Kambrook - Australia
Kambrook - New Zealand
Building 2, Port Air Industrial Estate
1A Hale Street
Private Bag 94411
Botany, Manukau
Botany NSW 2019
Auckland 2163
Australia
New Zealand
Customer Service Line 1300 139 798
Customer Service Fax 1800 621 337
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax 0800 288 513
Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue D11
KFA413B_IB_D11_FA.indd
1
28/07/11 3:29 PM
Contents
Kambrook Recommends
Safety First
p3
p5
p6
p7
Your Kambrook Arctic
Pedestal Fan
Using Your Kambrook
Arctic Pedestal Fan
Care and Maintenance
Important
Please retain your instruction
book for future use.
In the event that you need some assistance with your
Kambrook appliance, please contact our Customer Service
Department on 1300 139 798 (Australia) or 0800 273 845
(New Zealand). Alternatively, visit us on our website at
KFA413B_IB_D11_FA.indd
2
28/07/11 3:29 PM
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Arctic Pedestal Fan
• Carefully read all instructions before
operating the Kambrook Arctic
Pedestal Fan for the first time and save
for future reference.
• Do not unplug the fan by pulling on
the cord.
• Never leave the fan unattended when
in use.
• To protect against electric shock, do no
immerse the fan, cord or plug in water
or any other liquid
• This fan is intended for household
use only and not for commercial or
industrial use. Disconnect the power
plug before dismantling, assembling or
before cleaning and when the fan is
not in use.
• Never carry the fan by the cord or yank
to disconnect from an outlet; instead,
grasp the cord and pull to disconnect.
Do not pull the cord around sharp
edges or corners.
• Avoid touching mobile parts of the fan.
• Ensure the fan is on a dry and
even surface.
• Never insert fingers, pencils or any other
objects through the guards whenever
the power plug is connected, in
particular while the fan is switched on.
• The fan must not be used if the guards
are not fastened correctly, according
to these instructions.
• Do not operate in the presence of
explosives and/or flammable fumes
or liquids.
3
KFA413B_IB_D11_FA.indd
3
28/07/11 3:29 PM
Important Safeguards For All
Electrical Appliances
• Always turn the appliance to the OFF
• Carefully read all instructions before
operating the appliance and save for
future reference.
• Remove and safely discard all
packaging material and promotional
labels before using the appliance for
the first time.
position, switch off at the power outlet
and unplug at the power outlet when
the appliance is not in use.
• Before cleaning, always turn the
appliance to the OFF position, switch
off at the power outlet, unplug at
the power outlet and remove the
power cord, if detachable, from the
appliance and allow all parts to cool.
• Do not place this appliance on or near
a heat source, such as hot plate, oven
or heaters.
• Position the appliance at a minimum
distance of 20cm away from walls,
curtains and other heat or steam
sensitive materials and provide
adequate space above and on all
sides for air circulation.
• Fully unwind the power cord before use.
• Do not let the power cord hang over
the edge of a bench or table, touch
hot surfaces or become knotted.
• To protect against electric shock, do
not immerse the power cord, power
plug or appliance in water or any other
liquid, unless it is recommended in the
cleaning instructions.
• The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance, by a
person responsible for their safety.
• Children should be supervised to
ensure that they do not play with the
appliance.
• It is recommended to inspect the
appliance regularly. Do not use
the appliance if the power supply
cord, plug, connector or appliance
becomes damaged in anyway. Return
the entire appliance to the nearest
authorised Kambrook Service Centre
for examination and/or repair.
• Any maintenance other than cleaning
should be performed at an authorised
Kambrook Service Centre.
• This appliance is for household use only.
Do not use this appliance for other than
its intended use. Do not use in moving
vehicles or boats. Do not use outdoors.
Misuse may cause injury.
• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice
4
KFA413B_IB_D11_FA.indd
4
28/07/11 3:29 PM
Your Kambrook Arctic Pedestal Fan (KFA413 shown)
1. Fan blade size: 40cm
2. Choice of 3 speed settings
Parts List
9. Front grille with securing clips
and screw
10. Rear grille
11. Blade cap and guard locking nut
12. Plastic fan blade
13. Motor head and stand
14. Pedestal extension tube
15. Height adjustment ring
16. 2 piece criss-cross base
17. Criss-cross collar
3. 80° oscillation to disperse the air
throughout the room
4. Easy twist controller switch
5. Height adjustable for
comfort control
6. Tilt adjustable head to control the
direction of the air
7. Metal grille and plastic blades
8. Convenient carry handle for
easy portability
5
KFA413B_IB_D11_FA.indd
5
28/07/11 3:29 PM
Using Your Kambrook Arctic Pedestal Fan
Before First Use
Remove any promotional material from
the fan.
