Technical documentation
GIGA X9c Professional
Supplied as standard
Requirements for installation location
Z Automatic speciality coffee machine
Z Drip drain set
Z Horizontal surface that is not sensitive to water
Z Ambient conditions:
Z Reinforced hose, 3/8" – 3/4" (with 90° bend)
Z Cappuccino cleaner, 1000 ml
Z Welcome Pack:
U Air humidity max. 80%
U Ambient temperature 10–35°C
E The required connections at the customer's premises
must be carried out by an approved qualified person
before the JURA service technician can set up the GIGA
at your chosen location.
U Instructions for use
U Cleaning tablets
U Air intake pipe
U Silicone hose and connector
U Set of brushes
E Please make sure that the building connections are as
close as possible to the location of the machine (refer
to length of connection pipes).
U Set of spanners
Always note the information in the instructions for use for
your coffee machine (Chapter 1 "Preparing and using for
the first time" – "Requirements for first-time use" / "Setting
up the machine").
1 / 4
GIGA X9c Professional
Holes for coffee grounds disposal and drip drain set
Position of separate holes in work surface for permanent water connection and drain hose
Hole diameter: min. 40 mm (hose diameter: 35 mm)
Hole diameter: min. 30 mm (hose diameter: 20 mm)
58
102
160
1
1
2
Position of permanent water connection
Position of drain hose
2
E Minimum distance between holes and machine: 40 mm
3
Position of shared hole in work surface for permanent water connection and drain hose
Hole diameter: min. 60 mm
58
102
160
1
1
2
Position of permanent water connection
Position of drain hose
2
E Minimum distance between holes and machine: 40 mm
3
3 / 4
GIGA X9c Professional
Position of hole in work surface for coffee grounds disposal
58
102
160
1
2
3
3
Position of tube section for coffee grounds disposal
Hole diameter: min. 70 mm
4 / 4
GIGA X9c Professional
|