KitchenAid Cooktop KHIF 9010 User Manual

Instructions for use

Installation diagrams

Important safety information

Safeguarding the environment

Declaration of conformity

Before use

Using existing pots and pans

Recommended pan base diameters

Installation

Electrical connection

Instructions for use

Cleaning

Troubleshooting guide

After-Sales Service

Power level table

Functions table

Cooking table

Installation diagrams

180 mm

310/190 mm

180 mm

MODEL KHIS 9010

MODEL KHIF 9010

Min. 5 cm

Min. 10 cm

5 mm

Min. 3 cm

Max. 6 cm

Installation diagrams

Important safety information

YOUR SAFETY AND THAT OF OTHERS IS

PARAMOUNT

- The appliance is designed solely for household

use for cooking food. No other type of use is

permitted (e.g. heating rooms). The

This manual and the appliance itself provide

important safety messages, to be read and

observed at all times.

Manufacturer declines all responsibility for

inappropriate use or incorrect setting of the

controls.

- The appliance is not intended for use by people

(children included) with physical, sensory or

mental impairment or without experience and

knowledge of the appliance, unless supervised or

previously instructed in its use by those

responsible for their safety.

This is the safety alert symbol, pertaining to

safety, which alerts users to potential hazards to

themselves and others.

All safety messages are preceded by the safety alert

symbol and the following terms:

- Accessible parts become very hot when the

appliance is in operation. Keep children away

from the appliance and supervise them to ensure

that they do not play with it.

- Do not touch the heating elements of the

appliance during and after use to avoid the risk

of burns. Do not allow cloths or other flammable

material to come into contact with the appliance

until all parts have cooled down completely.

- Use oven gloves to remove pans and

accessories, taking care not to touch the heating

elements.

DANGER

Indicates a hazardous situation which, if not

avoided, will cause serious injury.

WARNING

Indicates a hazardous situation which, if not

avoided, could cause serious injury.

All safety messages tell you what the potential

hazard is, how to reduce the risk of injury,

damages and electrical shocks resulting from the

incorrect use of the appliance. Please observe the

following instructions:

- The appliance must be disconnected from the

power supply before carrying out any installation

work.

- Ensure that the installation and maintenance are

performed by a qualified technician, following

the manufacturer's instructions and in

compliance with current local safety regulations.

Do not repair or replace any part of the

appliance unless specifically stated in the user

manual.

- Do not place flammable material on or near the

appliance: a fire may break out if the appliance is

inadvertently switched on.

- Overheated oils and fats catch fire easily. Never

leave the appliance unattended when cooking

with fat and oil.

- Do not place metal objects, such as kitchen

utensils (knives, forks, spoons, lids, etc.), on the

cooking zone as they can become very hot.

- Insert a separator panel (not supplied) in the

compartment beneath the appliance.

- If the surface of the hob should become

damaged (cracked or broken glass), do not use

the appliance and call the After-Sales Service

immediately.

- Regulations require that the appliance is earthed.

- The power cable must be long enough for

connecting the appliance, once fitted in its

housing, to the power supply.

- The appliance is not intended to be operated by

means of an external timer or separate remote

control system.

- Observance of safety directives requires that a

multi-pole switch with a minimum contact gap of

3 mm be used for the installation.

- Do not use multiple plug adapters or extension

leads.

- Do not pull the power cable to disconnect it

from the electrical supply.

- The electrical components must not be

accessible to the user after installation.

- Do not touch the appliance with wet parts of the

body or use it when barefoot.

Disposal of household appliances

- This product is built from recyclable or reusable

materials. Disposal must be carried out in

accordance with local regulations for waste

disposal. Before scrapping, cut off the power

supply cable.

- For further information on the treatment,

recovery and recycling of household appliances,

contact the competent local authority, the

domestic waste collection service or the shop

where you purchased the product.

Safeguarding the environment

Disposal of packaging materials

Energy saving

The packaging material is entirely recyclable and

For optimum results, observe the following advice:

• Use pots and pans whose bottom diameter is

equal to that of the cooking zone.

• Only use flat-bottomed pots and pans.

• If possible, keep pot lids on during cooking.

• Cook vegetables, potatoes, etc. with little water

in order to reduce cooking time.

marked with the recycling symbol (

). Do not

dispose of the various packaging materials

carelessly, but do so responsibly and in full

compliance with local authority regulations

governing waste disposal.

Scrapping

• Use a pressure cooker to save even more

energy and time (do not use in "SENSOR"

mode).

• Make sure you place the pot or pan in the

centre of the cooking zone outlined on the hob.

This appliance is marked in compliance with

European Directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly,

you will help prevent potential negative

consequences for the environment and human

health.

