Kramer Electronics Ventilation Hood WP 306 User Manual

EIA /TIA 568B  
Wire Color  
Orange/White  
Orange  
The Kramer WP-306 Wall Plate  
PIN  
1
Congratulations on purchasing your Kramer WP-306 Wall Plate which is ideal for  
boardrooms and presentation rooms.  
2
3
4
5
6
7
8
Green/White  
Blue  
The WP-306 is a single-gang wall plate insert.  
Blue/White  
Green  
WP-306 Wall Plate US Version  
Figure 1 and Table 1 define the US version of the WP-306 Wall Plate.  
Brown/White  
Brown  
Pair 1  
Pair 2  
Pair 3  
Pair 4  
4 and 5  
1 and 2  
3 and 6  
7 and 8  
Figure 2: RJ-45 Pinout (U.S.)  
WP-306 Wall Plate EU/UK Versions  
Figure 3 and Table 2 define the EU/UK version of the WP-306 Wall Plate.  
Destination England and the rest  
Destination Belgium and Germany  
of Europe (excluding Belgium and  
Germany)  
Rear panel view  
Figure 1: WP-306 Wall Plate US Version Front and Rear View  
Table 1: WP-306 Wall Plate US Version Front and Rear Features  
#
Feature  
Function  
1
ON LED  
Lights red when receiving power (when no signal is detected); lights  
green when receiving a signal  
2
3
HDMI IN Connector  
Connect to the HDMI digital source  
IR OUT 3.5mm Mini Connector  
Connect to a machine via an IR Emitter. Note, that the IR output is  
only compatible with the SV-552  
Figure 3: WP-306 Wall Plate EU/UK Version Front and Rear Views  
Table 2: WP-306 Wall Plate EU/UK Version Front and Rear Features  
4
5
RJ-45 Connector  
Connect to the SV-552 Processor/Controller. Note that the WP-306  
requires BC-DGKat524 or BC-DGKat-623 cable for connection  
DC IN Power Connector  
Connect to the 12V power supply (supplied free)  
#
Feature  
Function  
1
ON LED  
Lights red when receiving power (when no signal is  
detected); lights green when receiving a signal  
Wiring the Twisted Pair RJ-45 Connector  
2
3
HDMI IN Connector  
Connect to the HDMI digital source  
The US versions of the wall plates are equipped with RJ-45 terminals. Figure 2 defines the  
STP pinout using a straight pin to pin cable with RJ-45 connectors. For STP cable, cable  
shielding must be connected/soldered to the connector shield.  
IR OUT 3.5mm Mini Connector  
Connect to a machine via an IR Emitter. Note, that the IR  
output is only compatible with the SV-552  
4
Terminal Block  
Connect to SV-552. Note that the WP-306 requires  
BC-DGKat524 or BC-DGKat-623 cable for connection  
Note: For cabling WP-306 wall plates, use either Kramer BCP-DGKat524 or  
BCP-DGKat623 STP cables.  
5
6
GROUND Connection  
Ring tongue terminal and grounding screw  
Connect to the 12V power supply (included)  
GND +12V 2-pin Power Terminal Block  
 
         

Infinite Peripherals Printer DPP 250 User Manual
Insignia Flat Panel Television NS L37Q 10A User Manual
Ironman Fitness Treadmill Treadmill TRIAD User Manual
Jenn Air Refrigerator JS42FSDBDA User Manual
JVC Computer Monitor DT V20L3D User Manual
JVC DVD Player KD ADV6160 User Manual
Kalorik Fryer USK FT 1 User Manual
Kenmore Water Dispenser 62534551 User Manual
Kenwood Microphone MFJ 284 User Manual
Kidde Smoke Alarm SL177i User Manual