JAX
S1360
User Guide
Maintaining Safe Use of and Access to
Using Your Phone With a Hearing Aid
User Guide
3
1 Get Started
Tip: Do not press
is being activated. Pressing
while the phone
Phone Accessories
cancels the activation process.
To shop for accessories for your phone, visit
Note: If you are having any difficulty
with activation, contact Assurance
Wireless Customer Care at
1-888-321-5880 for assistance.
Program Your Phone
Before you start using your Assurance
Wireless phone, you will need to perform a
few simple steps to set it up on the
network:
1. Turn your phone on by pressing the
End/Power key (
). Your phone will
automatically attempt Hands-Free
Activation.
2. Follow the onscreen instructions to
complete the activation process. You
can also refer to the “Activation Guide”
included with your phone.
3. Once completing activation and
software update checks, the phone will
reboot.
4. In order to complete your activation, you
will need to dial 611 from your
Assurance Wireless phone or
1-888-321-5880 from any other phone.
You will need the Account PIN you
received in your Approval Letter.
Get Started
4
Charge the Battery
You must have at least a partial charge in
the battery to make or receive calls.
Phone Battery
Install the Battery
To install the battery:
1. Hold the phone face
down.
To charge the battery:
1. Connect the AC
adapter to the
microUSB jack on the
side of the phone.
2. Plug the adapter into
a wall outlet.
2. Find the notch
directly below the
back cover. It is
square. Using your
thumbnail, pry the
cover up from the
bottom to remove.
The battery icon in the
upper-right corner of the
screen tells you whether the phone is:
–
–
–
Charging (the icon is animated)
Partially charged
Fully charged
3. Place the battery in
the battery casing.
The metal contacts of
the battery must make
contact with the metal
contacts of the battery
casing.
You can safely recharge the battery at any
time, even if it has a partial charge.
Note: Before removing the battery,
make sure the phone is powered off.
4. Replace the battery
cover by sliding the
notches into the
openings on the top
of the battery casing.
5. Snap the cover into
place.
User Guide
5
Phone Overview
Get to Know Your Phone
① Earpiece.
ձ
② Display screen.
③ Volume key raises or lowers ringtone or call volume.
④ Left softkey selects items that appear on the lower
left of the display. At the home screen, you can select
MENU.
պ
ջ
ղ
ճ
⑤ Speakerphone key activates the speakerphone and
answers incoming calls.
⑥ Navigation key scrolls through lists and text entry
fields and acts as a shortcut key from the home
screen.
⑦ Talk key starts or answers a call. Press once to display
the Recent History list and twice to redial the last
number dialed. Press and hold to activate voice dialing.
⑧ Keypad for entering numbers, letters, or symbols.
⑨ * Shift key changes the text mode in text entry. Press
and hold to call your In Case of Emergency (ICE)
contacts.
մ
ռ
ս
վ
տ
յ
ն
շ
ո
չ
ր
ց
⑩ Jack for a hands-free headset (sold separately).
⑪ Jack for AC adapter (included) and microUSB cable
(sold separately).
⑫ Right softkey selects items that appear on the lower right of the display. At the home
screen, you can select CONTACTS.
⑬ OK key selects a menu item or option.
⑭ Back key erases characters in text entry and returns you to the previous screen when
navigating through menus. Press and hold to activate the keyguard.
⑮ End/Power key turns the phone on and off, ends a call or browser session, and
returns you to the home screen.
⑯ # Space key enters a space during text entry. Press and hold to call emergency number.
⑰ Microphone.
Warning: Inserting an accessory into the incorrect jack will damage the phone.
Get Started
6
Screen Icons
These icons may appear on your phone’s screen.
Your phone’s current signal strength.
(More bars = stronger signal.)
Your phone is connected to or
communicating with a Bluetooth
device via Hands-free Profile (HFP).
Your phone cannot find a usable
signal.
Your phone’s current battery charge
level. (The icon to the left shows the
battery is fully charged.)
Data service is available. When
active, the icon is animated.
The volume level is set to between 1
and 8 and vibrate is turned on.
Data service is currently dormant.
Data service is currently unavailable.
1 Beep and vibrate are set.
You have one or more missed voice
calls.
Your phone’s ringtone is turned off.
Your phone’s sound is turned off but
vibrate is turned on.
You have event notifications.
You have one or more new messages
waiting.
Your phone’s sound is turned off.
Your phone’s location feature is on
and available for location-based.
You have one or more new voicemail
messages waiting.
Your phone’s location feature is off.
Your location is available only for
911.
You have one or more new urgent
messages waiting.
You have different kinds of alerts
waiting.
Your phone is connected to a TTY
device.
You have different kinds of alerts
(including urgent messages) waiting.
An alarm or countdown is set.
Your phone’s Bluetooth feature is
enabled.
Your phone’s HAC (hearing aid
compatibility) setting is enabled.
Your phone is connected to a
Bluetooth device.
Your phone is in airplane mode.
Your phone is visible to other
Bluetooth devices.
User Guide
7
Main Menu
At the home screen, press
(OK key) to access the main menu.
Home Screen >
Level 1 >
My Stuff
Level 2
OK key
Access these options: Ringtones, Graphics, and
Ringback Tones.
Access account information and Top-Up your
My Account
Settings
account.
Access these options: Display, Volume, Ringtones,
Keyguard, Text Entry, Phone Info, Lock Phone,
Reset/Delete, and Others.
Contacts
Access your Contacts list.
Missed Alerts
Access your missed call alerts.
Access these options: Voicemail, Send Message,
Messaging
Tools
and Messages.
Access these options: Activate This Device, Alarm,
Calendar, Bluetooth, Update Phone,
Voice Services, Calculator, Countdown,
Stopwatch, World Clock, and Notepad.
History
Web
Access your recent history.
Browse the web.
Get Started
8
Back Up Within a Menu
Guide Conventions
In this guide, the following conventions are
used when describing phone features.
Press
to go to the previous menu.
Press
to return to the home
screen.
Navigate Through the Menus
Select means to press the Left softkey,
Right softkey or OK key to select an
item seen on the display. For example,
“Select MENU” tells you to physically
press the left softkey to choose MENU
from the display.
Press means to press a phone key. For
example, “Press
to make a phone
call” tells you to physically press the
Talk key on your phone.
Scroll means to use the Navigation
key to move through a list on the
display. For example, “Scroll through
your contacts list to choose a contact”
means to physically press the
Navigation key up or down to scroll
through the list on the display.
> (greater than symbol) tells you to
select an option from a menu or list.
For example, “Select MENU >Settings”
means to:
1. Press the left softkey to select MENU.
2. Scroll to the Settings option.
3. Press
(OK key) to select Settings.
User Guide
9
2 Call Features
This section describes the basic features
related to calls.
Call Using a Contact
1. From the home screen, select
CONTACTS.
Power Phone Up
2. Highlight a contact and press
.
To turn your phone on, press
and
Call Using Voice Recognition
wait until the phone display lights up.
To turn your phone off, press and hold
for two seconds until you see the
powering-down animation on the
display screen.
You can use voice recognition to call a
contact from your contact list or to dial a
phone number. For more information, see
Redial a Number
Make Phone Calls
1. Press
2. Highlight a phone number or contact
and press
Note: To redial the last number called,
to open your history.
Make sure you are in an area where a
signal can be received. Look for the signal
strength icon on the home screen. The
more bars, the stronger the signal. If there
are no bars, move to where the signal
strength is better.
.
received, or missed, press
twice.
When the phone has been idle for a time, it
changes to power save mode. Press any
key to return to normal operating mode.
There are several ways you can make a
phone call.
Answer Phone Calls
When a call comes in, the phone rings,
vibrates, or lights up. The phone number of
the caller also appears if it is not restricted.
If the number is stored in your contacts list,
the contact’s name appears. There are two
ways to answer a phone call.
Call Using a Number
1. Enter a phone number.
Answer Using Earpiece
2. Press
.
Press
Answer Using Speakerphone
Press
.
.
10
Call Features
Use the Speakerphone
Your phone has a built-in speakerphone.
End Phone Calls
Press
.
To turn on the speakerphone,
press
. The speakerphone icon
In-call Options
Selecting OPTIONS during a call displays a
list of available in-call features.
appears on the home screen when the
speakerphone is on.
To turn off the speakerphone,
press
Note: If you press
incoming call, you will answer the call.
again.
To select an option, highlight the option and
during an
press
.
Transfer Audio to switch the call to a
Bluetooth device (if applicable).
Save to save the current call’s phone
number in your Contacts.
Contact Details to display information
about the caller stored in your Contacts
(if applicable).
Silence an Incoming Call
To silence the phone without answering
the call, press or press the
Volume key up or down.
To silence the phone and answer the
call, press
Volume key up or down and then
press
or press the
Main Menu to display the phone’s main
menu.
3-Way Call to open a call with two other
parties.
.
Contacts to display your Contacts list.
Voice Memo to record the other party’s
voice.
Phone Info to display information about
your phone.
Use Speed Dialing
Speed dialing allows you to assign a one-
or two-digit shortcut to a contact. Before
you can use speed dialing you must save a
phone number as a contact and assign a
speed dial location to it. See “Assign Speed
Volume Control
To call a contact that has a speed dial
location:
Adjust Volume during a Call
Press the Volume key up or down to
adjust the earpiece volume during a
call.
1. Enter the one- or two-digit speed
dial location.
2. Press
.
User Guide
11
3. Select Contacts, Recent History, or
Enter Phone#.
Use Plus (+) Code Dialing
When placing international calls, use Plus
Code Dialing to automatically enter the
international access code for your location
(for example, 011 for international calls
made from the U.S.).
4. Select a number from your Contacts or
Recent History, or enter a number
directly, and then press
.
5. When you’re connected to the second
party, press
3-way call.
again to begin your
1. Press and hold
to display "+" on
your phone screen.
2. Enter the country code and phone
number, and then press . (The
Note: When using this feature, the
normal airtime rates will be charged for
each of the two calls.
phone automatically prepends the access
code for international dialing, followed by
the country code and phone number.)
Emergency Services
Call Emergency Service
Missed Call Notification
When an incoming call is not answered,
your screen displays the Missed Call log.
You can call an emergency number even if
your phone is locked or your account is
restricted. When you call, your phone enters
emergency mode. This enables the
Press
to dial the phone number.
emergency service exclusive access to your
phone to call you back, if necessary. To
make or receive regular calls after dialing
the number, you must exit this mode.
To display a Missed Alerts entry from the
home screen:
1. Select Missed Alerts from the main
menu.
To dial an emergency number:
2. Highlight the entry you wish to view
and press
.
Press and hold
and select OK.
– or –
3-Way Calling
Press
.
With 3-Way Calling, you can talk to two
people at the same time.
Exit Emergency Services
When you have completed the emergency
call:
1. Enter a number and press
.
2. Once you have established the
Press
and then press
.
connection, press
. (This puts
the first caller on hold.)
Call Features
12
3 Text Entry
Enter Numbers with Number
Keypad
From the text entry field, select OPTIONS
> Text Mode > 123 to enter a number
when you press a key once. The 123 icon
indicates you are in numeric input mode.
Text Entry Modes
You can enter letters, numbers, and
symbols whenever you are prompted to
enter text.
1. From a screen where you can enter
text, select OPTIONS to change the text
mode. (If you are in the message entry
screen, select OPTIONS >
Enter Letters with Number
Keypad
From the text entry field, select OPTIONS
> Text Mode > Abc to enter letters. You
can enter text in the following ways:
Text Mode.)
2. Select one of the following options:
–
Abc to enter characters by using the
alphabet mode.
–
T9Word to enter text using a
predictive text system that reduces
the number of key presses required
while entering a word.
123 to enter numeric characters.
Symbols to enter symbols.
Smileys to enter smile icons.
Emoticons to enter “emoticons” (if
applicable).