IMPORTANT: When
unpacking the fan, check
to see you have received
all the items listed in the
Parts List, before discarding
the packaging.
Fig. 2
3. Place the motor head housing onto
the Pedestal Extension Tube.
Assembling Your Arctic
Pedestal Fan
4. Tighten the screw to secure the
motor head housing to the Pedestal
Extension Tube.
Base and Pedestal Tube Assembly
1. Interlock the criss-cross bases.
Remove the four screws from the
criss-cross bases, and align these
four holes with those on the flange.
Secure the flange to the criss-cross
bases with the four screws. This might
require a bit of force.
Fan Head Assembly
1. Remove the Blade Cap from the
Motor shaft by turning it clockwise,
and then remove the Guard Locking
Nut by turning it anti-clockwise.
2. Thread the Motor shaft through the
centre hole of the Rear Grille, placing
the Rear Grille into position. Make sure
that the carry handle, on the back of
the Rear Grille is located above the
motor housing. Ensure the Rear Grille
is aligned with the locating pins and
fix the grille into position by replacing
the Guard Locking Nut. Make sure that
the Rear Grille has not slipped off the
locating pins before tightening. This
should be done by hand. Do not force.
Fig. 1
NOTE: When positioning the
Rear Grille on the Motor shaft,
always ensure the carry handle
on the grille is positioned in the
upright position.
2. Loosen and remove the Height
Adjustable Ring. Slide the criss-cross
collar over the support tube. (Fig.
2) Extend the support tube. A bit of
force may be required to grasp the
support tube, located inside the
Pedestal Extension Tube. Re-attach
and tighten the Height Adjustment
Ring to prevent slipping.
3. Insert the Plastic Blade onto the Motor
shaft, and match the pin slots in the
blade with the Motor shaft pin.
4. Fix the blade into place by tightening
the Blade Cap onto the Motor shaft in
an anti-clockwise direction. This should
be done by hand. Do not force.
6
KFA413B_IB_D11_FA.indd
6
28/07/11 3:29 PM
5. Unlatch the Securing Clips on the
Front Grille and unscrew the small
screw located at the bottom of the
front guard.
Setting the Oscillation
The oscillation function works in all air
flow settings.
Press down the Oscillation switch to
activate. The fan will begin to oscillate
from side to side.
6. Align and press together the Front
and Rear Grille, and secure by
snapping shut the Securing Clips
over edges of both grilles. Make sure
that the small holes at the bottom of
both grilles are aligned. Tighten the
Securing Clips by hand.
Lift the Oscillation switch to stop the fan
from oscillating.
NOTE: The Oscillation switch is
located behind the Rear Grille,
on the Motor head housing.
7. Thread the screw through the small
holes of both the front and back grilles,
and tighten using the nut provided.
To Operate the Arctic
Pedestal Fan
Plug the cord into a 230V or 240V power
point and switch on.
Adjustable Tilting Head
The Arctic Pedestal Fan incorporates an
Adjustable Tilt Head for greater
air coverage.
To adjust the angle of the head,
while securely holding the shaft of the
pedestal tube, simply lift or lower the
Motor head housing, the head will click
as it is being adjusted.
NOTE: To avoid an electrical
circuit overload, it is
recommended that no other
appliances are plugged into the
same circuit as your fan when it
is in use.
Adjustable Height
The Arctic Pedestal Fan height can
be adjusted.
Use the Twist Controller Switch to select
the desired air flow speed setting.
0 – The fan is in the ‘OFF’ position
Simply loosen the Height Adjustable Ring
on the Pedestal Tube of the fan. Then
adjust to the required height. Re-tighten
the Height Adjustable Ring when the
desired height has been reached.
1 – Low
2 – Medium
3 – High
Care and Maintenance
Always switch the Arctic Pedestal Fan off,
prior to cleaning the housing, base, grilles
and blades.
To clean the outside of the fan, wipe the
exterior with a soft, damp cloth. Never use
an abrasive cleaner.
When not in use, store the fan (preferably
in its original box) in a cool, clean and
dry location.
Fig. 3
7
KFA413B_IB_D11_FA.indd
7
28/07/11 3:29 PM
|