The symbol

on the appliance or accompanying

documentation indicates that this product should

not be disposed of as unsorted municipal waste but

must be taken to a collection point for the

treatment of WEEE.

Declaration of conformity

This appliance is designed to come into contact

requirements of "Low Voltage" Directive

2006/95/EC (replacing 73/23/EEC as amended) and

protection requirements of "EMC" Directive

2004/108/EC.

with food and complies with Regulation (

) no.

1935/2004, and has been designed, constructed

and marketed in compliance with the safety

Before use

IMPORTANT: the cooking zones will not switch on if pots and pans are not of the

correct dimensions. Only use pots bearing the symbol "INDUCTION SYSTEM"

(See figure opposite). Before switching the hob on, position the pot on the desired

cooking zone.

Using existing pots and pans

Use a magnet to check whether pots or pans are suitable for use on the induction hob: pots are unsuitable

if they cannot be magnetically detected.

Ensure pots have a smooth bottom, otherwise they may scratch the hob's glass ceramic surface. Check

dishes.

Never place hot pots or pans on the hob's control panel. This could result in damage.

Recommended pan base diameters

Ø 18 cm

Ø 14 cm

Ø 30 cm

Ø 24 cm

Ø 18 cm

Ø 28 cm

(Dual zone)

30 cm

(Dual zone)

28 cm

Ø 21 cm

Ø 17 cm

Ø 14 cm

24 cm

Ø 15 cm

Ø 11 cm

21 cm

Ø 14,5 cm

18 cm

14,5 cm

IMPORTANT: Refer to the "SENSOR" section for correct pan base diameters for cooking zones with

SENSOR function.

Installation

After unpacking the hob, check that there has been no damage during

transport. If in doubt, contact the dealer or After-Sales Service.

PREPARING THE HOUSING UNIT

WARNING

Install a separator panel under the hob.

The lower part of the product must not be accessible after

installation.

If there is an oven beneath the hob, do not install the separator

panel.

• For the distance between the underside of the appliance and the

separator panel below, observe the dimensions given in the figure.

• Do not obstruct the minimum required clearance between the hob and

the top of the unit to ensure the correct operation of the product.

• Cut the worktop to fit before installing the hob and carefully remove

any shavings or sawdust.

min 20 mm

min 5 mm

• If there is an oven beneath the hob, check it has a cooling system.

• For flush-mounting, call the After-Sales Service to fit screw kit 4801 211 00112 supplied with the

product.

• Do not install the hob over a dishwasher or washing machine, as the electronic circuits could become

damaged by steam and humidity.

Electrical connection

WARNING

Disconnect the appliance from the mains power supply.

Installation must be carried out by a qualified electrician who is fully aware of current safety

and installation regulations.

The manufacturer declines all liability for injury to persons or animals and for damage to

property resulting from failure to observe the regulations provided in this chapter.

The power supply cables must be long enough to allow the hob to be removed from the

worktop.

Make sure the voltage specified on the appliance rating plate is the same as that of the

house electrical system.

Do not use an extension cord.

Connecting to the terminal board

If the hob already has two power supply cables provided, follow the instructions in the bag attached to the

cable.

Connect the cables to the two terminal boards present on the bottom of the product.

IMPORTANT: for 400 V 3N~ connection only, use only one power supply cable (connecting it to the

terminal board of the main electronic module) in addition to the 3 x 1.5 mm wiring to connect the main

terminal board to that of the auxiliary electronic module. For electrical connection, see the instruction

attached to the 3 x 1.5 mm wiring.

Electrical connection

If the hob does not have power supply cables provided, for electrical connection, use two H05RR-F type

cables (to be connected to the two terminal boards) as indicated in the table below.

400 V 3N ~

230 V ~

230-240 V ~ (Australia only)

230 V ~ (UK only)

Conductors

230 V ~ +

Amount x size

3 x 4 mm

3 x 4 mm (Australia only)

230-240 V ~ +

230 V 3 ~ +

400 V 3N ~ +

400 V 2N ~ +

4 x 1,5 mm

5 x 1,5 mm

4 x 1,5 mm

400 V 2N ~

230 V 3 ~

400 V 2N ~

(NL only)

(Belgium only)

Connect the yellow/green earth wire to the terminal with the symbol

This wire must be longer than the other wires.

1. Remove the terminal block cover (A), undoing the screw and inserting the cover in the terminal block

hinge (B).

2. Strip approx. 70 mm of sheath from the power supply cable.

3. Strip approx. 10 mm of sheath from the wires. Insert the power supply cable into the cable clamp and

connect the wires to the terminal board as indicated in the diagram next to the terminal board itself.