Paste List to paste copied or cut
text (if applicable).
Web Shortcuts to enter Web
or .com).
To enter a letter, press a key once for
the first letter, twice of the second letter,
and so on. If your phone is set to
Spanish, accented letters are available.
Wait for the cursor to move right and
–
–
–
–
enter the next character. Press
enter a space.
to
To change case mode, press
.
To enter a number, press and hold a
number key until the number appears
on the screen.
–
–
Tip: The Abc/ABC/abc icon on the
bottom right corner of the screen
indicates you are in Abc input mode.
–
Text Options to display the text
entry options menu (if applicable).
User Guide
13
Rapid Entry (T9) with Number
Keypad
From the text entry field, select OPTIONS
> Text Mode > T9Word to check words
you are trying to spell against a dictionary
of common words. You can enter text in the
following ways:
To enter words, press a key once. For
example, to enter the word “any” press
the 2 > 6 > 9 keys. If the word doesn’t
match what you want, scroll up or down
to look at other word matches. When
you see the word you want, press
.
To change case mode, press
.
To enter a number, press and hold a
number key until the number appears
on the screen.
Tip: The T9Word/T9WORD/T9word
icon on the bottom right corner of the
screen indicates you are in T9 input
mode.
Enter Symbols with Number
Keypad
While entering text in Abc mode, you can
enter symbols by pressing
see the symbol you want.
until you
To access the full set of symbols:
1. From the text entry field, select
OPTIONS > Text Mode > Symbols.
2. Scroll up or down to view the list of
symbols.
3. Highlight your desired symbol and press
to enter it.
14
Text Entry
Text Entry Quick Reference
This table gives instructions for entering text.
To..
Do this..
Use Abc or T9Word mode and press a key
Enter a letter
Enter a number
Enter a symbol
until you see the letter you want.
Use 123 mode and press a key.
Use Symbols mode and highlight a symbol
you want and press
.
Use Smileys mode and highlight a smiley you
want and press
Enter a smiley
.
Use Emoticons mode and highlight an
emoticon you want and press
Enter an emoticon
Enter a web shortcut
.
Use Web Shortcut mode and highlight a word
you want and press
.
Enter a space
Press
Press
.
Erase a character
.
Erase all characters
Move the cursor right or left
Move the cursor up or down
Change case mode
Press and hold
.
Scroll left or right.
Scroll up or down.
Press
.
In Abc or T9Word mode, press
. Choose
. Choose
. Choose
Capitalize any letter
Lowercase any letter
Initial caps
uppercase (ABC or T9WORD).
In Abc or T9Word mode, press
lowercase (abc or T9word).
In Abc or T9Word mode, press
sentence case (Abc or T9Word).
Select options on the bottom of the
screen
Press the appropriate left or right softkey.
User Guide
15
4 My Stuff
This section describes how your phone can retrieve and playback media files and other
downloads.
My Stuff Menu
Select My Stuff from the main menu to access the following functions:
Level 1 >
My Stuff
Level 2 >
Level 3
Ringtones
Graphics
Displays your ringtones and the Get New option.
Displays your graphics.
Ringback Tones
Launch application to purchase Ringback Tone.
Assign a Ringtone
1. From Ringtones, select a ringtone.
2. Select Assign and choose how you
want to assign the ringtone.
Ringtones
Ringtones stores your downloaded
ringtones.
You can download ringtones to your phone
from the Assurance Wireless Website at
www.assurancewireless.com. or directly
from your phone. Charges apply.
Ringback Tones
Select Ringback Tones to purchase
ringback tones for your account. For more
information about your account, go to
Download a Ringtone
Before downloading, make sure you have
enough money in your cash balance;
otherwise you can Top-Up your account.
1. From Ringtones, select Get New and
search for a ringtone.
2. Follow the prompts to purchase and
download the selected ringtone.
My Stuff
16
5 My Account
You can manage your Assurance Wireless
account directly from your phone. The
basic tasks are summarized in this chapter.
For more information about your account,
Top-Up your Account
Top-Up is how you add money to your
Assurance Wireless account. You can
Top-Up your Assurance Wireless account
right from your phone. First, buy a Top-Up
card from one of the thousands of retailers
that carry them or register your debit card,
credit card, or PayPal account at
Check your Account
Balance
You can check your Assurance Wireless
account status by selecting My Account >
Balance + Usage from the main menu.
Your account information appears. When
your account is low or empty, you receive a
notification to Top-Up.
Note: You cannot register a debit or
credit card from your phone, and must
register online first before you can
Top-Up with this method via the phone.
When your balance is low, you can
Top-Up your Assurance Wireless
account from your phone.
Note: Additional charges may apply for
multiple balance checks in one day.
more details.
Top-Up with a Top-Up Card
1. From the main menu, select
My Account.
2. Highlight Top-Up link and press
3. Enter your Account PIN and select
DONE.
.
4. Scroll down to select Login and
press
5. Enter your Top-Up card’s PIN number
and press
6. Scroll down to select Top-Up Now and
press
.
.
.
7. You are now Topped-Up. Press
to
exit.
User Guide
17
Top-Up with a Debit Card,
Credit Card, or PayPal
Account
1. From the main menu, select
My Account.
2. Highlight Top-Up link and press
3. Enter your Account PIN and select
DONE.
.
4. Scroll down to select Login and
press
.
5. Scroll down to select either
Credit Card or PayPal and press
.
6. Enter the amount you want to Top-Up
and press . (A minimum Top-Up of
$10 may be required.)
7. Scroll down to select Top-Up Now and
press
.
8. You are now Topped-Up. Press
to
exit.
Note: You can also Top-Up over the
For More Information
For more information about your
Assurance Wireless account or Assurance
Wireless service, visit
My Account
18
6 Settings
Settings Menu
Select Settings from the main menu to access the following functions:
Level 1 >
Settings
Level 2 >
Display
Level 3
Access these options: Graphic, Brightness,
Backlight, Notification, Picture ID, Power Save
Mode, Keypad Light, Clock/Calendar, and
Greeting.
Access these options: Incoming Ringtone,
Playback Volume, Power Up/Down, Key Beeps,
and Escalate Setting.
Volume
Access these options: Incoming Calls, Voicemail,
Ringtones
Keyguard
Messages, Calendar, and Power Up/Down.
Access these options: On or Off.
Access these options: Word Complete,
Next Word Complete, Phrase Complete,
Word Scan, Word Choice List, Input Language,
My Words, and Help.
Text Entry
Access these options: My Phone#, Memory Status,
Icon Glossary, Version, Advanced, My Account,
and UL Environment Certification.
Phone Info
Lock Phone
Reset/Delete
Access these options: Lock Now,
Change Lock Code, and Lock Code Hint.
Access these options: Reset Settings,
Reset Phone, Delete Stuff, and Change Lock
Code.
Access these options: Accessibility, Airplane Mode,
Alerts, Call Setup, Data Settings, Headset Mode,
Language, Location, and Navigation Keys.
Others
User Guide
19
Backlight
You can adjust Backlight to maximize
brightness or maximize battery life.
Display
Adjusting your phone’s display settings not
only helps you see what you want, they can
also help increase battery life.
Set Backlight Dim Duration
1. From Backlight, select Backlight Dim.
2. Select Always Bright, Always Dim, or
a preset length of time to elapse before
the screen backlight dims.
Set Graphics
From Graphic, select a graphic on the
home screen.
Set Backlight Off Duration
Set Main Menu View
From the home screen, select MENU.
Select one of the following:
1. From Backlight, select Backlight Off.
2. Select a preset length of time to elapse
before the screen and keypad
GRID VIEW displays icons of each
menu item, with its name at the bottom
of the screen.
backlights turn off.
Set the Notification Pop-up
LIST VIEW displays a list of all menu
items.
This option allows you to enable or disable
notification pop-up when you receive a new
notification (except for incoming call and
alarm) while an application is running.
Set Brightness
1. From Brightness, scroll to change the
brightness level.
2. Select a brightness level.
From Notification, select
Enable Pop-up or Disable Pop-up.
Set a Picture ID
You can select Picture IDs for your
contacts, unsaved numbers, private or
unknown numbers.
1. From Picture ID, select Contact,
Unsaved Numbers, or
Private / Unknown. (If you select
Contact, select an entry.)
2. Scroll up or down to select a picture ID
option and select an image to assign.
Settings
20
–
–
If you select Power Up/Down,
select On or Off.
If you select Key Beeps, select
Tone Volume or Tone Type.
Set Power Save Mode
This feature helps conserve your battery
power by automatically adjusting the
backlight and keypad setting of your
phone.
1. From Power Save Mode, select On.
2. Read the message and select
CONTINUE.
2. Scroll up or down to select a volume
level.
Tip: You can adjust the ringtone volume
from the home screen (or the earpiece
volume during a call) by using the
volume key.
Set Keypad Light
From Keypad Light, select On.
Set Escalate Setting
1. From Volume, select Escalate Setting
> Escalate.
2. Select On or Off.
Set the Clock/Calendar
From Clock/Calendar, select a
clock/calendar display option.
–
If you select On, select Time Interval
to select a volume increase time
interval.
Set a Custom Greeting
You can display your own custom greeting
on the home screen.
1. From Greeting, select Custom.
2. Enter a custom greeting.
Warning: Turning off escalating ringer
will make your phone ring loudly.
Unexpected loud sounds could damage
your hearing.
3. Select DONE to save your greeting.
Ringtones
You can assign a ringtone or vibration
pattern to incoming calls, messages, etc.
and also enable audio guidance.
Volume
Adjust your phone’s volume settings to suit
your needs and your environment.
Select Ringtones for Incoming
Calls and Messages
1. From Ringtones, select
Incoming Calls or Messages.
2. Select Contacts, Unsaved Numbers, or
Private / Unknown.
Adjust Volume
1. From Volume, select Incoming
Ringtone, Playback Volume, Power
Up/Down, or Key Beeps.
User Guide
21
–
If you select Contacts, select
All Contacts, or select
Text Entry
One Contact to select an entry.
3. Scroll up or down to select a ringtone
You can configure settings for text entry.
From Text Entry, select one of the
following:
option and select a ringtone.
Word Complete to suggest possible
words based on letters you have
entered.
Next Word Complete to automatically
display the word that may follow the
current text input.
Phrase Complete to set the phone to
predict possible phrases after one word
with a space is entered.
Word Scan to allow the predictive text
input system to recognize words by
searching Contacts.
Select Ringtones for Voicemail,
Calendar, and Power Up/Down
1. From Ringtones, select Voicemail,
Calendar, or Power Up/Down.
2. Select Downloaded, Preloaded
Ringtones, or No Ringtone.
3. Scroll up or down to select a ringtone
option and select a ringtone.
Keyguard
Use Keyguard to lock the keypad
immediately or to automatically lock the
keypad after a period of inactivity to
prevent accidental key presses.
Word Choice List to select whether to
display the word choice list.
Input Language to select the language
to enter (English or Spanish).
My Words to edit or delete custom
words you have added to the predictive
text database.
Enable Keyguard
From Keyguard, select On.
Select Text to select text for copying,
cutting or adding (if applicable).
Delete All to delete all text (if
applicable).
– or –
From the home screen, press and hold
.
Help to view the T9 instructions.
Unlock Keyguard
From the home screen, press
and
then press to unlock the keypad.
Settings
22
Phone Info
Lock Phone
The Lock Phone settings menus let you
set phone security, lock code, and more.
View Phone Number
Select My Phone# to view your phone’s
phone number, MSID, and other
information.
Set Lock Phone
When your phone is locked, you can only
make calls to 911 or ICE Contact.
1. From Lock Phone, enter your four- digit
lock code.
Check your Phone Memory
Select Memory Status to check the
memory usage of your phone.
2. Select Lock Now.
View Phone Icons
Select Icon Glossary to view the icons
used in your phone.
