Quick Start Guide
1 Power Up
(
)
• PLUG IN JAWBONE FOR 50 MINUTES YES, THERE’S AN AC ADAPTER IN THE BOX
2 Pair
• PHONE BLUETOOTH® SETTING: ON
• JAWBONE AUTOMATICALLY GOES INTO PAIRING MODE FIRST TIME ON
• ALL OTHER TIMES: HOLD JAWBONE TALK AND NOISEASSASSIN™ BUTTONS: 2 SECONDS
• INDICATOR LIGHT FLASHES RED + WHITE
• PHONE: ‘SEARCH FOR NEW DEVICES’
• SELECT JAWBONE, ENTER PASSCODE ‘0000’
3 Share
(
)
• MAKE THAT CALL GO CHANGE THE WORLD, WE KNOW YOU CAN
Jawbone Overview
a NoiseAssassin Button
b Talk Button
c Voice Activity Sensor
d Earbud
e Earloop
n o t e Both Talk Button
and NoiseAssassin
The medium sized earloop and
earbud are already fitted to
your Jawbone at the factory.
Button are hidden
beneath the external
face of the headset. To
activate either button,
simply press on the
areas indicated above.
1 Charging
•
•
•
•
Charge the battery fully on first use.
Charge time 50 minutes.
80% charge after 35 minutes.
Indicator light is RED
while headset is charging / WHITE when headset
is fully charged.
Indicator light flashes RED when battery is low.
•
•
You can charge your Jawbone headset via
the wall charger, or via USB on your computer.
Place the Jawbone headset in the socket
with the jawbone logo facing upward.
•
(continue to page 2)
|