6
“TOUCH IT” TABLE LAMP
KH 4113
KH 4112
KH 4114
“TOUCH IT” TABLE LAMP
Operating instructions
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: KH4112_14-05/09-V2
“TOUCH IT”
TABLE LAMP
KH 4112/13/14
• Clean the table lamp only after you have first
withdrawn the plug from the wall power socket.
Otherwise, there is the great risk of receiving an
electric shock!
Read these operating instructions carefully before
using the appliance for the first time and preserve
this maual for later reference. Pass this manual on to
whoever might acquire the appliance at a future
date.
• Lay the power cable in such a way that no one
can tread on or trip over it.
• This appliance is not intended for use by indivi-
duals (including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
1. Safety instructions
• Children should be supervised to ensure that
they do not play with the appliance..
Danger:
Should moisture/water permeate into the table
lamp, …
Beware of appliance damage!
• The table lamp can be irreparably damaged if
it tips over or falls down! For this reason, always
place the table lamp on a solid, level, slip-proof
surface.
• there is the danger of receiving an electric
shock!
• it may be irreparably damaged!
Thus:
• Use only light bulbs that match the specifications
detailed in these operating instructions.
• Do not use an extension cable. The appliance
plug must be easily accessible in the event of an
emergency.
Do not use or store the table lamp …
• in a humid environment!
• in close proximity to water! Additionally, never
subject the table lamp to spray water or rain.
NEVER place receptacles filled with water or
other fluids, for example flower vases, on the
table lamp!
Risk of fire!
The table lamp and the bulb will become hot
when it is in use!
Risk of Burns!
Hot surfaces. NEVER touch the lamp shade when
Thus:
the appliance is in use.
• Do not cover the table lamp while it is switched
on. Also, do not hang any objects over the table
lamp.
Risk of personal injury!
• Remove the table lamp plug from the wall power
socket before changing the bulb. If the table lamp
was previously switched on: allow the table lamp,
and the bulb that is to be replaced, to first cool
down for at least half an hour.
• Do not place any easily inflammable/combustible
materials in the immediate vicinity of the table
lamp while it is switched on.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
- 1 -
Note:
6. Select a suitable
installation site
For damage resulting from …
• opening of the table lamp base / the transformer
housing
Always place the table lamp on a solid, level, slip-
proof surface.
To avoid malfunctioning, do not place the table
lamp on metallic surfaces.
• attempted repairs made by non-qualified personnel
• improper use of the table lamp
no liability/warranty is accepted!
Do not place any easily inflammable/combustible
materials in the immediate vicinity of the table lamp
while it is switched on. Do not cover the table lamp
while it is switched on. Also, do not hang any ob-
jects over the table lamp.
2. Proper Use
The table lamp is intended exclusively …
Do not place the table lamp on metallic objects.
Otherwise there is a risk of a
short-circuit or fire!
• as an illumination and decorative object for interior
rooms (no damp rooms)
• for domestic, non-commercial use.
7. Preparing the table lamp
for use
3. Items supplied
Table lamp
Operating instructions
1. Carefully remove the table lamp from the packa-
ging.
2. KH 4112/KH 4114: Screw the light bulb 1
(not supplied) into the bulb holder 3.
4. Technical data
3. KH 4113: Carefully remove the lampshade 2
upwards from the table lamp. Loosen the cove-
ring cap 6 from the table lamp. Screw the bulb
1 (not supplied) into the bulb socket 3. Repla-
ce the lampshade 2 back onto the table lamp.
Secure it with the help of the covering cap 6.
4. Unwind the power cable 5 to its full length.
Insert the power cable 5 into a power plug.
Power supply:
Power consumption :
Bulb:
230-240 V 50Hz
~
40 W
40W 230V E14
II
Protection class:
5. Controls
The table lamp is now ready for use.