Unlock the Phone
1. From the home screen, select
UNLOCK.
2. Enter your four-digit lock code.
View Version Information
Select Version to check your phone’s
software and hardware information.
Change Lock Code
View Advanced Information
Select Advanced to view your phone’s
1. From Lock Phone, enter your four- digit
advanced information.
lock code.
2. Select Change Lock Code.
3. Enter a new four-digit code.
4. Re-enter your new lock code. (You will
be prompted to create a lock code hint
to help you remember your new lock
code.)
My Account
Select My Account to manage your
account.
UL Environment Certification
Select UL Environment Certification
to display the UL Environment
Certification mark.
5. Select YES to create a lock code hint or
NO to return to the previous menu.
User Guide
23
Reset Your Phone and Phone
Content
This option lets you clear different types of
personal information stored on your phone,
reset your phone to factory settings, or
both.
Reset/Delete
Delete Phone Content
You can quickly and easily delete all the
content that you have created or stored in
your phone.
1. From Reset/Delete, enter your four-
digit lock code.
1. From Reset/Delete, enter your four-
digit lock code.
2. Select one of the following:
2. Select Delete Stuff.
–
Reset Settings to restore all the
factory defaults, including ringtone
types and display settings. Contacts,
History, Calendar, and Messaging
are not affected.
Reset Phone to reset all settings
and erase all data on your phone.
3. Select one of the following:
–
–
Messages to delete all messages.
Call Logs to delete all call histories
from the phone.
–
Browser Cookies and Cache to
delete all Web cookies and all Web
cache memory saved in the phone.
Downloaded Content to delete all
data downloaded to your phone.
Contacts to delete all of your
Contacts including speed dial
numbers saved in your Contacts.
Voice Memo to delete all voice data
and call memos saved in the phone.
All Stuff to delete all user-added
data.
–
3. Read the message and select
–
–
RESET SETTINGS or RESET PHONE.
Others Settings
You can customize additional settings on your
phone such as accessibility, airplane mode,
alerts settings, call setup options, data
settings, headset mode, display language,
location mode, and navigation key shortcut.
–
–
4. Read the message and select DELETE.
Accessibility Settings
The Accessibility menu lets you enable
and manage accessibility-related features.
Settings
24
–
Never Confirm to never ask for
confirmation.
Voice Guide
Voice Guide allows you to hear voice
prompts and spoken numbers or key
names as you press a key, and also to hear
menus and options, Contacts names, email
addresses, URLs, etc., as you select each
item onscreen. (The default setting is Off.)
To adapt the system to your voice:
1. From Voice Recognition, select
Adaptation > Adapt Voice.
2. Select START and repeat each word,
phrase, or telephone number you hear.
To enable Voice Guide:
1. From Accessibility, select
Voice Services > Voice Guide >
Speech Output.
To reset the adaptation:
1. From Voice Recognition, select
Adaptation.
2. Select Reset Voice > YES.
2. Select On or Off.
To change the audio mode:
1. From Voice Recognition, select
Audio Modes.
To adjust the Speech Rate:
1. From Accessibility, select Voice
Services > Voice Guide > Speech Rate.
2. Select Slow, Normal, or Fast.
2. Select one of the following:
–
–
Expert Mode to sound a beep only.
Prompt Mode to prompt for required
information.
Voice Recognition Settings
You can control the settings associated with
voice recognition. See “Voice Recognition”
on page 46 for more information.
–
Readout Mode to prompt for
required information and to read the
text displayed on the main screen.
From Accessibility, select Voice
Services > Voice Recognition to display
the voice recognition settings menu.
To change the dialing region:
1. From Voice Recognition, select
Dialing Region.
To change the voice recognition confirmation: 2. Select one of the following:
1. From Voice Recognition, select
Confirmation.
2. Select one of the following:
–
North America to recognize only
numbers valid in North America.
Other to recognize any number
regardless of location.
–
–
Automatic to ask for confirmation
only when the system is not sure
what you said.
To display the software version:
From Voice Recognition, select
About.
–
Always Confirm to always ask for
confirmation.
User Guide
25
Connect to TTY Device
Screen Contrast
You can connect the phone to a teletype
(TTY) device for the hearing impaired.
(TTY device sold separately.)
You can make your screen easier to read
with a high contrast color scheme.
1. From Accessibility, select Screen
Contrast.
2. Select Standard Color or High
Contrast BW.
Note: Enable TTY only when using the
phone with a TTY device.
1. Connect the TTY device to your phone.
2. From Accessibility, select TTY.
3. Select OK to clear the notification.
4. Select one of the following:
Connect to Hearing Aid
Device
With a hearing aid device (sold separately)
connected, you can enable the hearing aid
feature.
1. Connect the hearing aid device to your
phone.
2. From Accessibility, select Hearing Aid.
3. Select OK to clear the notification.
4. Select On.
–
–
TTY Off to disable TTY.
TTY VCO to enable TTY mode in
Voice Carry Over mode.
–
–
TTY HCO to enable TTY mode in
Hearing Carry Over mode.
TTY Full to enable all TTY settings.
Vibrate Type
You can select vibration patterns for
incoming calls, messages, alarms, and
scheduled events.
1. From Accessibility, select
Vibrate Type.
2. Select Incoming Calls, Voicemail,
Messages, or Alarm/Calendar.
3. Select a vibration pattern.
Airplane Mode
Airplane Mode allows you to use many of
your phone’s features, such as games and
voice memos, when you are on an airplane
or in any other area where making or
receiving calls or data is prohibited. When
you set your phone to Airplane Mode, it
cannot send or receive any calls or access
online information.
1. From Airplane Mode, select OK to
clear the notification.
2. Select one of the following:
–
On to activate Airplane Mode.
Airplane Mode will be deactivated
when you turn the phone off.
Settings
26
–
–
Off to deactivate Airplane Mode.
On Power-up to activate Airplane
Mode each time you turn the phone on.
Call Setup Options
You can configure various call-related
settings.
Tip: While in Airplane Mode, your
phone’s screen will display the airplane
mode icon
Abbreviated Dialing
Abbreviated Dialing is similar to speed
dialing. You can use either of the following
abbreviated dialing features:
.
Alerts
You can change the alert settings
according to your needs.
Contacts Match - Retrieve any number
saved in your Contacts by entering four
or more digits of any part of the number.
Prepend - Prepend the first five or six
digits (for example, the area code and
prefix) to any four or five digits you enter.
Alerts Notification
Set your phone to alert you with an audible
tone when you change service areas, once
a minute during a voice call, or when a call
has been connected.
1. From Alerts, select Beep Each Minute,
Out of Service, or Connect.
To activate the Prepend feature:
1. From Call Setup, select Abbrev. Dial.
2. Select Prepend > On.
3. Enter a five- or six-digit number and
select OK.
2. Select On or Off.
To place a call using Abbreviated Dialing:
1. Enter the four or more digits of any part of
a Contacts entry’s phone number to use
the Contacts Match feature.
Voicemail or Message Alerts
You can set how often your phone alerts
you when there is a new voicemail or
message notification.
1. From Alerts, select Repeated Tone >
Voicemail or Messages.
2. Select Single Tone (once only) or
Repeated Tone (once every minute).
– or –
Enter the last four or five digits of the
number to use the Prepend feature.
2. Press
number.
to call the displayed
Persistent Alerts
You can set the type of Alert you would like
to receive.
1. From Alerts, select Persistent Alerts.
2. Select Audible Tone or Vibrate.
3. Select On or Off.
Call Answer Mode
You can select how to answer incoming
calls on your phone.
1. From Call Setup, select Call Answer.
2. Select Talk Key or Any Key.
User Guide
27
2. Select On or Off.
Auto-Answer Mode
Set your phone to automatically pick up
incoming calls. Remember, your phone will
answer calls in auto-answer mode even if
you are not present.
1. From Call Setup, select Auto-Answer.
2. Select one of the following:
Note: When enabled, Net Guard
appears only once as long as you have
not turned the phone off and on.
Update Data Profile
If you choose to change your user name
and select a new one online, or make any
changes to your services, you must then
update the profile on your phone.
–
Hands-free to answer calls
automatically when the phone is
connected to an optional headset or
hands-free device.
From Data Settings, select
Update Data Profile. (To cancel, press
before completing the update.)
–
Speakerphone to answer calls
automatically in speakerphone
mode.
Headset Mode
3. Select the time you would like your
You can set the sound output destination of
incoming ringtone on your phone. From
Headset Mode, select one of the following:
phone to wait before answering.
Data Settings
Although your phone’s data services are
turned off by default, you may enable them
at any time.
Normal to play the ringtone for
incoming calls through both the headset
and the speaker.
Headset Only to play the ringtone for
incoming calls only through the headset.
To enable data services:
1. From Data Settings, select Data > On.
2. Read the message and select YES.
Display Language
You can choose to display your phone’s
To disable data services:
1. From Data Settings, select Data > Off.
2. Read the disclaimer and select
DISABLE.
onscreen menus in English or in Spanish.
To assign a language for the phone’s
display:
1. From Others, select Language.
2. Select English or Español.
Net Guard
The Net Guard helps you avoid accidental
connections when you connect to the Web.
To enable or disable Net Guard:
1. From Data Settings, select Net Guard.
Settings
28
Location
Navigation Key Shortcut
Before using any of the location-based
services, you must turn on your phone’s
location feature.
You can use the navigation keys as
shortcuts to access specific menu items
directly from the home screen. You can
reassign the default shortcuts to the menu
items you choose.
1. From Navigation Keys, select the
navigation key you wish to reassign.
2. Scroll up or down to highlight a function.
3. Select ASSIGN to save. (For options with
submenu levels, such as Settings, you
can assign submenu options by
To enable your phone’s location feature:
1. From Location, select On/Off.
2. Select OK to clear the notification.
3. Select On.
Tip: When the Location feature is on,
your phone’s home screen will display
the
icon. When Location is turned
off, your phone will display the
icon.
navigating to the desired option.)
To send the GPS log to other devices:
1. From Location, select NMEA Output.
2. Select USB.
Note: Turning Location on will allow the
network to detect your position using
GPS technology, making some
applications and services easier to use.
Turning Location off will disable the
GPS location function for all purposes
except 911, but will not hide your
general location based on the cell site
serving your call. No application or
service may use your location without
your request or permission.
GPS-enhanced 911 is not available in
all areas.
User Guide
29
7 Contacts
Use Contacts to store information about a person or company.
Access Contacts
Add Contacts
Access Contacts List
1. From the home screen, select
Add Contacts from Home
Screen
CONTACTS.
1. From the home screen, enter a phone
number to save.
– or –
2. Select OPTIONS > Save.
3. Select New Entry or Existing Entry.
4. If you chose New Entry, select a
number type, and then enter the new
entry name.
Select Contacts from the main menu.
2. Enter the first letter of your desired
contact and scroll to highlight it.
3. Do one of the following:
–
–
Press
Press
details.
to call the contact.
to view the contact’s
– or –
If you chose Existing Entry, select an
entry to which you want to save the
number, and then highlight a number
–
–
Select Add New… to create a new
contact.
Select OPTIONS to access more
functions.
type and press
.
5. When done, select DONE.
View Contact Details
1. From the home screen, select
CONTACTS.
2. Select a contact to show the details.
Contacts
30
Add Contacts from Contacts
Menu
Use Contacts
Call Contacts
1. From the Contacts list, highlight a
1. From the Contacts list, select
Add New... > New Contact.
2. Enter a name for the contact. Scroll
down to the next field when done.
3. Enter a primary number for the contact
and select a number type for the entry.
4. Enter additional phone numbers, email
addresses, and other contact details.
(Scroll up or down to move through the
contact fields.)
contact.
2. Press
to dial the entry’s default
phone number.