4. Secure the power cable with the cable clamp.

5. Close the cover (C) and screw it on the terminal block with the removed screw - point (1).

Repeat the same procedure for the second terminal board.

Each time the cooktop is connected to the mains it carries out an automatic check which lasts several

seconds.

Connect the appliance to the mains electricity supply using a multipole switch disconnector with minimum

contact gap of 3 mm.

Instructions for use

Control Panel Description

The control panel is equipped with touch controls: to use them, just press the corresponding symbol (a

light touch is sufficient).

To select and activate the cooking zones

To activate the

flexible zone

function

Switching/

the hob

ON/OFF

To enable the

hold function

To set the

minute minder

To select one of the

automatic functions

Slide touchscreen

To lock the

control panel

First use / after a power failure

After connecting the hob to the electrical power supply, the control panel is locked (the indicator light

above the key is ON).

To unlock the control panel, press and hold the

and the hob can be used normally.

key for 3 seconds. The indicator light switches off

Switching the hob ON/OFF

To switch the hob on, press and hold down the

key for about 2 seconds: the indicator light above the

key turns on and hyphens appear inside the cooking zone circles.

To switch off, press the same key until the hob switches off. All the cooking zones are deactivated.

The hob automatically switches off if no function is selected within 10 seconds of switching on.

Activating and adjusting cooking zones

Indicates that one of the

automatic functions is On

Cooking zone timer

Cooking zone selection and

selected cooking zone/power

level display

Slide touchscreen

(power adjustment)

After switching the hob on, position a pot on the required cooking zone.

Activate the cooking zone by pressing the relative round key: the round key displays number

corresponds to the intermediate power level.

that

Instructions for use

If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions

for your induction hob, the message "no pot" will appear in the display (see figure on the left). If no pot is

detected within 60 seconds, the hob switches off.

To change the power level, move your finger horizontally on the slide touchscreen: the number inside

the circle will change with just a quick slide of the finger from a minimum of 1 to a maximum of 9. You can

activate the booster function by pressing "BOOST" on the slide touchscreen ("P" on the display). The

"BOOST" power level can be used for up to 10 minutes, after which the appliance automatically switches

to level 9. If more than one cooking zone is on, the slide touchscreen allows you to change the power

level of the selected zone, indicated by the presence of a luminous dot at the bottom right of the power

level indicator. To select a zone, simply press the relative round key.

Deactivating cooking zones

Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the

bottom right of the power level indicator). Press OFF on the slide touchscreen.

The cooking zone switches off and, if the zone is still hot, the letter "H" appears in the circle.

"H" is the residual heat indicator. The hob has a residual heat indicator for each cooking zone; these

indicators alert the user when cooking zones are still hot. When the cooking zone cools down, the display

switches off.

Timer selection

The timer can be used to set a max cooking time of 90 minutes.

Select the cooking zone to be used with the timer (a luminous dot appears at the bottom right of the

power level indicator on the display), then set the required time using the + and - keys of the timer

function: the time in minutes is shown next to the cooking zone display.

A few seconds after the last press, the timer begins the countdown (the cooking zone selection dot starts

flashing).

Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.

For the timer associated with the SENSOR function, refer to the description of the function on the

following pages.

Control panel lock

This function locks the hob controls to prevent accidental activation (e.g. during cleaning).

Press the

key for three seconds: an acoustic signal sounds and an indicator light turns on above the

lock symbol to confirm activation. The control panel is locked with the exception of the OFF function. To

unlock the controls, repeat the activation procedure. The luminous dot goes off and the hob is active

again.

IMPORTANT: The presence of water, liquid spilled from pots or any objects resting on the key below the

symbol can accidentally activate or deactivate the control panel Lock function.

Hold

This function allows you to temporarily hold and then resume cooking processes maintaining previous

settings (except for SENSOR function and timer setting). Press the

place of the power levels. To resume cooking, press the key again.

key:

blinks on the display in

Instructions for use

Flexible Zone

This function allows you to use two cooking zones as an extra-large single zone. It is perfect for oval,

rectangular and elongated pans (with maximum base dimensions of 40x18 cm). After switching on the hob,

press the

key: the two cooking zone displays show level "5"; both dots next to the level number

are alight, indicating selection as a single cooking zone. To change the power level, slide your finger on the

touchscreen: the number inside the circle will change with just a quick slide of the finger from a minimum

of 1 to a maximum of 9. To deactivate the flexible zone function, press the

key: the plates resume

operation as two separate cooking zones. To switch off the cooking zone, press OFF.

