  
z "Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA ".  
• Sampling frequency: within 8 - 48 kHz (MP3),  
within 32 - 48kHz (WMA)  
• Bit rate: within 8 - 320kbps (MP3),  
32 - 192kbps (WMA)  
28  
 
Video Mode Setting  
Additional Features  
Last Scene Memory  
With certain discs, the playback picture may be  
flickering or Dot Crawl is shown on straight lines. That  
means Vertical interpolation or De-interlace is not  
perfectly matched with the disc. In this case, the  
picture quality may be improved by changing the  
video mode.  
VCD1.1  
DVD-V  
DVD-A  
CD  
This player memorizes last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the player or switch  
off the player. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
To change the video mode, press and hold  
DISPLAY about 3 seconds during disc playback.  
The new video mode number selected is displayed  
on the TV screen. Check whether the video quality  
has improved. If not, repeat the above procedure  
until picture quality is improved.  
Note:  
This player does not memorize the scene of a disc if you  
switch off the player before commencing to play the disc.  
Video mode change sequence:  
MODE1 MODE2 MODE3 MODE1  
Screen Saver  
The screen saver appears when you leave the DVD  
player in Stop mode for about five minutes. If the  
Screen Saver is displayed for five minutes, the DVD  
Player automatically turns itself off.  
If you turn off the power, the video mode will be  
back to initial state (MODE1).  
Detailed Descriptions for Video Modes  
MODE1: The source material of the DVD video (film material  
or video material) is determined from disc information.  
MODE2: Suitable for playing film based content or video  
based material recorded by the progressive scan method.  
MODE3: Suitable for playing video based content with  
comparatively little motion.  
Note:  
The video mode setting only works when the  
Progressive Scan mode is set to “On” in the Setup  
menu.  
29  
 
Reference  
Controlling Your TV with the Supplied  
Remote  
You can control the sound level, input source, and  
power switch of your LG TV with the supplied remote.  
Code numbers of controllable TVs  
If more than one code number is listed, try entering  
them one at a time until you find the one that works  
with your TV.  
You can control your TV using the buttons below.  
Manufacturer  
ADMIRAL  
AIWA  
Code Number  
Manufacturer  
MONTGOMERY  
WARD  
Code Number  
01,06,08,09  
23,24,32,33,34  
01,08  
16,33,37,44,45  
70  
AKAI  
01  
NEC  
AMARK  
09  
NOBLEX  
07  
AOC  
01  
PACKARD BELL 43  
BELL & HOWELL  
BROKSONIC  
CANDLE  
CCE  
33  
PANASONIC  
PHILCO  
07,11,13,25,35,36  
18,19  
01,06,07,08,09,  
15,38,43,58  
06,07,43,61,62,65  
30  
51  
TV Control  
Buttons  
07  
PHILIPS  
CENTURION  
CINERAL  
CITIZEN  
08  
PIONEER  
PORTLAND  
PROSCAN  
QUASAR  
RADIO SHACK  
RCA  
43  
09  
49,50,51,52,53,54,55  
03,37,44  
11,13  
CORONADO  
CROWN  
09  
09  
16,17,23  
01,03,37,44,69  
16,17,23  
08  
CURTIS MATHES  
DAEWOO  
DAYTRON  
EMERSON  
FISHER  
01,03,08,33,35,37,44  
16,38,39,40,41,42,43  
01,08  
REALISTIC  
SAMPO  
01,09,16,17,18,19  
28,29  
SAMSUNG  
SANYO  
01,08,09,25,68  
28,29  
FUNAI  
46,47  
SCOTT  
01,08  
GENERAL ELECTRIC 03,10,11,13,37,44  
SEARS  
09,25,26,27,28,29  
64  
GRADIENTE  
HITACHI  
JC PENNEY  
JVC  
01,56,57,63,67  
09,14,15,43  
01,08,10,27,35  
20,21,63,67  
43  
SEMP  
SHARP  
09,22,23,24,60,66  
01,06,08,09,10,  
23,24,33,34  
12,62  
SIGNATURE 2000  
KIOTE  
SONY  
KMC  
09  
SOUNDESIGN  
SYLVANIA  
51  
KTV  
01,08,09,31  
01,04,05,06,07,  
08,35,51  
46,47  
By pressing  
POWER  
AV  
You can  
LG (GOLDSTAR) 01,07,08,09,35,39,40  
Turn the TV on or off.  
LODGENET  
LOGIK  
33  
SYMPHONIC  
TATUNG  
TEKNIKA  
TELERENT  
THOMSON  
YORX  
33  
11  
Switch the TV’s input source  
between the TV and other input  
sources.  
LXI  
09,24,25,26,27,28,29  
01,02,04,05,06,  
07,08,09,20,  
34,35,43,51,61,62,65  
33  
07,09,16,33,51  
09,33  
MAGNAVOX  
69  
08  
PR/CH +/–  
VOL +/–  
Note:  
Scans up or down through  
memorized channels.  
MAJESTIC  
TOSHIBA  
WARDS  
01,25,26,27,64  
01,06,08,09,10,33,34  
48  
MARANTZ  
01,32  
MEMOREX  
MGA/MITSUBISHI  
33  
XR1000  
Adjust the volume of the TV.  
01,08,32,34  
ZENITH  
01, 02,33,59  
Notes:  
Depending on the unit being connected, you may not  
be able to control your TV using some of the buttons.  
Depending on your TV, some or all buttons may  
not function on the TV, even after entering the  
correct manufacturer code.  
Controlling other TVs with the remote  
If you enter a new code number, the code number  
previously entered will be erased.  
You can control the sound level, input source, and  
power switch of non-LG TVs as well. If your TV is  
listed in the table below, set the appropriate  
manufacturer code.  
When you replace the batteries of the remote, the  
code number you have set may be reset to the  
default setting. Set the appropriate code number  
again.  
1. While holding down TV POWER button, press  
the number buttons to select the manufacturer  
code for your TV (Refer to table on the right  
column).  
2. Release TV POWER button.  
30  
 