– or –
To dial another number from the same
entry, select an entry to display the
contact details screen, highlight a
number and then press
.
5. When done, select DONE.
Send a Text Message to
Contacts
1. From the Contacts list, select a contact.
2. At the contact details screen, highlight a
number or email address.
3. Select SEND MESSAGE.
4. Complete your text message and select
SEND.
Add a Code or Extension
When saving the phone number of an
automated service, you may include a
pause for dialing an extension.
1. From the home screen, enter a phone
number.
2. Select OPTIONS and a type of pause:
–
Hard Pause causes the phone to
wait until you select SEND TONES
while making the call.
Send a Contact
–
2-Sec. Pause causes the phone to
stop dialing for two seconds.
1. From the Contacts list, select a contact.
2. Select OPTIONS > Send Contact to
send to a Bluetooth-enabled device.
3. Complete the appropriate task to send
the contact information.
3. Enter the remaining numbers and select
OPTIONS > Save.
4. Complete the contact information and
select DONE.
User Guide
31
Assign Pictures to Contacts
1. From the Contacts list, select a contact.
2. At the contact details screen, scroll up
Customize Contacts
Edit Contact Details
1. From the Contacts list, highlight a
to select
.
3. Select Choose Photo.
4. Select a picture from the list. (Scroll to
select a picture.)
contact.
2. Select OPTIONS > Edit Contact.
3. Enter additional phone numbers, email
addresses, and other contact details.
(Scroll up or down to move through the
contact fields.)
Add a Prefix to Phone
Numbers
Use Prepend to add a prefix, such as an
area code, to a phone number:
1. From the Contacts list, select a contact.
2. At the contact details screen, highlight a
number.
4. When done, select DONE.
Assign Number Types
1. From the Contacts list, select a contact.
2. At the contact details screen, select
OPTIONS > Edit.
3. Highlight the number and select
OPTIONS > Set # Type.
3. Select OPTIONS > Prepend to enter
the prefix at the beginning of the
number.
4. Select a number type. The appropriate
icon appears next to the number in your
contacts list.
Assign Speed Dials to
Contacts
1. From the Contacts list, select a contact.
2. At the contact details screen, highlight a
number.
3. Select OPTIONS > Set Speed Dial.
4. Select a location from the list to assign
the speed dial number.
5. Select DONE.
Assign Ringtones to Contacts
1. From the Contacts list, select a contact.
2. At the contact details screen, select
Set Ringtones.
3. Select Incoming Calls or Message >
Change.
4. Select a ringtone from the list. (Scroll to
select a ringtone.)
Contacts
32
5. When finished, select SAVE.
Delete Contacts
1. From the Contacts list, select a contact.
2. Select OPTIONS > Delete Contact >
DELETE.
Delete a Group
1. From the Contacts list, highlight a
group.
Note: You cannot recover deleted
information.
2. Select OPTIONS > Delete Group >
DELETE.
Contact Groups
You can assign your contacts to groups.
Speed Dial List
Assign Speed Dial Numbers
1. From the Contacts list, select OPTIONS
Create a New Group
1. From the Contacts list, select
Add New... > New Group.
2. Read the message and select START.
3. Select contacts from the list provided. A
checkmark appears next to each
selection. (You can also remove
checkmarks.)
4. When finished, select CONTINUE.
5. Enter a name for the group and select
SAVE.
> Settings > Speed Numbers.
2. Highlight an unassigned number
(marked as empty) and select ASSIGN.
3. At the contacts list, select a contact.
Clear Speed Dial Numbers
1. From the Contacts list, select OPTIONS
> Settings > Speed Numbers.
2. Highlight an assigned number and
select OPTIONS > Remove.
Remove Contacts from
Groups
1. From the Contacts list, highlight a
group.
2. Select OPTIONS > Edit Group.
3. Highlight a member and select
OPTIONS > Remove from Group >
YES.
Dial Services
Your Contacts list is preprogrammed with
contact numbers for various services.
1. From the Contacts list, select OPTIONS
> Settings > Services.
2. Select a service and press
.
4. Repeat step 3 to remove additional
members.
User Guide
33
Emergency Message
To send an emergency message:
1. From the Contacts list, select OPTIONS
> Settings > ICE.
ICE Contacts
Your phone is equipped with a key that
displays the ICE (In Case of Emergency)
contacts, which could be very helpful in
case of emergency.
2. Select SEND TEXT > OK.
Note: When Location settings is turned
off, it will be automatically turned on.
Add an ICE Contact
1. From the Contacts list, select OPTIONS
> Settings > ICE > ICE Contacts.
2. Highlight Add to ICE Contacts under
“Call” or “Text” field and select ASSIGN.
3. Select the entry to register as ICE
contact.
To enter or edit the emergency message:
1. From the Contacts list, select OPTIONS
> Settings > ICE.
2. Select Emergency Message > EDIT.
3. Enter or edit the message and select
DONE.
Call an ICE Contact
1. From the home screen, press and hold
ICE Information
1. From the Contacts list, select OPTIONS
> Settings > ICE.
2. Select My Information > EDIT.
3. Enter or edit the necessary information
and select DONE.
.
2. Read the message and select OK.
Replace or Remove an ICE
Contact
1. From the Contacts list, select OPTIONS
> Settings > ICE > ICE Contacts.
2. Highlight an entry and select OPTIONS.
3. Select Replace to select another
contact. Select a new contact from the
displayed list.
– or –
Select Remove > YES to remove the
selected contact.
Contacts
34
8 Messaging
Use Messaging to send, receive, and erase messages from your phone.
Messaging Menu
Select Messaging from the main menu to access the following functions:
Level 1 >
Level 2 >
Voicemail
Level 3
Messaging
Access these options: Call Voicemail and
Voicemail Details.
Send Message
Messages
Compose a text message.
Shows a list of threads.
Check your Voicemail
When you receive a voicemail message, a
notification with a voicemail message icon
appears at the top of your screen.
1. At the voicemail notification, press
2. Enter your voicemail password if
prompted.
Use Voicemail
Set Up your Voicemail
You should set up your Voicemail and
personal greeting as soon as your phone is
activated. Always use a password to
protect against unauthorized access.
.
3. Follow the voice prompts to listen to and
1. Press and hold
.
manage your voicemail messages.
2. Follow the voice prompts to create your
password and record your name and
greeting.
Retrieve Your Voicemail
Messages
You can review your messages directly
from your wireless phone or from any other
touch-tone phone.
Note: It is strongly recommended that
you set a voicemail password. Without
a password, anyone who has access to
your phone can access your messages.
From your wireless phone:
Press and hold
.
User Guide
35
To use the phone's menu, select
Messaging > Voicemail >
Call Voicemail.
–
NEW ADDRESS to enter a
recipient's phone number or email
address directly. Select CONTINUE
to proceed.
From any other phone:
3. Enter the message. (Select OPTIONS
to access more features.)
4. When done, select SEND.
1. Dial your wireless phone number.
2. When your voicemail answers, press
the asterisk key (*).
3. Enter your password.
Access Messages
Read and reply to the messages you have
received.
Check Voicemail Details
You can review your voicemail messages
on your wireless phone.
To read a message:
When you receive a message, your
phone will display a notification
message. Use your navigation key or
select View.
From Messaging, select
Voicemail > Voicemail Details.
Send Messages
You can send and receive text messages
with most mobile phones and email
addresses.
To reply to a message:
1. While the message is displayed, select
REPLY.
2. Compose a reply.
3. When done, select SEND.
Create a Text Message
1. From Messaging, select
Send Message.
2. Select a recipient from the list or from
the following options:
Note: The Kyocera JAX is not capable
of receiving picture and video
messages.
Threaded Messaging
Threaded messaging lets you follow a
chain of messages to and from a particular
contact.
–
Go to Contacts to select a recipient
from your Contacts. (Qualifying
Contacts entries must contain a
phone number or an email address.)
MULTIPLE to select multiple
recipients. Select CONTINUE when
you have finished selecting and
entering recipients.
–
To display the thread list:
From Messaging, select Messages.
Messaging
36
Call to dial the phone number
appearing in the selected message.
Launch to open the URL appearing in
the selected message.
Save Number to save the phone
number appearing in the selected
message.
Save Email to save the email address
appearing in the selected message.
Manage Text Blocking to block text
messages from specific phone numbers
or email addresses.
Block This Sender to block text
messages from the phone number or
email address of the selected
message's sender.
Settings to display the Messaging
Settings menu.
Combine/Uncombine to display
segmented messages as one message
or vice versa.
More Information to display more
information when receiving an
Emergency Alert message. See
View Messages
Select a thread to display the messages
sent to and received from a particular
contact, in reverse chronological order.
Failed, pending, and draft messages are
also listed.
Me - Message you sent.
Me (Failed) - Message you did not send
successfully.
Me (Pending) - Message you have not
sent yet because your phone has no
network connection. The message will
be sent automatically when your phone
reconnects to the network.
Me (Draft) - Message you saved as a
draft. Only one draft can be saved in
each thread, and that draft appears at
the top of the thread.
Threaded Messaging Options
When you are viewing a messaging thread
list, select OPTIONS. You can choose from
the following options. (Options will vary
according to screen.)
Forward to forward the selected
message.
Message Settings
Messaging settings allow you to set how
the phone handles incoming and outgoing
messages.
Lock to lock the selected message.
Unlock to unlock the selected
message.
Unlock All to unlock all messages.
Note: Messages are automatically
deleted starting with the oldest. To save
messages, lock them.
Clear Alerts Icon
Clear Alerts Icon will clear the envelope
icon on the display.
Delete to delete the selected message.
User Guide
37
1. From Messaging, select OPTIONS >
Clear Alerts Icon.
2. Select YES.
Edit Preset Messages
Your phone comes with preset messages,
such as “Give me a call” which you can
insert into the body of a text message.
1. From Messaging, select OPTIONS >
Preset Messages. (The list of preset
messages will be displayed.)
Message Alerts
You can set how often your phone alerts
you when there is a new message
notification.
1. From Messaging, select OPTIONS >
Repeated Tone > Messages.
2. Select Single Tone (once only) or
Repeated Tone (once every minute).
2. Select OPTIONS and do one of the
following:
–
Select Send Message to insert a
preset message to your text
message.
–
–
Select Edit to edit the text.
Select Delete to delete the preset
message.
Select Reset all messages to reset
all messages.
Callback Number
With this feature, you can specify the
callback number your recipients see when
you send messages.
1. From Messaging, select OPTIONS >
Callback Number.
–
–
Select Select Language to change
the language of the preset message.
2. Select None, My Phone Number, or
Other. (If you select Other, enter a
callback number.)
Emergency Alerts
Your phone is compatible with federally
supervised cell phone alert services which
send out broadcast SMS messages for
public warning.
Set your Signature
Add a customized signature to each
message you send.
1. From Messaging, select OPTIONS >
Signature.
2. Select On (If you do not wish to attach a
signature to your outgoing messages,
select Off.)
1. From Messaging, select OPTIONS >
Emergency Alerts.
2. Check the box next to the options you
wish to select:
–
Presidential Alerts to deliver a
national Presidential alert.
Presidential Alerts is always grayed
out (not selectable) and cannot be
excluded.
3. Enter a signature and select OK.
Messaging
38
–
–
Imminent Threat - Extreme to
deliver emergency alerts in an
extreme emergency situation (an
extraordinary threat to life or
property).
Imminent Threat - Severe to deliver
emergency alerts in a severe
emergency situation (a significant
threat to life or property).
Amber Alerts to deliver alerts
related to missing or endangered
children.
Emergency Alerts Test Messages
to send a test message to make sure
that the alert messages can be
successfully received.
Simple Data Exchange
This feature makes it easy to select certain
information in a message and automatically
save it or use it in a related application.