The booster power level and SENSOR function cannot be used in conjunction with the flexible zone

function. If you use the timer, the time will appear next to the display of the highest plate.

Description of automatic functions

The hob features automatic functions for each cooking zone. The symbols of the available functions

are shown next to the selection key of each cooking zone. Every time an automatic function is selected, an

indicator light turns on next to the symbol and the letter "A" appears in the cooking zone display.

SENSOR

The SENSOR function automatically selects the ideal power level to bring water to the boil and signals

boiling point.

After positioning the pot containing water on the zone displaying the word SENSOR, switch on the hob

and select the zone. Press the

key: "A" appears on the display and the indicator light turns on. An

animation is displayed in the space next to the zone as it heats up.

To ensure correct operation of the SENSOR function, we recommend that you:

- use water only (at ambient temperature);

- do not add salt, ingredients or seasoning (until boiling point);

- do not change the zone's power level, remove or move the pot;

- use pots and pans with base diameter between 17 and 19 cm;

- fill the pot to at least 1/3 full (at least 1litre of water) but never to the brim (max 5 litres);

- do not use pressure cookers.

For optimum results, please also observe the following advice:

- do not put the lid on the pot that is being used with the SENSOR function;

- do not activate the SENSOR function if the zone is still hot (letter "H" on the display).

When the boiling point is reached, the hob emits an acoustic signal. The acoustic signal sounds three times

at regular intervals. After the second signal, a minute counter automatically begins counting the boiling

time. After the third signal, the hob automatically selects a lower power level suitable for maintaining the

boil. From this moment you can add the ingredients, set the timer or change the power level.

Changing the power level or activating the hold function, the SENSOR function is deactivated.

- The hob manages the SENSOR function and booster levels autonomously, therefore, in some cases, it

may not be possible to activate the booster with the SENSOR function already in use;

- the quality of the cookware may affect the performance of the SENSOR function.

Multifunction key

This key allows you to select the simmering, melting or keep warm function with a specific cooking zone.

After selecting the zone, press the

key; the indicator light near the special function symbols next to

each cooking zone indicates the automatic function selected. Press the

required function.

key repeatedly to set the

Instructions for use

Simmering

Bring the food to boiling point then press the relative key

to select the simmering function; an

appropriate power level will be set automatically to keep it just under boiling point. To deactivate the

function, simply press OFF on the slide touchscreen.

Melting

This function maintains a permanently low temperature in the cooking zone. After positioning the

pot/accessory on the chosen cooking zone, switch on the hob and select the cooking zone. Press the

key repeatedly to select the function. To deactivate the function, simply press OFF on the slide

touchscreen.

Keep Warm

Identifies a power level that is suitable for keeping meals warm. After positioning the pot/accessory on the

chosen cooking zone, switch on the hob and select the cooking zone. Press the

key repeatedly to

select the function. To deactivate the function, simply press OFF on the slide touchscreen.

GRIDDLE

This function allows you to grill various types of food using the specific accessory.

Only use the accessory supplied.

The use of any other accessory may compromise the performance of the function.

Position the accessory on the cooking zone displaying the word "GRIDDLE". Press the

key, an

indicator light turns on above the key and the letter "A" appears simultaneously on the display. When the

hob has almost finished heating the accessory, a beep will sound every 30 seconds three times. You can

now put the food in the pot. At the second beep, a minute counter starts to measure the time that the

accessory has been at the ideal temperature.

When the GRIDDLE function is in use, the "flexible zone" and "booster" functions cannot be activated

on the same cooking zone.

Cleaning

WARNING

Never use steam cleaners.

Before cleaning, make sure the cooking zones are switched off and that the residual heat

indicator ("H") is not displayed.

IMPORTANT: do not use abrasive sponges or pan scourers. as they could ruin the glass surface.

• Clean the hob, when it is cool, after each use in order to remove any food residues.

• Sugar and foods with a high sugar content damage the glass ceramic surface and must be immediately

removed.

• Salt, sugar and sand can scratch the glass surface.

• Use a soft cloth, absorbent kitchen wipes or a specific hob cleaner (follow the Manufacturer's

instructions).

Troubleshooting guide

• Read and follow the instructions given in the section "Instructions for use".

• Connect the hob to the electricity supply and check that the supply has not been shut off.

• Clean the hob and dry it thoroughly.

• If you are unable to turn the hob off after using it, disconnect it from the power supply.

• If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table

for instructions.

ERROR CODE

DESCRIPTION

POSSIBLE CAUSES

REMEDY

The hob switches off

and after 30 seconds

emits an acoustic signal

every 10 seconds.

Continuous pressure on Water or utensils on

Clean the control panel.

control panel area.

The control panel

control panel.