Language Codes  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Sindhi  
Area Codes  
Choose an area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Ethiopia  
Fiji  
Code  
ET  
FJ  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Thailand  
Taiwan  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Islands  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
FI  
FR  
DE  
GB  
GR  
GL  
HM  
HK  
HU  
IN  
ID  
IL  
IT  
JM  
JP  
BE  
BT  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
NL  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
SE  
CH  
TH  
TW  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
KE  
KW  
LY  
Kuwait  
Libya  
Luxembourg  
PT  
RO  
El Salvador  
LU  
Zimbabwe  
31  
 
Troubleshooting  
Possible Cause  
Correction  
Symptom  
• The power cord is disconnected.  
• Plug the power cord into the wall outlet  
securely.  
No power.  
• No disc is inserted.  
• Insert a disc. (Check that the DVD or  
audio CD indicator in the display  
window is lit.)  
The power is on, but  
the DVD player does  
not work.  
• The TV is not set to receive DVD  
signal output.  
• Select the appropriate video input  
mode on the TV.  
No picture.  
• The video cable is not connected  
securely.  
• Connect the video cable securely.  
• Unit output setting and TV resolution  
capabilities mismatch.  
• Check TV capability.  
• Check mode of connections  
(eg. S-Video, Component etc.).  
• Check unit Resolution setting  
according to TV capability and mode of  
connection.  
• The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
• Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
No sound.  
The power of the equipment connected  
with the audio cable is turned off.  
• Turn on the equipment connected with  
the audio cable.  
• The AUDIO options are set to the  
wrong position.  
• Set the Digital Audio Output to the  
correct position, then turn on the DVD  
player again by pressing POWER.  
• Select the proper audio setting in  
AUDIO setup.  
• The Digital Audio Output mismatch  
with the amplifier.  
• Insert a playable disc. (Check the disc  
type, color system, and regional code.)  
• An unplayable disc is inserted.  
The DVD player does  
not start playback.  
• Cancel the rating function or change  
the rating level.  
• The rating level is set.  
• Point the Remote Control at the  
remote sensor of the DVD player.  
• The Remote Control is not pointed at  
the remote sensor on the DVD player.  
The Remote Control  
does not work properly.  
• Operate the Remote Control closer to  
the DVD player.  
• The Remote Control is too far from the  
DVD player.  
32  
 