Simple Data Exchange works with these
types of information:
Email addresses
Street addresses
Phone numbers
–
–
Web addresses (URLs)
Data Exchange Options
1. When viewing a message, highlight an
email address, a street address, a
phone number, or a Web address (URL)
and press
.
Long Message Reassembly
2. You will find the list of available options.
3. Select an option and complete the
appropriate task.
When you receive a long message, it is
divided into up to 15 messages and
delivered to your phone. You can choose to
combine them to display as one message
rather than segmented ones.
1. From Messaging, select OPTIONS >
Long Message Re-assembly.
2. Select On or Off.
User Guide
39
9 Tools
Tools Menu
Select Tools from the main menu to access the following functions:
Level 1 >
Tools
Level 2 >
Level 3
Activate This
Device
Launch the Device Self Service application.
Alarm
Set an alarm.
Calendar
Access your calendar.
Access these options: On/Off, Visibility, Add New,
Trusted Devices, and My Bluetooth Info.
Bluetooth
Access these options: Update Firmware and
Update Phone
Voice Services
Update PRL.
Access these options: Voice Recognition and
Voice Memo.
Calculator
Countdown
Stopwatch
World Clock
Notepad
Perform basic calculations.
Set a countdown timer.
Use a stopwatch timer.
View times from different time zones.
Use the note pad.
40
Tools
Alarm
Calendar
Your phone comes with a built-in alarm that
has multiple alarm capabilities.
Use Calendar to schedule events and set
reminder alerts.
Set an Alarm
Create an Event
1. From Alarm, select an alarm number.
2. Turn the alarm on or off by selecting the
Alarm field.
3. Enter a description by selecting the
Description field.
1. From Calendar, highlight a day to which
you would like to add an event.
2. Select OPTIONS > Add Schedule and
enter a description. Scroll down to move
to the next field when done.
3. Select a category by selecting the
Category field.
4. Select a time by selecting the
Time field.
4. Select a priority by selecting the
Priority field.
5. Select a start and end time by selecting
the Start and End fields.
–
Scroll left or right to move between
hour, minute and AM/PM fields.
Scroll up or down to change hour,
minute and AM/PM.
–
6. Enter a location by selecting the
Location field. Select EDIT to enter a
text.
7. Select a ringtone option by selecting the
Ringtone field.
8. Select an alarm time by selecting the
Alarm Time field.
9. Select a repeat status by selecting the
Repeat field.
5. Select a repeat status by selecting the
Repeat field.
6. Select a ringtone option by selecting the
Ringtone field.
7. Select a volume level by selecting the
Volume field.
8. Select a ringtone length by selecting the
Ringtone Length field.
9. Select a snooze interval by selecting
the Snooze Interval field.
10.Select SAVE.
10.Select the number of times the snooze
should repeat by selecting the
Snooze Times field.
Tip: To change the calendar display
views, select MONTH or WEEK
repeatedly to toggle between monthly
and weekly views.
11. Select SAVE.
Tip: From Alarm, select ON or OFF to
toggle the alarm on and off.
User Guide
41
Add a To Do List Item
View Events
1. From Calendar, highlight a day to which
you would like add a To Do list item and
select OPTIONS.
2. Scroll right to select Add To Do and
enter a description. Scroll down to move
to the next field when done.
3. Select a category by selecting the
Category field.
4. Select a priority by selecting the
Priority field.
5. Select a time and date for the item by
selecting the Due Time/Date field.
6. Select a status for the item by selecting
the Status field. When you add an item,
set it to Needs Action.
1. From Calendar, select the day for
which you would like to view events or
select OPTIONS > Schedule List or
To Do List.
2. Highlight an event and press
. The
event’s details are displayed. You can
edit the event on this screen.
Delete Events
1. From Calendar, select the day for
which you would like to delete an event
or select OPTIONS > Schedule List or
To Do List.
2. Highlight an event and select OPTIONS
> Delete.
7. Select SAVE.
3. Select one of the following:
–
–
–
This to delete the highlighted event.
Select to delete multiple events.
All on This List to delete all events
on the list.
All Completed Events to delete
completed To Do List items.
Calendar Alerts
If you have an event on the Calendar, your
phone alerts you with a ringing or vibrating
alarm and displays a summary of the
event. To respond to the alarm, do one of
the following:
–
4. Select YES.
Select SNOOZE or Snooze to stop the
alarm and start snooze mode.
Select DISMISS to clear the alarm.
Select View to display the event detail
screen.
Delete Old Events or All
Events
1. From Calendar, select OPTIONS >
Delete Memory.
2. Select Delete Old or Delete All.
3. Select YES.
42
Tools
Bluetooth Menu
The Bluetooth menu allows you to set up
many of the characteristics of your phone's
Bluetooth feature.
From Bluetooth, select from the following
options:
Bluetooth
Bluetooth is a short-range
®
communications technology that allows
you to connect wirelessly to a number of
Bluetooth devices, such as headsets and
hands-free car kits, and Bluetooth-enabled
handhelds, computers, and wireless
phones. The Bluetooth communication
range is usually approximately 30 feet.
Select On/Off to enable or disable
Bluetooth.
Select Visibility > Hidden, Visible for
3 min, or Always visible to set your
Bluetooth visibility.
Turn Bluetooth On and Off
Select Add New to add a new Bluetooth
device.
By default, your phone's Bluetooth feature
is turned off. Turning Bluetooth on enables
your phone's Bluetooth functions.
1. From Bluetooth, select On/Off.
2. Select ON to enable Bluetooth. Select
OFF to disable Bluetooth.
Select Trusted Devices to display a list
of trusted Bluetooth devices.
Select My Bluetooth Info to display
your phone's Bluetooth name, address,
class, and supported profiles.
Make Your Phone
Discoverable
To make your phone discoverable, you
must set your phone’s visibility to other
than Hidden.
1. From Bluetooth, select Visibility.
2. Select Visible for 3 min or
Always visible.
Pair Bluetooth Devices
The Bluetooth pairing process allows you
to establish trusted connections between
your phone and another Bluetooth device.
When devices are paired, a passkey (PIN)
is shared between devices, allowing for
fast, secure connections while bypassing
the discovery and authentication process.
1. From Bluetooth, select Add New.
2. Select the device you wish to pair with.
3. If prompted, accept the connection on
the receiving device, and enter the
same passcode on both your phone
and the other device, or confirm the
auto-generated passcode, and then
select OK.
User Guide
43
4. Edit the device name and select SAVE.
Send Items via Bluetooth
Note: Due to different specifications
and features of other Bluetooth
compatible devices, display and
operations may be different, and
functions such as transfer or exchange
may not be possible.
1. From Bluetooth, select
Trusted Devices.
2. Select the device from the Trusted
Devices list and select TRANSFER...
3. Select Send Contacts,
Send Name Card or
Exchange Name Cards.
4. Follow the onscreen instructions to
select items to send.
View the Trusted Devices List
This list displays a list of devices which are
paired with your phone and set as trusted
devices. From Bluetooth, select
Trusted Devices.
5. Read the message and select SEND.
Use Calculator
1. From Calculator, enter the first number.
Select CONNECT... to connect to the
selected Bluetooth device.
Select TRANSFER... to send data
saved on your phone to the selected
Bluetooth device.
2. Select a mathematical operation:
–
–
–
–
Scroll left to multiply.
Scroll right to divide.
Scroll up to add.
Select OPTIONS to access more
features:
Scroll down to subtract.
–
Add New to add a new Bluetooth
device.
Your selection will appear highlighted.
3. Enter the second number, and press
to view the result.
–
Delete or Delete All to delete the
selected device or all devices from
the list.
4. Select CLEAR to clear all numbers.
–
Auto-Accept to configure your
phone’s accessibility to other
Bluetooth devices.
Countdown
–
–
View/Edit Info to view or edit the
information of the selected device.
Help to display the Trusted Devices
list help.
This feature allows you to use your phone
as a countdown timer to alert you when a
specified period of time has elapsed.
1. From Countdown, select a countdown
timer number.
2. Enter the time length by selecting the
Time field.
44
Tools
–
–
Scroll left or right to move between
minutes or seconds fields.
Scroll up or down to change minutes
or seconds.
Notepad
Your phone offers a simple notepad to
allow you store your notes.
3. Turn the alarm On or Off by selecting
the Alarm field.
4. Select SAVE.
Write a Note
1. From Notepad, select Add New…
2. Enter a note and select OK.
Tip: When the countdown is complete,
select DISMISS to silence the alarm.
View a Note
From Notepad, select a note to open
note.
Use Stopwatch
From Stopwatch, select from the
Edit a Note
1. From Notepad, highlight a note you
want to edit and select EDIT.
following options:
MODE selects split timing or lap timing.
START begins counting.
SPRIT or LAP records the time.
STOP pauses counting.
2. Edit the note and select OK.
Delete a Note
1. From Notepad, highlight a note you
want to delete.
RESET clears the stopwatch.
2. Select DELETE > This.
3. Select YES.
World Clock
Use World Clock to view the local time in
Delete All Notes
1. From Notepad, select DELETE > All.
2. Select YES.
various cities around the world.
From World Clock, scroll left or right to
view the time in different locations.
Note: Select OPTIONS > Standard or
Summer to change between daylight
saving time and standard time.
User Guide
45
Call a Contact or a Number By
Voice Recognition
1. Start Voice Recognition.
2. When prompted to speak, say Call
<Name or #>. For example, to call John
Smith's mobile phone, say “Call John
Smith Mobile.” Your phone will
Voice Services
Your phone’s voice services let you place
calls using your voice, store voice reminders,
and record memos right on your phone.
Voice Recognition
You can use your phone’s built-in
automatic speech recognition (ASR)
software to dial a phone number or to
launch phone functions. All you have to do
is to talk into the phone, and ASR will
recognize your voice and complete tasks
by itself.
To control the settings associated with
voice recognition, see “Voice Recognition
automatically call the said contact.
Note: If the application cannot
recognize the number or name, it
displays several possible matches. Say
Yes or No.
Send Text Message By Voice
Recognition
1. Start Voice Recognition.
2. When prompted to speak, say
Send Message <Name or #>. For
example, to send a text message to
Joe, say “Send Message Joe.”
Start Voice Recognition
Do one of the following to start Voice
Recognition:
Press and hold
From the Tools menu, select
Voice Services > Voice Recognition.
or
.
Note: If the application cannot
recognize the number or name, it
displays several possible matches. Say
Yes or No.
Use Voice Recognition
1. Start Voice Recognition.
2. When prompted to speak, say a
command from the displayed list on
screen. When the application
recognizes the command, it executes
the command right away.
3. The compose message screen
appears. The contact name or number
that you said is displayed on the To box.
Complete your message.
4. Select SEND to send the text message.
Tip: During ASR operation, select
TUTORIAL or HELP to get instructions
for using the software.
46
Tools
Search Contact Details By Voice
Recognition
Configure Voice Recognition
Settings
1. Start Voice Recognition.
1. Start Voice Recognition.
2. Select SETTINGS.
3. Select to configure one of the following
settings:
2. When prompted to speak, say Lookup
<Name>. For example, to search for
Jessica’s contact details, say “Lookup
Jessica.” The contact details screen is
displayed.
–
Confirmation to control when the
system asks you to confirm a name
or number.
Open Menus By Voice Recognition
1. Start Voice Recognition.
2. When prompted to speak, say
Go To <Menu>. For example, to open
Settings, say “Go To Settings.” The
phone opens the selected menu.
–
Adaptation to improve the accuracy
of the application’s speech
recognition.
–
–
–
Audio Modes to set the mode of
audio assistance.
Dialing Region to specify the dialing
region.
Tip: Say "More Options" to display
additional application names.
About to view the software version.
Check Item By Voice Recognition
Voice Memo
Use Voice Memo to record and play back
audio memos.