1 Bulb (not supplied)
2 Lamp shade
3 Socket
4 Base with touch sensor as on/off switch
and dimmer
8. Using the table lamp
• Switch the table lamp on by touching the base 4
with a finger (KH4113: touch the base 4 or the
stand).The table lamp now lights up at the lowest
brightness level.
5 Power cable
6 Covering cap (KH4113 only)
Download from Www.Somanuals.co-m2.-All Manuals Search And Download.
• To switch it to the second brightness level: touch
the base 4 a second time.
10. Cleaning the table lamp
• To switch it on to the third brightness level: Touch
the base 4 once again.
Before cleaning the table lamp, always remove its
power cable from the power socket.
• To switch the table lamp off: touch the base 4
once again.
Clean the table lamp exclusively with a slightly
damp cloth. Ensure that no moisture can permeate
into the lamp!
If you do not wish to use the table lamp for an ex-
tended period of time: Remove the power cable 5
from the power socket. To avoid damage, be care-
ful not to kink the power 5 cable.
Otherwise, there is the great risk of
receiving an electric shock!
11. Troubleshooting
9. Changing the light bulb
Problem
Should the bulb 1 in the table lamp be defect, it
The table lamp does not function.
must be exchanged for a new one. Additionally:
Possible causes / solutions
• Remove the power cable 5 of the table lamp
• Check to ensure that the power cable 5 is inser-
ted into a power socket.
from the power socket.
• Check to see if the light bulb 1 of the table
lamp needs to be replaced. To do this, follow the
steps described in section 9. "Changing the light
bulb".
• Check to see if the power socket where the power
cord 5 is plugged in is "live". To do this,
connect another electrical device to the power
socket.
If the table lamp was previously switched on: Allow
the lamp shade 2 and the light bulb 1 at least a
half-hour to cool down before you continue.
The risk of burns is ever present!
• KH 4112/KH 4114: Screw the light bulb 1 out
of the bulb holder 3 in an anti-clockwise direction.
• KH 4113: Loosen the covering cap 6. Careful-
ly remove the lampshade 2 upwards from the
table lamp. Then screw the old light bulb 1 out
of the bulb holder 3.
• Check to see if the fuse or circuit breaker for the
electrical circuit to which the table lamp is con-
nected has been broken/triggered.
• Screw a new light bulb 1 into the bulb holder 3.
Use exclusively light bulbs of the type E14, 40 W.
• KH 4113: Replace the lampshade 2 onto the
table lamp. Secure it with the help of the cove-
ring cap 6.
Other defects
Contact one of our service partners in your area if …
• the listed functional defects cannot be corrected
as described or
• Insert the power cable 5 into a power socket.
The table lamp is once again ready for use.
• other functional defects arise.
- 3 -
12. Disposal
DES Ltd
Units 14-15
Do not dispose of the appliance in your
Bilston Industrial Estate
Oxford Street
Bilston
normal domestic waste. This product is
subject to the European directive
2002/96/EC.
WV14 7EG
Tel.: 0870/787-6177
Fax: 0870/787-6168
e-mail: [email protected]
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [email protected]
Dispose of all packaging materials in an
environmentally friendly manner.
13. Warranty & Service
14. Importer
The warranty for this appliance is for 3 years from the
date of purchase. This appliance has been
KOMPERNASS GMBH
BURGSTRASSE 21
manufactured with care and meticulously examined
before delivery. Please retain your receipt as proof of
purchase date. Should a claim need to be made un-
der the warranty, please make contact by telephone
with our service department. Only in this way can a
post-free despatch for your goods be assured.
The warranty covers ONLY claims for material and
maufacturing defects, not for wearing or consuma-
ble or for damage to fragile components. This pro-
duct is for private use only and is not intended for
commercial applications.
44867 BOCHUM, GERMANY
The warranty will become void in the event of abusi-
ve and improper handling, use of force and internal
tampering not carried or approved by our authori-
zed service branch. Your statutory rights are not
restricted in any way by this warranty.
Download from Www.Somanuals.co-m4.-All Manuals Search And Download.
|