KT-10B, KT-10F, KT-10T
KT-10F supports full/half
duplex transmission via its
duplex type selector.
10Base2/-T/-FL Ethernet Transceivers
The KTI Ethernet transceiver family is a IEEE 802.3 compliant Ethernet transceiver series that
provides a complete interface of the AUI port to a thin Ethernet cable, a UTP cable and a Fiber
Optic cable connections.
A complete set of LEDs indicates the diagnostic status between your Ethernet devices and cabling
systems. The compact design makes it flexible to use in a variety of networking devices. KT-10F
supports full/half duplex mode that can be operated between switches, routers, and servers in full-
duplex transmission.
Key Features :
Comply with IEEE 802.3 standard
Product Highlights :
Support network traffic at a rate of 10Mbit/sec
Support Ethernet configuration using CSMA/CD access method based on IEEE 802.3 standard
Compact design
KT-10B:
10Base2 Ethernet Transceiver
KT-10T:
10Base-T Ethernet Transceiver
KT-10F:
10Base-FL Ethernet Transceiver
(Complies with EMI Class B)
Specifications :
Model
KT-10B
KT-10T
KT-10F
Standard
IEEE 802.3 10Base2,
IEEE 802.3 10Base5
IEEE 802.3 10Base-T,
IEEE 802.3 10Base5
IEEE 802.3 10Base-FL,
IEEE 802.3 10Base5
Connector
LEDs
BNC female connector,
AUI DB-15 male connector AUI DB-15 male connector AUI DB-15 male connector
Shielded RJ-45,
Multimode ST connector,
FCC Part 15 Class A
CISPR 22 Class A
'
Power
Power, transmit, receive,
collision, polarity reverse
Transmit, receive, link
and collision
and link
Katron Technologies Inc.
15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-chih, Taipei Hsien, Taiwan.
Tel:886-2-2698-3878
Fax:886-2-2698-3873
E-mail:[email protected]
Special
Features
Selectable terminator,
selectable SQE test
Selectable link test,
selectable SQE test
Full/half duplex switch,
selectable SQE test
Duplex type Half
Half
0OC ~ 40OC
Full/half selectable
KTI Networks Inc.
7400 Harwin Dr., Suite 120 Houston,
Texas 77036 U.S.A.
Environment Operation Temperature:
Relative Humidity:
10% ~ 90% non-condensing
Tel:713-266-3891
Fax:713-914-0555
E-mail:[email protected]
Dimensions 42 x 65 x 20 mm
Power
+12VDC, 250mA max.
Trademarks: All brand names are trademarks or registered
trademarks of their respective holders.
This information is subject to change without prior notice.
080110
|