1. Start Voice Recognition.
2. When prompted to speak, say Check
<Item>. For example, to check the
signal strength status, say “Check
Signal Strength” to display information
on screen.
Record Voice Memos
1. From Voice Services, select
Voice Memo > Record.
2. Record your voice memo.
3. Select STOP when done.
Available checkable items are as follows:
Status, Time, Signal Strength, Network,
Battery, and My Phone Number.
Play Voice Memos
View Voice Recognition Tutorial
1. From Voice Services, select Voice
Memo > List and highlight a memo.
2. Select PLAY to play the memo or
OPTIONS to access more features.
1. Start Voice Recognition.
2. Select TUTORIAL.
User Guide
47
10 History
History List Options
When you are viewing a history list, select
OPTIONS. You have the following options:
Work with History
View History List
New Group to create a new group
entry.
Contact Details to display information
about the entry if it has already been
saved in your Contacts.
From the home screen, press
.
– or –
Select History from the main menu.
History Icons
You can determine if an entry was an
incoming, outgoing, or missed call from the
icons shown below.
Save Contact to save a phone number.
Delete to delete the entry.
Delete All to delete all History entries.
Prepend to add numbers to the
beginning of the selected number.
= Incoming Call
= Outgoing Call
= Missed Call
Delete a Single Record
1. From the History list, highlight an entry.
2. Select OPTIONS > Delete > DELETE.
View History Thread
The History thread screen shows all history
Delete All History Records
1. From the History list, highlight an entry.
2. Select OPTIONS > Delete All >
DELETE.
for a selected entry.
From the History list, highlight an entry
and press
.
Tip: Text messages are included in the
History thread.
Make a Call From History
1. From the History list, highlight an entry.
2. Press
to call the number or select
OPTIONS to access more features.
History
48
11 Web
Add a Bookmark
Surf the Web
1. Surf to the Web page you want to
bookmark and select Options >
Add this page to Bookmarks.
2. Edit the bookmark’s details, if needed.
3. Select SaveChange to save the
bookmark.
You can use your phone to browse the
Internet if you have obtained phone
Internet services from your service provider
and if over-the-air Internet access is
available in your area.
Launch Browser
Tip: To access your saved bookmarks,
select Options > View all bookmarks
from any web page.
Select Web from the main menu.
Note: If Net Guard is enabled and
displayed, select YES to continue and
launch the browser.
Search the Web
From Web, select Options >
Search the web to go directly to the
browser’s search page.
Browse the Web
A browser home page with a list of
bookmarks and some browser menu
options appear when you are connected to
the Web. The lock icon appears in a secure
session. You can do the following:
Tip: You can also press and hold
from the home screen to search the
web.
To choose a site, scroll to the link and
press the appropriate softkey.
To scroll line by line through websites,
use the navigation key.
Press
screen.
Press
to return to the previous
to exit.
Select Navigation to use the navigation
window.
Select Options to access more browser
features.
User Guide
49
12 Get Help
The steps you took to reproduce the
problem.
The phone’s mobile equipment ID
(MEID). To locate the MEID, select
MENU > Settings > Phone Info >
My Phone# and scroll down.
Customer Support
To contact Assurance Wireless’s customer
support department for information about
your phone, account history, call coverage
area, and specific features available to you,
such as call forwarding or voicemail:
Dial *VM from your Assurance Wireless
phone.
Qualified Service
If the problem with your phone persists,
return the phone with all accessories and
packaging to the dealer for qualified
service.
Dial 1-888-321-5880 from any phone.
For questions about the phone features,
refer to the materials provided with your
phone, or visit
Phone Accessories
To shop for accessories for your phone, visit
For additional questions, you may contact
the Kyocera Communications Inc. Customer
Care Center in any of the following ways:
Email:
Become a Product
Evaluator
Phone: 1-800-349-4478 (U.S. and
Canada) or 1-858-882-1401.
To participate in the testing and evaluation
of Kyocera Communications Inc. products,
including cellular or PCS phones, visit
Before requesting support, please try to
reproduce and isolate the problem. When
you contact the Customer Care Center, be
ready to provide the following information:
The name of your service provider:
Assurance Wireless.
The actual error message or problem
you are experiencing.
Get Help
50
Important Safety Information
This section contains important operational
and safety information that will help you
safely use your phone. Failure to read and
follow the information provided in this
section may result in serious bodily injury,
death, or property damage.
Note: For the best care of your phone,
only Kyocera-authorized personnel
should service your phone and
accessories. Failure to do so may be
dangerous and void your warranty.
Maintaining Safe Use of
General Precautions
There are several simple guidelines to
operating your phone properly and
maintaining safe, satisfactory service.
and Access to Your Phone
Do Not Rely on Your Phone
for Emergency Calls
Mobile phones operate using radio signals,
which cannot guarantee connection in all
conditions. Therefore you should never rely
solely upon any mobile phone for essential
communication (e.g., medical
emergencies). Emergency calls may not be
possible on all cellular networks or when
certain network services or mobile phone
features are in use. Check with your local
service provider for details.
To maximize performance, do not touch
the portions of your phone where the
internal antennas are located while
using the phone.
Speak directly into the mouthpiece.
Avoid exposing your phone and
accessories to rain or liquid spills. If your
phone does get wet, immediately turn
the power off and remove the battery.
Do not expose your phone to direct
sunlight for extended periods of time
(such as on the dashboard of a car).
Although your phone is quite sturdy, it is
a complex piece of equipment and can
be broken. Avoid dropping, hitting,
bending, or sitting on it.
Using Your Phone While
Driving
Talking on your phone while driving (or
operating the phone without a hands-free
device) is prohibited in some jurisdictions.
Laws vary as to specific restrictions.
Any changes or modifications to your
phone not expressly approved in this
document could void your warranty for
this equipment and void your authority
to operate this equipment.
Remember that safety always comes first.
User Guide
51
Following Safety Guidelines
Turning Off Your Phone
Before Flying
To operate your phone safely and
efficiently, always follow any special
regulations in a given area. Turn your
phone off in areas where use is forbidden
or when it may cause interference or
danger.
Turn off your phone before boarding any
aircraft. To prevent possible interference
with aircraft systems, the U.S. Federal
Aviation Administration (FAA) regulations
require you to have permission from a crew
member to use your phone while the plane
is on the ground. To prevent any risk of
interference, FCC regulations prohibit
using your phone while the plane is in the
air.
Using Your Phone Near Other
Electronic Devices
Most modern electronic equipment is
shielded from radio frequency (RF) signals.
However, RF signals from wireless phones
may affect inadequately shielded electronic
equipment.
Turning Off Your Phone in
Dangerous Areas
To avoid interfering with blasting
operations, turn your phone off when in a
blasting area or in other areas with signs
indicating two-way radios should be turned
off. Construction crews often use
remote-control RF devices to set off
explosives.
RF signals may affect improperly installed
or inadequately shielded electronic
operating systems or entertainment
systems in motor vehicles. Check with the
manufacturer or their representative to
determine if these systems are adequately
shielded from external RF signals. Also
check with the manufacturer regarding any
equipment that has been added to your
vehicle.
Turn your phone off when you’re in any
area that has a potentially explosive
atmosphere. Although it’s rare, your phone
and accessories could generate sparks.
Sparks can cause an explosion or fire,
resulting in bodily injury or even death.
These areas are often, but not always,
clearly marked. They include:
Consult the manufacturer of any personal
medical devices, such as pacemakers and
hearing aids, to determine if they are
adequately shielded from external RF
signals.
Fueling areas such as gas stations.
Below deck on boats.
Fuel or chemical transfer or storage
facilities.
Note: Always turn off the phone in
healthcare facilities, and request
permission before using the phone near
medical equipment.
Important Safety Information
52
Areas where the air contains chemicals
or particles such as grain, dust, or metal
powders.
Any other area where you would
normally be advised to turn off your
vehicle’s engine.
hearing devices to determine usability
rating categories for both.
Ratings have been developed for mobile
phones to assist hearing device users find
phones that may be compatible with their
hearing device. Not all phones have been
rated for compatibility with hearing devices.
Phones that have been rated have a label
located on the box. Your JAX has an M4
and a T4 rating.
Note: Never transport or store
flammable gas, flammable liquids, or
explosives in the compartment of your
vehicle that contains your phone or
accessories.
These ratings are not guarantees. Results
will vary depending on the user’s hearing
device and individual type and degree of
hearing loss. If a hearing device is
particularly vulnerable to interference
noise; even a phone with a higher rating
may still cause unacceptable noise levels
in the hearing device. Trying out the phone
with your hearing device is the best way to
evaluate it for your personal needs.
Restricting Children’s Access
to Your Phone
Your phone is not a toy. Do not allow children
to play with it as they could hurt themselves
and others, damage the phone or make calls
that could potentially cost you money.
Using Your Phone With a
Hearing Aid Device
When some wireless phones are used with
certain hearing devices (including hearing
aids and cochlear implants), users may
detect a noise which can interfere with the
effectiveness of the hearing device.
M-Ratings: Phones rated M3 or M4 meet
FCC requirements for hearing aid
compatibility and are likely to generate less
interference to hearing devices than
unrated phones. (M4 is the better/higher of
the two ratings.)
T-Ratings: Phones rated T3 or T4 meet
FCC requirements and are likely to be
more usable with a hearing device’s telecoil
(“T Switch” or “Telephone Switch”) than
unrated phones. (T4 is the better/higher of
the two ratings. Note that not all hearing
devices have telecoils in them.)
Some hearing devices are more immune
than others to this interference noise, and
phones also vary in the amount of
interference noise they may generate.
ANSI standard C63.19 was developed to
provide a standardized means of
Note: This phone has been tested and
rated for use with hearing aids for some
measuring both wireless phone and
User Guide
53
of the wireless technologies that it uses.
However, there may be some newer
wireless technologies used in this phone
that have not been tested yet for use with
hearing aids. It is important to try the
different features of this phone
thoroughly and in different locations,
using your hearing aid or cochlear
implant, to determine if you hear any
interfering noise. Consult your service
provider or the manufacturer of this
phone for information on hearing aid
compatibility. If you have questions about
return or exchange policies, consult your
service provider or phone retailer.
Getting the Best Hearing Device
Experience With Your Phone
To further minimize interference, move the
phone around to find the point with least
interference.
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get
the most out of your battery’s performance.
Recently there have been some public
reports of wireless phone batteries
overheating, catching fire, or exploding.
It appears that many, if not all, of these
reports involve counterfeit or
inexpensive, aftermarket-brand
batteries with unknown or questionable
manufacturing standards. Use only
manufacturer-approved batteries and
accessories. Buying the right batteries
and accessories is the best way to
ensure they’re genuine and safe.
Do not disassemble or open, crush,
bend or deform, or puncture or shred
the battery.
Hearing aid devices may also be measured
for immunity to interference noise from
wireless phones and should have ratings
similar to phones. Ask your hearing
healthcare professional for the rating of
your hearing aid. Add the rating of your
hearing aid and your phone to determine
probable usability:
Any combined rating equal to or greater
than six offers excellent use.
Any combined rating equal to five is
considered normal use.
Any combined rating equal to four is
considered usable.
Thus, if you pair an M3 hearing aid with an
M3 phone, you will have a combined rating
of six for “excellent use.” This is
Do not modify or remanufacture,
attempt to insert foreign objects into the
battery, immerse or expose to water or
other liquids, expose to fire, explosion,
or other hazard.
synonymous for T ratings.
More information about hearing aid
compatibility may be found at:
Important Safety Information
54
Avoid dropping the phone or battery. If
the phone or battery is dropped,
especially on a hard surface, and the
user suspects damage, take it to a
service center for inspection.
Improper battery use may result in a
fire, explosion or other hazard.
Do not short-circuit a battery or allow
metallic conductive objects to contact
battery terminals.
Keep the metal contacts on top of the
battery clean.
