Klipsch Speaker RCX 4 User Manual

Dual 4'' Two-Way Center-Channel Satellite Loudspeaker  
RCX-4  
The RCX-4 is a low-profile, horizontally  
oriented center channel loudspeaker. Although  
designed primarily to work with the RSX-4 and  
I
Very high sensitivity  
MicroTractrix Horn tweeter for clean, detailed highs  
Dual Cerametallic cone woofers in a Tapered Array configuration to  
I
I
RSX-5 Reference Satellites, which it matches  
maximize clarity  
perfectly both cosmetically and sonically, the  
I
Ball-joint pedestal stand with keyholes allows easy placement  
RCX-4’s sound also blends well with that of  
I
Magnetically shielded to prevent video interference  
other Klipsch loudspeakers, allowing  
maximum flexibility in system configuration. Its  
gracefully contoured, high-rigidity enclosure  
fits easily on any television set, or it can be  
S P E C I F I C A T I O N S  
shelf-, wall-, or ceiling-mounted. An integrated  
ball-joint pedestal stand with bottom keyholes  
makes it easy to place the RCX-4 on any  
convenient surface and direct its sound into  
the listening area.  
BANDWIDTH  
92Hz-20kHz 3dB  
94dB @ 2.83 volts/1 meter  
8 ohms compatible  
2100Hz  
SENSITIVITY  
NOMINAL IMPEDANCE  
CROSSOVER FREQUENCY  
POWER HANDLING  
High frequencies emanate from a 1-inch  
titanium dome compression driver tweeter.  
The round MicroTractrixHorn molded into  
the front of the cast aluminum baffle raises the  
driver’s efficiency and controls its radiation  
pattern to minimize detail-blurring reflections  
from walls, floor, and ceiling. Flanking the  
tweeter are twin 4-inch Cerametallic™cone  
woofers operating as a Tapered Array. Klipsch  
Tapered ArrayTechnology operates both  
woofers at the lowest frequencies and only  
one all the way up to the point where the  
tweeter takes over, eliminating the destructive  
middle-frequency interference between  
woofer outputs characteristic of ordinary  
woofer-tweeter-woofer lineups. Low-  
frequency response extends deep enough to  
mesh seamlessly with the crossovers built into  
A/V receivers, surround processors, and  
powered subwoofers. All drivers are  
magnetically shielded to prevent interference  
with direct-view television sets. As in all  
Reference Series loudspeakers, premium  
crossover components ensure optimum signal  
transfer.  
75 watts (300 watts peak)  
ENCLOSURE TYPE  
DRIVE COMPONENTS  
Bass reflex via dual rear-firing ports  
Two-way system using one 1'' (2.5cm)  
magnetically shielded, titanium dome  
compression driver tweeter with an integral  
round 90˚ MircroTractix Horn and two 4''  
(10.2cm) magnetically shielded, Cerametallic  
cone woofers  
WEIGHT  
HEIGHT  
WIDTH  
DEPTH  
7.5 lbs. (3.4kg) including base  
7.5" (19cm) including base, 5.4" w/out base  
14.8" (37.6cm)  
8.4" (21.3cm)  
FINISH  
MOUNTING  
Black or Silver  
Base swivels 360˚ for on-wall mounting via  
keyholes  
Because of its high power-handling capability  
and unusually high sensitivity, the RCX-4 can  
sustain significantly higher output than most  
similar-size center speakers. And though  
ideally suited for use with other Klipsch  
loudspeakers, it will provide excellent center  
channel sound in any system.  
1-800-KLIPSCH  
 
All specifications are subject to change without notice. ©2004  

Infinity Speaker Beta Tendvc User Manual
IOGear Mouse M1308 User Manual
Jasco Switch HO97864 User Manual
Jensen Automobile Accessories BT 390 User Manual
JVC DVD Player RX DV31 User Manual
JVC Projector Accessories LCT2662 001A User Manual
Kalorik Egg Cooker GR38892 User Manual
KitchenAid Food Processor K5 A User Manual
Kramer Electronics Laser Pointer VP 719xl User Manual
Kramer Electronics Stereo Amplifier 106 User Manual