C81, C82, C83

The internal

Wait for the hob to cool

down before using it

again.

switches off because of temperature of

excessively high

temperatures.

electronic parts is too

high.

F42 or F43

The connection voltage The sensor detects a

Disconnect the hob

from the mains and

check the electrical

connection.

is wrong.

discrepancy between

the appliance voltage

and that of the mains

supply.

F12, F21, F25, F36, F37, Call the After-Sales Service and specify the error code.

F40, F47, F56,

F58, F60, F61, F62, F63,

F64

After-Sales Service

Before contacting the After-Sales Service

1. See if you can eliminate the problem on your own by referring to the "Troubleshooting guide".

2. Turn the hob off and on again to check if the problem has been eliminated.

If the fault persists after the above checks, contact the nearest After-Sales Service.

Always specify:

• a brief description of the fault;

• the type of product and exact model;

• the Service number (the number after the word "Service" on the rating plate) located under the

appliance (on the metal plate). The Service number is also given in the warranty booklet;

• your full address;

• your telephone number and area code.

Place one of the two stickers giving the

product data (included in the warranty

booklet) here.

If any repairs are required, please contact an authorised After-Sales Service (to guarantee that original

spare parts will be used and repairs carried out correctly). Replacement parts will be available for 10 years.

Power level table

Level use

Power level

Type of cooking

(indicating cooking experience and habits)

Ideal for rapidly increasing the temperature of

food to fast boiling in the case of water or rapidly

heating cooking liquids.

Boost

8-9

To heat quickly.

To fry - boil

Max.

power

Ideal for browning, starting to cook, frying deep

frozen products, fast boiling.

Ideal for sautéing, maintaining a lively boil, cooking

and grilling (for a short period of time, 5-10

minutes).

To brown - sauté - boil -

grill.

7-8

Ideal for sautéing, maintaining a light boil, cooking

and grilling (for a medium period of time, 10-20

minutes), preheating.

High

power

To brown - cook - stew

sauté - grill

6-7

To cook - stew

sauté - grill

Ideal for stewing, maintaining a gentle boil,

cooking and grilling (for a long period of time).

4-5

Ideal for long-cooking recipes (rice, sauces, roasts,

fish) with liquids (e.g. water, wine, broth, milk),

creaming pasta.

3-4

Medium

power

To cook - simmer -

thicken - cream pasta

Ideal for long-cooking recipes (quantities under 1

litre: rice, sauces, roasts, fish) with liquids (e.g.

water, wine, broth, milk).

2-3

Ideal for softening butter, gently melting chocolate;

thawing small products.

1-2

To melt - thaw

Low

power

Ideal for keeping small portions of just-cooked

food or serving dishes warm and for creaming

risotto.

To keep food warm

To cream risotto

Zero

power

Hob in stand-by or off mode (possible end-of-

cooking residual heat, indicated by an "H").

OFF

Support surface

Functions table

Function

Description of automatic functions

Identifies a power level that is suitable for simmering long-cooking

recipes. Suitable for cooking tomato sauce, ragu, soups, minestrone,

maintaining a constant cooking level; ideal for cooking in a bain-marie

(creams) and regenerating cooked food. Prevents food from boiling over

or sticking to the bottom and burning, as often happens with these

recipes. Use this function after bringing the food to boiling point.

Simmering

Identifies a power level that is suitable for slowly melting delicate

products without compromising their sensorial quality (chocolate, butter,

etc.).

Melting

Identifies a power level that is suitable for keeping meals or serving

dishes warm.

Keep warm

Automatically senses when the water reaches the boiling point and

reduces the power to maintain the boil until the food is added. When the

water reaches the boiling point, an acoustic signal indicates that you can

add the desired ingredients (e.g. seasoning,

Sensor

pasta, rice, vegetables, meat and fish to be boiled), but also homemade

preserves or accessories to be sterilised.

This function combines two cooking zones to offer an extra-large

cooking surface for rectangular and oval containers or grilling pans.

To grill large or many food items (fish, kebabs, vegetables, steaks,

wurstels).

Flexible zone

To cook recipes with liquids or broth such as roulades and whole fish in

casseroles/fish kettles/pans.

Designed to be used exclusively with the accessory supplied. This

function automatically identifies a power level that is ideal for grilling

various types of food.

Griddle

Wait until the function signals that the accessory is preheated, then place

food on it. The accessory supplied provides uniform heat distribution that

ensures perfect grilling of any type of food (meat, fish, vegetables); e.g.

kebabs, steaks, hamburgers, slices of fish, wurstels, cheese, vegetables.

Cooking table

Power level and cooking status

Food

Dishes or type of