Battery usage by children should be
supervised.
time. It’s best to follow these storage
rules:
–
Less than one month:
-4° F to 140° F (-20° C to 60° C)
More than one month:
–
-4° F to 113° F (-20° C to 45° C)
Disposal of Lithium Ion
(Li-Ion) Batteries
Promptly dispose of used batteries in
accordance with local regulations.
Never dispose of the battery by
incineration.
Do not handle a damaged or leaking
Li-Ion battery as you can be burned.
For safe disposal options of your Li-Ion
batteries, contact your nearest
authorized service center.
Charging
In order to avoid damage, charge the
battery only in temperatures that range
from 32° F to 113° F (0° C to 45° C).
Don’t use the battery charger in direct
sunlight or in high humidity areas, such
as the bathroom.
The battery may need recharging if it
has not been used for a long period of
time.
It’s best to replace the battery when it
no longer provides acceptable
performance. It can be recharged
hundreds of times before it needs
replacing.
Special Note: Be sure to dispose of
your battery properly. In some areas,
the disposal of batteries in household or
business trash may be prohibited.
Radio Frequency (RF)
Energy
Understanding How Your
Phone Operates
Your phone is basically a radio transmitter
and receiver. When it’s turned on, it
Storing
receives and transmits radio frequency
(RF) signals. When you use your phone,
the system handling your call controls the
Don’t store the battery in high
temperature areas for long periods of
User Guide
55
power level. This power can range from
0.006 watt to 0.2 watt in digital mode.
centimeters) from your body when
transmitting. Use of non-Kyocera-approved
accessories may violate FCC RF exposure
guidelines. Other accessories used with
this phone for body-worn operations must
not contain any metallic components and
must provide at least 0.59 inches (1.5
centimeters) separation distance between
the antennas and the user’s body.
Knowing Radio Frequency
Safety
The design of your phone complies with
updated NCRP standards described below.
In 1991–92, the Institute of Electrical and
Electronics Engineers (IEEE) and the
American National Standards Institute
(ANSI) joined in updating ANSI’s 1982
standard for safety levels with respect to
human exposure to RF signals. More than
120 scientists, engineers and physicians
from universities, government health
agencies and industries developed this
updated standard after reviewing the
available body of research. In 1993, the
Federal Communications Commission
(FCC) adopted this updated standard in a
regulation. In August 1996, the FCC
adopted hybrid standard consisting of the
existing ANSI/IEEE standard and the
guidelines published by the National
Council of Radiation Protection and
Measurements (NCRP).
For more information about RF exposure,
Specific Absorption Rates
(SAR) for Wireless Phones
The SAR value corresponds to the relative
amount of RF energy absorbed into the
head of a user of a wireless handset.
The SAR value of a phone is the result of
an extensive testing, measuring and
calculation process. It does not represent
how much RF the phone emits. All phone
models are tested at their highest value in
strict laboratory settings. But when in
operation, the SAR of a phone can be
substantially less than the level reported to
the FCC. This is because of a variety of
factors including its proximity to a base
station antenna, phone design and other
factors. What is important to remember is
that each phone meets strict federal
guidelines. Variations in SARs do not
represent a variation in safety.
Body-Worn Operation
To maintain compliance with FCC RF
exposure guidelines, if you wear a handset
on your body, use a Kyocera-supplied or
Kyocera-approved carrying case, holster or
other body-worn accessory. If you do not
use a body-worn accessory, ensure the
antennas are at least 0.59 inches (1.5
All phones must meet the federal standard,
which incorporates a substantial margin of
safety. As stated above, variations in SAR
Important Safety Information
56
values between different model phones do
not mean variations in safety. SAR values at
or below the federal standard of 1.6 W/kg
are considered safe for use by the public.
The highest reported SAR values of the
JAX are:
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
Head: 1.28 W/kg
Body-worn: 1.26 W/kg
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
FCC Radio Frequency
Emission
This phone meets the FCC Radio
Frequency Emission Guidelines.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
FCC ID number: V65S1360
encouraged to try to correct the interference
by one or more of the following measures:
More information on the phone’s SAR can
be found from the following FCC website:
Reorient the direction of the internal
antennas.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
FCC Notice
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device may
not cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation.
Owner’s Record
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
The model number, regulatory number, and
serial number are located on a nameplate
inside the battery compartment. Record the
serial number in the space provided below.
This will be helpful if you need to contact us
about your phone in the future.
Note: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules.
Model: JAX (S1360)
Serial No.:
User Guide
57
Manufacturer’s Warranty
Kyocera Communications Inc. (“KYOCERA”)
offers you a limited warranty that the enclosed
product or products (the “Product”) will be free
from defects in material and workmanship for
a period that expires one year from the date of
sale of the Product to you, provided that you
are the original end-user purchaser of the
Product and provided that your purchase was
made from an authorized supplier. Transfer or
resale of a Product will automatically terminate
warranty coverage with respect to that
Product.
installed, repaired, maintained or modified
(including the antenna); (ii) Products which
have been subjected to misuse (including
Products used in conjunction with hardware
electrically or mechanically incompatible or
Products used with software, accessories,
goods or ancillary or peripheral equipment not
supplied or expressly authorized by
KYOCERA for use), abuse, accident, physical
damage, abnormal use or operation, improper
handling or storage, neglect, exposure to fire,
water or excessive moisture or dampness or
extreme changes in climate or temperature;
(iii) Products operated outside published
maximum ratings; (iv) cosmetic damage; (v)
Products on which warranty stickers or
Product serial numbers have been removed,
altered, or rendered illegible; (vi) customer
instruction; (vii) cost of installation, set up,
removal or reinstallation; (viii) signal reception
problems (unless caused by defect in material
or workmanship); (ix) damage the result of
fire, flood, acts of God or other acts which are
not the fault of KYOCERA and which the
Product is not specified to tolerate, including
damage caused by mishandling and blown
fuses; (x) consumables (such as memory
cards, fuses, etc.); (xi) third party software or
applications, data and equipment not originally
supplied with the Product; (xii) any Product in
which the software has not been updated to
the current version; (xiii) any Product in which
the operating system has been unlocked
(allowing installation of a third party operating
system); or (xiv) any Products which have
been opened, repaired, modified or altered by
This limited warranty is not transferable to any
third party, including but not limited to any
subsequent purchaser or owner of the
Product. KYOCERA shall, at its sole and
absolute discretion, either repair or replace a
Product (which unit may use refurbished parts
of similar quality and functionality) if found by
KYOCERA to be defective in material or
workmanship, or if KYOCERA determines that
it is unable to repair or replace such Product,
KYOCERA shall refund the purchase price for
such Product, provided that the subject
Product (i) is returned, with transportation
prepaid, to a KYOCERA authorized service
center within the one year warranty period,
and (ii) is accompanied by a proof of purchase
in the form of a bill of sale or receipted invoice
which evidences that the subject Product is
within the one year warranty period (“Proof of
Purchase”). After the one year warranty
period, you must pay all shipping, parts and
labor charges. This limited warranty does not
cover and is void with respect to the following:
(i) Products which have been improperly
Manufacturer’s Warranty
58
anyone other than KYOCERA or a KYOCERA
authorized service center. Before returning
any Product for service, be sure to back up
data and remove any confidential, proprietary,
or personal information from the Product.
KYOCERA is not responsible for damage to or
loss of any software, applications, data or
removable storage media.
UNDER THIS WARRANTY, ARE YOUR
SOLE AND EXCLUSIVE REMEDIES FOR
BREACH OF THE LIMITED WARRANTY,
AND SUBJECT TO THIS WARRANTY, THE
PRODUCTS ARE APPROVED AND
ACCEPTED BY YOU “AS IS”.
KYOCERA MAKES NO OTHER
WARRANTIES, REPRESENTATIONS OR
CONDITIONS OF ANY KIND, ORAL OR
VERBAL, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, WITH
RESPECT TO THE PRODUCTS,
INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR AGAINST
INFRINGEMENT OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT
OF TRADE USAGE OR OUT OF A COURSE
OF DEALING OR COURSE OF
USE ONLY KYOCERA APPROVED
ACCESSORIES WITH KYOCERA PHONES.
USE OF ANY UNAUTHORIZED
ACCESSORIES MAY BE DANGEROUS AND
WILL INVALIDATE THE PHONE WARRANTY
IF SAID ACCESSORIES CAUSE DAMAGE
OR A DEFECT TO THE PHONE.
KYOCERA SPECIFICALLY DISCLAIMS
LIABILITY FOR ANY AND ALL DIRECT,
INDIRECT, SPECIAL, GENERAL, PUNITIVE,
EXEMPLARY, AGGRAVATED, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, EVEN IF
ADVISED OF THE POSSIBILITY THEREOF,
WHETHER FORESEEABLE OR
UNFORESEEABLE OF ANY KIND
WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOSS OF PROFITS,
PERFORMANCE. NO DEALER,
DISTRIBUTOR, AGENT OR EMPLOYEE IS
AUTHORIZED TO MAKE ANY
MODIFICATION OR ADDITION TO THIS
WARRANTY.
UNANTICIPATED BENEFITS OR REVENUE,
ANTICIPATED PROFITS ARISING OUT OF
USE OF OR INABILITY TO USE ANY
PRODUCT (FOR EXAMPLE, WASTED
AIRTIME CHARGES DUE TO THE
MALFUNCTION OF A PRODUCT) OR
CONTRIBUTION OR INDEMNITY IN
RESPECT OF ANY CLAIM RELATED TO A
PRODUCT.
Some jurisdictions do not allow the exclusion
or limitation of incidental or consequential
damages, or allow limitations on how long an
implied warranty lasts, so the above limitations
or exclusions may not apply to you. This
limited warranty gives you specific legal rights,
and you may also have other rights which vary
from jurisdiction to jurisdiction. For warranty
service information, please call the following
telephone number from anywhere in the
continental United States and Canada:
REPAIR OR REPLACEMENT OF A
DEFECTIVE PRODUCT OR REFUND OF
THE PURCHASE PRICE RELATING TO A
DEFECTIVE PRODUCT, AS PROVIDED
1-800-349-4478 or 858-882-1401.
User Guide
59
End User License Agreement
Kyocera Communications, Inc. (“Kyocera”)
End User License Agreement
CAREFULLY READ THE FOLLOWING
TERMS AND CONDITIONS
be incorporated by reference or otherwise
presented to you prior to your use of the
Software, Kyocera grants you a limited,
non-exclusive, license to use Kyocera and third
party proprietary software and services found
on your Kyocera device and/or packaged with
your Kyocera device, including any updates to
such material by whatever means provided,
and any related documentation (“Software”).
You may use the Software only as expressly
authorized by this Agreement.