Specifications  
DIGITAL OUT (COAXIAL):  
0.5 V (p-p), 75 , RCA jack x 1  
General  
Power requirements: AC 120 V , 60 Hz  
Power consumption: 10W  
DIGITAL OUT (OPTICAL):  
3 V (p-p), 75 , Optical onnector x 1  
Dimensions (Approx.):  
430 x 35 x 242 mm (W x H x D) without feet  
System  
Weight (Approx.): 2.2 kg  
Laser:  
Operating temperature:  
Semiconductor laser, wavelength 650 nm  
5 °C to 35 °C (41 °F to 95 °F)  
Signal system: NTSC  
Operating humidity: 5 % to 90 %  
Frequency response:  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Outputs  
VIDEO OUT:  
1.0 V (p-p), 75 , negative sync, RCA jack x 1  
Signal-to-noise ratio:  
> 100 dB (ANALOG OUT connectors only)  
S-VIDEO OUT:  
(Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 Ω  
Harmonic distortion: < 0.008% THD  
Dynamic range:  
> 95 dB (DVD/CD)  
COMPONENT VIDEO OUT:  
(Y) 1.0 V (p-p), 75 , negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2  
Accessories:  
Video cable (1), Audio cable (1), Remote Control (1),  
Batteries (2)  
AUDIO OUT:  
2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R) x 1  
Note: Design and specifications are subject to change prior notice.  
33  
 
LG Electronics, Inc.  
Limited Warranty - USA  
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or  
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date  
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser  
of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
LABOR: 90 days from the Date of Purchase.  
Call 1-800-243-0000 for instructions on getting the  
defective unit repaired or replaced.  
PARTS: One Year from the Date of Purchase.  
Please retain dated sales receipt and your box to  
return the unit to LG for repair or replacement.  
* Parts replaced are warranted for the remaining portion  
of the original warranty period.  
Shipping both ways will be paid by LG during the first  
90 days of the Warranty Period. During the remainder  
of the Warranty Period (91~365 days), you pay inbound  
shipping charges and LG pays return shipping charges.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED  
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG  
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE  
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT  
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE  
WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or  
consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to  
you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
Damages or operating problems that result from shipping, installation, adjustment of user controls,  
calibration, maintenance or failure to maintain, or separate system components; and  
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside  
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,  
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current  
or voltage, signal reception or input, software not licensed directly by LG, software errors that do not disable  
functionality, operating and software protocols adopted after the date of manufacture or for outside the US,  
institutional or commercial use, or other causes not arising out of defect in material or workmanship.  
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
For Warranty Service, Where to buy, Product  
Assistance, or Customer Assistance  
Call 1-800-243-0000 (24 hours a day, 365 days per year)  
and select appropriate options from the menu.  
Or visit our website at http://www.lgservice.com  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
P/N : 3834RD0055G  
Issue O  
ENGLEWOOD CLIFFS, NJ  
Printed in China  
 

KWC Indoor Furnishings 12241171000 User Manual
Learning Resources Baby Toy LER0100 User Manual
Leica Camera Lens 11626 User Manual
Life Fitness Exercise Bike exercise bikes User Manual
Lightolier Work Light FBP520L User Manual
Linear Satellite Radio DXT 21 EC User Manual
Linksys Telephone SPA922 User Manual
LOREX Technology Home Security System SG15F6584 User Manual
LST Smoke Alarm FC600 O User Manual
Marshall Amplification Stereo Amplifier MG Series User Manual