(“AGREEMENT”) BEFORE USING OR
OTHERWISE ACCESSING THE SOFTWARE
OR SERVICES PROVIDED WITH YOUR
KYOCERA DEVICE. THE SOFTWARE AND
SERVICES PROVIDED WITH YOUR
KYOCERA DEVICE ARE SOLELY FOR
PERSONAL USE BY YOU, THE ORIGINAL
END USER, AS SET FORTH BELOW.BY
ACTIVATING, USING, DOWNLOADING OR
INSTALLING THIS KYOCERA DEVICE
AND/OR THE SOFTWARE PROVIDED WITH
IT, YOU ARE AGREEING TO BE BOUND BY
THE TERMS OF THIS LICENSE
AGREEMENT. IF YOU DO NOT AGREE TO
THE TERMS AND CONDITIONS OF THIS
AGREEMENT, DO NOT USE, DOWNLOAD
OR OTHERWISE ACCESS THE SOFTWARE
OR SERVICES AND (I) PROMPTLY
RETURN THE SOFTWARE OR SERVICE TO
KYOCERA OR DELETE IT; OR (II) IF YOU
HAVE PURCHASED THE KYOCERA
DEVICE ON WHICH THE SOFTWARE OR
SERVICE IS PRE-INSTALLED, PROMPTLY
RETURN THE DEVICE AND THE
Limitations: This Software is licensed for use
only on the single Kyocera device you
originally purchased. You acknowledge and
agree that ownership of the Software and all
other rights associated with the Software not
expressly granted in this Agreement are
retained by Kyocera or its suppliers or
licensors. You are not permitted to, in any way,
distribute the Software or make it available
over a network for use on more than the single
Kyocera device for which it was originally
supplied. The Software may be copied only as
permitted by applicable law and as necessary
for backup purposes. You may not remove any
proprietary notices or labels on the Software
or any copies thereof. You may not in any way,
modify, reverse engineer, decompile,
disassemble or create derivative works based
on the Software (except to the extent that this
restriction is expressly prohibited by law). You
agree that you will not attempt to circumvent,
disable or modify any security technology
associated with the Software. You may use
the Software only in a manner that complies
with all applicable laws in the jurisdictions in
ACCOMPANYING SOFTWARE (INCLUDING
DOCUMENTATION AND PACKAGING) TO
KYOCERA OR THE KYOCERA
AUTHORIZED DISTRIBUTOR FROM WHICH
YOU PURCHASED THE KYOCERA
DEVICE.
License: Subject to the terms and conditions of
this Agreement and any other terms that may
End User License Agreement
60
which you use it, including, but not limited to,
applicable restrictions concerning copyright
and other intellectual property rights and/or
the export control regulations.
and restrictions granted in this Agreement, but
solely with respect to such Open Source
Software.
Disclaimer of Warranty and Liability: THE
SOFTWARE IS PROVIDED “AS IS”
WITHOUT WARRANTY OF ANY KIND.
KYOCERA FURTHER DISCLAIMS ALL
WARRANTIES, INCLUDING WITHOUT
LIMITATION ANY IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE,
NONINFRINGEMENT, TITLE, ACCURACY,
CORRESPONDENCE WITH DESCRIPTION
AND SATISFACTORY QUALITY. TO THE
MAXIMUM EXTENT PERMISSIBLE BY LAW,
THE ENTIRE RISK ARISING OUT OF THE
USE OR PERFORMANCE OF THE
SOFTWARE REMAINS WITH YOU. IN NO
EVENT WILL KYOCERA, ITS EMPLOYEES,
OFFICERS, SHAREHOLDERS,
LICENSORS, SUPPLIERS, CARRIER OR
DISTRIBUTOR CUSTOMERS OR
AFFILIATES BE HELD LIABLE FOR ANY
CONSEQUENTIAL, INCIDENTAL,
INDIRECT, SPECIAL, PUNITIVE, OR OTHER
DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, LOSS OF BUSINESS
INFORMATION, OR OTHER PECUNIARY
LOSS) ARISING OUT OF THIS
AGREEMENT OR THE USE OF OR
INABILITY TO USE THE SOFTWARE,
WHETHER BASED IN CONTRACT, TORT
(INCLUDING NEGLIGENCE), STRICT
PRODUCT LIABILITY OR ANY OTHER
THEORY, EVEN IF KYOCERA HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES AND EVEN IF ANY LIMITED
Some of the Software packaged with your
Kyocera device may be provided by third
parties (“Third Party Software”). Third Party
Software may also be available from third
party content distributors such as application
stores. Third Party content may be subject to
different or additional terms and conditions as
determined by the Third Party Software
provider. THIRD PARTY SOFTWARE IS NOT
A KYOCERA PRODUCT. KYOCERA IS NOT
RESPONSIBLE FOR AND HAS NO
LIABILITY WITH REGARD TO THIRD
PARTY SOFTWARE.
Open Source Software: The Software
contains certain open source software which
may be subject to the GNU General Public
License (“GPL”), GNU Library/ Lesser General
Public License (“LGPL”) and/or other
copyright licenses, disclaimers and notices
(“Open Source License Terms”). The
applicable Open Source License Terms for the
corresponding Open Source Software are
reproduced and available at
Please refer to the Open Source License
Terms regarding your rights under such
licenses to the Open Source Software. To the
extent any such agreement requires that
Kyocera provide you the rights to copy, modify,
distribute or otherwise use any Open Source
Software that are inconsistent with the limited
rights granted to you in this Agreement, then
such rights in the applicable Open Source
License shall take precedence over the rights
User Guide
61
REMEDY IS DEEMED TO HAVE FAILED ITS
ESSENTIAL PURPOSE. KYOCERA’S
TOTAL LIABILITY FOR ANY DAMAGES
UNDER THIS AGREEMENT SHALL NEVER
EXCEED THE PURCHASE PRICE YOU
PAID FOR THE KYOCERA DEVICE.
safety or security concerns or government
restrictions or court orders.
Kyocera reserves the right to modify the terms of
this Agreement at its sole discretion. Any such
modification will be effective upon Kyocera or a
Kyocera affiliate or agent sending notice to you
by email, text message, other electronic
communication or postal mail. Your continued
use of the Software after such notice will
constitute your binding acceptance of the
Agreement as revised. Additionally, some
Software may be subject to different or additional
terms presented to you through a separate
click-through or other type of agreement or
notice prior to your use of such Software.
No software is fault free. The Software is
designed for use in systems that do not
require fail-safe performance. You may not
use the software in any device or system in
which a malfunction of the software would
result in foreseeable risk of loss, injury or
death to any person. This includes operation
of nuclear or infrastructure facilities, medical
equipment, aircraft navigation or
communication systems or use in risky or
dangerous situations or environments.
Termination: This License Agreement will
automatically terminate without notice from or
action by Kyocera if you fail to comply with any
term hereof.
Consent to Use of Data: You agree that
Kyocera, its affiliates and its designated
agents may collect and use technical and
related information, gathered in any manner,
as part of its product support services.
Kyocera, its affiliates and designated agents
may use this information solely to improve its
products or to provide customized services or
technologies to you. Kyocera will collect and
use this information in accordance with its
privacy policy and accordance with applicable
data protection laws. Kyocera, its affiliates and
designated agents may disclose this
Governing Law: This Agreement is governed
by the laws of State of California except any
conflict of law provisions. The U.N.
Convention on Contracts for the International
Sales of Goods is hereby excluded in its
entirety from this Agreement.
Severability: If any provision of this
Agreement is found to be invalid, illegal or
unenforceable, the validity, legality or
enforceability of the remaining provisions will
not in any way be impacted or impaired.
information to others, but not in a form that
personally identifies you.
Entire Agreement: By using or otherwise
accessing the Software, you agree that this
Agreement sets forth the entire agreement
between you and Kyocera with regard to the
Software and supersedes all prior
agreements, notwithstanding the terms of any
such agreements.
Modification of Software and Terms of Use:
Kyocera reserves the right to from time to time
modify any portion of the Software. Kyocera
may be required to take these actions due to
restrictions from third party licensors or due to
End User License Agreement
62
Index
A
C
abbreviated dialing, 27
accessibility, 24
accessories
calculator, 44
calendar
headsets, 28
adding an event, 41
alerts, 42
TTY device, 26
airplane mode, 26
alarm, 41
deleting events, 42
viewing events, 42
calls
alerts
answering, 10
any key answer, 27
auto answer, 28
call answer mode, 27
emergency, 12
ending, 11
event, 42
notification, 27
Assurance Wireless
account information, 17
B
history, 48
making, 10
backlight, 20
battery
plus code dialing, 12
redialing, 10
disposal, 55
installing, 5
silencing, 11
voice recognition, 46
recharging, 5
safety guidelines, 54
Bluetooth
clock
display, 21
world clock, 45
contact groups, 33
contacts
activating, 43
pairing, 43
trusted devices list, 44
visibility, 43
bookmarks, 49
browser
adding, 30
adding prefixes, 32
assigning pictures, 32
assigning ringtones, 32
calling, 31
bookmarks, 49
launching, 49
navigating, 49
searching, 49
deleting, 33
dialing services, 33
editing, 32
User Guide
63
ICE contacts, 34
number types, 32
sending messages, 31
viewing, 30
help
getting, 50
history
deleting, 48
voice search, 46
icons, 48
list, 48
options, 48
contacts list, 30
countdown timer, 44
customer support, 50
I
D
data settings
disable, 28
important safety information, 51
in case of emergency (ICE) contacts
adding, 34
enable, 28
net guard, 28
update data profile, 28
display
calling, 34
emergency message, 34
information, 34
brightness, 20
language, 28
main view, 20
downloading, 16
Internet, 49
K
keyguard
activating, 22
unlocking, 22
keypad light, 21
E
earpiece, 10
emergency calls, 12
emergency message, 34
emergency services, 12
End User License Agreement, 60
L
language, 28
location information, 29
lock code, 23
locking your phone, 23
G
greeting, 21
groups
M
manufacturer’s warranty, 58
menus
adding contacts, 33
deleting, 33
editing, 33
main, 8
messaging, 35
my stuff, 16
navigation, 9
setting main view, 20
settings, 19
H
headset mode, 28
64
Index
tools, 40
phone information, 23
programming, 4
resetting, 24
messaging
accessing messages, 36
clear alerts icon, 37
creating a text message, 36
emergency alerts, 38
long message reassembly, 39
message alerts, 38
preset messages, 38
replying, 36
service, 50
turn on and off, 10
unlocking, 23
power save mode, 21
R
resetting phone, 24
ringtones
settings, 37
downloading, 16
threaded messaging, 36
missed alerts, 12
S
services
missed call notification, 12
my account, 17
dialing, 33
settings
check balance, 17
accessibility, 24
alerts, 27
my phone number, 23
call setup options, 27
data settings, 28
display, 20
N
navigation shortcuts, 29
notepad, 45
notification pop-up, 20
number prefixes, 32
number types, 32
location, 29
ringtones, 16
text entry, 22
volume, 21
P
simple data exchange, 39
speed dial list
clearing, 33
using, 11
stopwatch, 45
symbols, 14
phone
answering calls, 10
changing lock code, 23
codes, 31
deleting content, 24
extensions, 31
icons, 7
locking, 23
making calls, 10
overview, 6
T
letters, 13
User Guide
65
modes, 13
numbers, 13
rapid entry, 14
symbols, 14
volume
earpiece, 11
escalate setting, 21
incoming ringtone, 21
keypad, 21
text messages, 36
tools, 40
alarm, 41
playback volume, 21
power up/down, 21
Bluetooth, 43
calculator, 44
calendar, 41
W
warranty, 58
countdown, 44
notepad, 45
web browser, 49
world clock, 45
stopwatch, 45
voice memo, 47
voice recognition, 46
world clock, 45
top-up, 17
TTY device, 26
V
vibrate type, 26
voice guide, 25
voice memo
playing, 47
recording, 47
voice recognition
adaptation, 25
audio modes, 25
finding contacts, 46
opening menus, 47
sending message, 46
using, 46
voicemail
checking, 35
notification, 35
setting up, 35
66
Index
© 2013 Kyocera Corporation. All rights reserved. Assurance Wireless is a trademark of Virgin Mobile USA,
L.P. The “Virgin” name and the Virgin signature logo are registered trademarks of Virgin Enterprises Limited
and are used under license. All other trademarks are the property of their respective owners. KYOCERA is a
registered trademark of Kyocera Corporation.
This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and NetFront are trademarks or
registered trademarks of ACCESS CO., LTD. in Japan and other countries. This software is based in part on
the work of the Independent JPEG Group.
®
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
Kyocera Corporation is under license. Other trademarks and trade names are those of their respective
owners.
®
Nuance, the Nuance logo, VSuite and T9 are trademarks or registered trademarks of Nuance Communications,
Inc. or its subsidiaries in the United States of America and/or other countries. Copyright © 2008-2013
Nuance Communications, Inc. All rights reserved.
|